Post Buy Requirement
PM
Pune, Maharashtra, India
Add Review

Our Products

  1. Trolleys 3 Products available
  2. Tapes 5 Products available
  3. Road Safety & Traffic Products 4 Products available
  4. Bandages 6 Products available
  5. Others 67 Products available

Other Products / Services #4622415

Cam Rollers

Track runner bearings are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.
These bearings have a thick-walled outer ring, which enables them to accommodate shock loads, while reducing distortion and bending stresses.
The outer ring running surface is crowned as standard.
This is beneficial for applications where angular misalignment relative to the track may occur or where edge stresses need to be minimized.
View Complete Details

Temperature Sensing Foley Catheter

  • Size ( Fr) 8, 10, 12, 14, 16, 18, 20, 22, 24
  • Colour Code Light Blue, Black, White, Green, Orange, Red etc
For urinary drainage and simultaneous monitoring of core body temperature.
Dual-purpose design can be used before, during or after surgery.
Colour-coded hubs for size identification.
Positive-locking connector for secure cable attachment.
Fully compatible with most monitor.
Safe, non toxic components.
Complete range of sizes.
Available single sterile or can be delivered in your Custom procedural tray.
Certified as safe for use in Magnetic Resonance (MR) environment at 1.5 Tesla by third party in accordance with ASTM international standard F2052.
Cables avaliable in 400 series and 700 series.
Latex safe.
View Complete Details

Microplate Reader

The Microplate reader reads test results reducing subjectivity in interpretation. The Strip Washer automatically washes single strips or full plates with a syringe driven fluid delivery system for precise control over the fluid flow rate.
View Complete Details

Microbial Luminescence Systems

Results available approximately 48 hours sooner than traditional methods
Reduces stock holding requirements and improves responsiveness to customers
Time saved improves cash flow
Allows quality performance to be tracked over time
High levels of support and service
View Complete Details

NG Luminometer

Helps reduce risk of cross contamination due to poor cleaning
Simplicity allows easy implementation into your business with minimal training commitment
Provides a tool to allow you to track and improve your hygiene performance
Adds value to your results by allowing you to generate powerful management reports for continuous improvement
Helps protect your reputation
View Complete Details

ATP Water Hygiene Test Kit

Allows you to understand the hygiene status of your CIP system in seconds
Helps reduce risk of cross contamination due to poor cleaning
Allows optimization of Biocide programs
Helps protect your reputation
View Complete Details

Surface Protein Plus

Provides a tool to help improve your hygienic performance
Real time results allow immediate corrective action
Offers you the opportunity to show due diligence
Minimal investment no instrument required
Minimal training required, can be used by all staff
Helps protect your reputation
View Complete Details

Salmonella Visual Immunoassay

Results within 42 hours
All reagents provided
Fill orders sooner based on a rapid result
Option to use a single selective enrichment broth protocol [AOAC OMA 998.09]
Can be used manually, semi-automated
View Complete Details

Medication Bin Cart

  • Features Storage of medication , Total locking system.
  • Top Plate Polyproplyene & Stainless Steel
  • Guard rail Aluminum
  • Caster 5 inch
Designed to supply the medication when nurse make around of visit to patient. installed multi-bin containers at rear side to make easy and multi purposed storing. Multi structure can be possible using various kind of accessories. it's ergonomic designed push handle and efficient structure. it comes with total lockng key system. cassette type ( for dose system). it has upgraded efficiency of storing and mobility. Each drawer had ABS basket with well organizing dividers. The 5 inches casters provides good and clam rolling properties.
View Complete Details

X-Ray Film System

  • Weight 4.5 kg
  • Features Slim and Attractive Design. , User Friendliness.
  • Model PPM-1000
  • Size (LxDxH) mm 485 x 25 x 510
  • Lamp CCFL (4 Lamps)
Elegant interior attractive appearance with 25 mm thickness making efficient space saving.

TFT-LCD backlighted display without eye fatigue. Excellent illumination of over 7000 lux.

Permanent CCFL slim lamps with long life time of 20, 000 hr, it's provent more accurate film reading via uniform light.

Low power concumption of 2.0 to 5 W. it is switch ype with high frequency for power supply.
View Complete Details

Emergency Cart

  • Features Designed to manage a first-aid patient in emergency.
  • Top Plate Polyproplyene & Stainless Steel
  • Caster 5 inch
  • Dust box ABS plastic
Designed to manage a first-aid patient in emergency. Ergonomic designed push-handle and efficient structure. Side storage had various kind of model. Total locking key system. Colour : Red, Yellow, Blue, Green.

Handy tilt bins manufactured for fitting to side storage items. Can store various kind of nurse's items, more safely and usefully keeping all necessary items, than also easily exchanged when empty. Each drawer had ABS baskets with well organising dividers Calmed and good rolling 5 inched casters with brake.
View Complete Details

Esd Heel Strap

  • Features Made from ESD two layer rubber material. , 1 Meg ohm resistance.
  • Inner layer Static dissipative
  • Outer layer Conductive
ESD heel strap or ESD heel grounder are made from 2 layer rubber material. There is no constraint of size, Suitable for use for visitors or production operator. It provide mobility for operator. It is use with ESD tile to dissipate the charges from the human body, prevent demage from the sensitive component.
View Complete Details

Antistatic EVA Slipper

  • Feature Soft and comfortable , Flexible and Antistatic property is impregnated
  • Surface Resistance < 10 E 6 Ohm
  • Body to ground resistance 2.17 E 6 Ohm/sq
  • Available size Small, Medium, Large, X-Large
ESD Slipper are made from EVA material, it is soft and comfortable, anti slip properties. Suitable for industry that involved microelectronics assembly and packing where static control is a concern. This slipper is tested is able to meet ESD standard of ANSI
View Complete Details

ESD Over Boot

  • Surface Resistance 10 E8 to 10 E9 Ohm
  • Available size Small, Medium, Large
  • Features Customise Legging for customer requirement. and Autoclavable
The steel toe cap provide protection to the personnel in his working environment. The legging are customise to suit customer requirement on specification and colour. Refer to fabric for more details. Personnel does not need to remove the normal working shoe. This overboot are wore over the normal shoe. Pro-Pack have the capability to perform shoe test on our ESD flooring. Do contact us for more information on the testing method
View Complete Details

Static Dissipative Safety Boot

  • Feature PU sole for comfortable wearing , anti slip properties
  • Available size : 230, 240, 250, 260, 270, 280, 290, 300
  • Resistance to ground 10 E6 to 10 E8 Ohm
The steel toe cap provide protection to the personnel in his working environment. The legging are customise to suit customer requirement on specification and colour. Pro-Pack have the capability to perform shoe test on our ESD flooring. Do contact us for more information on the testing method.
View Complete Details

Static Dissipative ESD Safety Shoe

  • Feature Durable , Steel Toe Cap
  • Surface Resistance 10 E7 to 10 E9 Ohm
  • Available size 230, 240, 250, 260, 270, 280, 290, 300
ESD static dissipative Shoe are made from PU material with direct injection moulding method. It is oil resistance and thus non slip.
View Complete Details

Disposable Sticky Mat

  • Size 24" x 36", 26" x 45"
  • Thickness 30, 40 micron
  • Feature Made from PR material. , Remove dirt and dust from footwear
Disposable sticky mat are used at doorway to remove dirt and dust from footwear before personal enter into the production area. It comes in 30 peelable sheets per mat. It is used in environment where dust and dirt is critical to the operation. Generally used in electronic manufacturing, hospital theatre, cleanroom, bio lab, wafer fab, solar manufacturing and pharmaceutical manufacturing company.
View Complete Details

Non Woven Shoe Cover

  • Size 15 cm x 36 cm, 15 cm x 42 cm ( +/- 1 cm)
  • Feature Made from 100% non woven spunlace. and Good Strength
Dispsoable non woven shoe cover are made from 100% non woven spunlace, it is used to cover the shoe before entering into dust sensitive area. The shoe cover is secure through a elastic band. There are two sizes available. It is used to prevent contamination of foot wear in cleanroom. It is widely used in Electronic, Cleanroom where ESD is a concern.
View Complete Details

Disposable Bouffant Cap

  • Size 21 inches
  • Feature PP Non Woven Material
  • Packing 100 pcs / bag, 2000 pcs / ctn
  • Colour Blue
Disposable mob cap are made from 100 % non woven material. It has complete hair covering made from soft comfortable, thermally bonded light polypropylene fibre with an encapsulated elastic edge. The high air permeability provides good ventilation to the head. Suitable for use in electronic manufacturing, restaurants, food processing and hospital.
View Complete Details

Conductive PU Glove

  • Feature 5 mm conductive grid interval and Polyurethane palm coated for better grip.
Conductive polyester PU glove are made from 100% polyester with conductive yarn weaves together. The palm is PU coated for better grip. Use in production assembly or PCB manufacturing.
View Complete Details

Antistatic Finger Cot

  • Feature 100% pure natural latex.
  • Surface Resistance 10 E9 Ohm
ESD finger cot are widely use in electronic industry to protect contamination to the product and the personnel. Suitable for use in class 100 cleanroom environment. it is use in handling thin films, optics and precision assembly. ESD finger cot are made from 100% pure natural rubber latex. comes in standard colour of pink. Option of finger tip textured for better grip.
View Complete Details

Conductive Polyurethane Foam

  • Feature Carbon and Polyurethane. , Non corrosive.
  • Resistace reading 1.0 E 3 to 1.0 E5 Ohm
  • Standard size 1m x 1m x 5mm
Conductive polyurethane (PU) foam are widely use is packing of ESD sensitive components. It provide a good cushion for the part to be ship. It comes in standard size of 1 ms 1 mx 5 mm thick. Pro-Pack have in house facility to customise the design for any special requirement.
View Complete Details

Nano-multilayer Barrier Film

  • Feature Static sheilding material. , Conductive PE material. and Amide free material.
Pro-Pack have the facility to make PE, Aluminium, Conductive, Bubble, Amide silicon free material. Thus, we are able to laminate, combine any of the material to achieve those special needs that our customer are looking for.

Pro- Pack had worked with value customers to achieve the required packaging for their products.
View Complete Details

Antistatic Double Layer Bubble

  • Features Excellent shock absorbing. , Non corrosive. and Light weight.
A permanent antistatic cushioning material, is made of low density polyethylene containing an internal antistat, implanted in the polymer matrix. It exhibits excellent cushioning properties due to the regular dense air bubbles, trapped between two layers of antistatic polyethylene film.
View Complete Details

Conductive Pe Bag

  • Feature Low volume or surface resistance , Consistent is properties
Pro-Pack have the facility in Malaysia that customise varies sizes. Conductive PE bag are made from pure virgin material resin. Mateirial is homogeneous Conductive material provides EMI RFI shielding and ESD control, excellent grounding properties, good for handling explosive powders, PCB assemblies and components. Use in packing electronic products that is sensitive to ESD or packing of explosive materials.
View Complete Details

Conductive Angle PCB Rack

  • Size 325 x 205 x 93 mm.
  • Feature Conductive ABS material.
  • Loading capacity : 31 pcs
  • Surface resistivity 10 E 4 ohm / sq
Conductive angle rack are made from conductive ABS material. Used in production line for storing of PCB during rework or assembly process.
View Complete Details

ESD Moulded Tote Boxes

  • Conductive range < 10 5 ohm / sq.
  • Static Dissipative range 10 5 ohm / sq - 10 12 ohm / sq.
  • Features High Impact Strength. , Maximum space strength.
ESD boxes offers safe and efficient storage of items in bulk or compartmentalized models with use of optional dividers. Accessories are available in any of the three different materials to meet specific needs of today's parts and handling requirements.
View Complete Details

Conductive Pen

  • Features Carbon Fibre material. , Suitable for use in Cleanroom.
Conductive pen are made from conductive PP fibre material, it does not particulate and can achieve a resistnace reading of 10 E5 Ohm. No metal contamination in the handling of the hard material parts. the base material has very high chemical and thermal resistance.
View Complete Details

Cleanroom Spiral Notebook

  • Size A4, A5, A6
  • Code 5307-0001, 5307-0002, 5307-0003
Clean paper made from natural pulp
With ruled lines or Checkered for easy writing
50 sheets per book (inclusive of cover)
Weight : 72 Gsm or 80 Gsm
Resistivity : < 10 E11 ohm sq
Colour : Sky Blue
Sizes Available : A4 and A5
View Complete Details

Board Tester

  • Features Auto-learning and Automatic Program Generation of Open / Short, Pin information, IC Clamping Diode, TestJet Technology.
MDAs provide all-analog testing of printed circuit board assemblies (PCBAs). The distinctive feature of the TR518 lies with its fast testing speed, which is twice as fast as traditional MDAs. Furthermore; it possesses a more programmable short and open circuit learning setting, satisfying different varieties of test products and their behaviors.
View Complete Details

Oriteq Ionizing Nozzle

  • Features Neutralize static charges effectively. , Different tubes available. and Low noise.
Piezo ionizing nozzle can neutralize charges in confine area. Power by low violtage power supply and compress air, the ion are brough to the surface to neutralize the surface easily.
View Complete Details

ESD Homogenous Mat

  • Resistivity < 1.0 E6 Ohm / Sq
  • Features Material is Conductive
Conductive mat is widely used on production area to remove static charge from the work surface. The mat must be properly grounding using grounding cord. please refer to grounding cord for more details.
View Complete Details

Oriteq Preheater, Ladle Preheater

  • Power 460 W
  • Temperature range 120 ℃ - 250 ℃
  • Air volume 0.18 m3 /min

We are offering a wide range of oriteq preheater, Ladle Preheater. Repid heating only 10s to reach 250 degree Built- in temperature sensor, stable output temperature Cool or hot air can be selected to preheat or cool chips The preheater can be used with rework stations to process BGA or other flake ICs.

View Complete Details

Vampire Vacuum Pen

  • Features ESD Safe. , Two different tips.
Vampire is the new battery-free hand held vacuum pick up pen designed for the safe pick-up of SMD components during assembly, test and rework processes. With fountain-pen dimensions, Vampire grabs, lifts and places components in complete safety, aided by a powerful internal piston and a full ESD protection. A complete choice of tips designed for any size of SMD component helps the operator to have always the right tool in hand.
View Complete Details

Round Nose ESD Plier

  • Feature High quality ball bearing steel. and Matched bearing rings in order to minimize metal-metal conta
  • Overall length 133 mm
  • Jaws length 20 mm
  • Box width 10 mm
  • Box thickness 6, 4 mm
Round nose pliers have jaws formed by two long cones. A round nose pliers is generally used both to clamp and to form loops on leads or wire. The long jaws also provide increased access.
View Complete Details

Stainless Steel Bush

Stainless Steel Bush
Standard: Non-standard
Material: SS316LSS304SS316
Size: As your drawing
Moq: 100pcs
Packing: plastic bag+carton+pallet
View Complete Details

Sliding Stretcher Cart

  • Features Folded bed side rail. , Central locking system. and Sliding Mattress
  • Size 2020 x 660 x 530 ~ 830 mm
  • Frame Steel pipe
  • Body Aluminum
Bed side rails are provided and can be folded with a one touch operation. It comes with an easy to electric operate switch that controls the hi low position, enabling the stretcher to be adjusted to match the height of the bed. All four wheels can be locked or unlocked by means of a single pedal operation. A center wheel is equipped under the stretcher.
View Complete Details

Compression Stockinette

  • Features Easy split on and split off ,
  • Colour Beige
  • Standard length 10 m
It is made from 100 % elasticed cotton.

A tubular elasticted bandage to give firm support for sprains strains and weak joins.

Provide quick and easy to split on and split off, and even through several times on and off still can provide even pressur
View Complete Details

Disposable Tubing Clamp

  • Feature Positive lock , Accurate pressure. and Excellent for dialysis tubing
The tubing clamp is effective on thin and thick wall tubing. Its smooth jaws completely occlude the tube without cutting. The positive lock has five precision ratchets to accurately provide the necessary pressure. This clamp is excellent for dialysis tubing.
View Complete Details

Conductive Strap Polyester Fabric

  • Features ESD Safe Material., Good Fluid repellent. and Good Antimicrobial Properties.
Conductive fabric is a densely woven 100% filament polyester designed to meet the quality and performance standards demanded by the protective apparel industry.
View Complete Details

Crimped Wire Cup Brushes

  • Feature Highly flexible , Fast cutting
Crimped Wire Cup Brushes are designed for light- to medium-duty brushing applications on flat or irregular surfaces, and bevel buffing.

Powder-coated, red-colored hubs won't rust, preventing cross-contamination for the end-user. For steel applications.
View Complete Details

Non-Woven Surface Prep Hook

New resin system, aerospace-tailored
Smear-free, even on high nickel content alloys
Will not load on aluminum and soft metals, as competitive products may
Proprietary new coating method
Thick layer of grain throughout the product extends life; grain does not sit on top of fibers as other competitive products may
Extended form holding
Will not fly off rotary sanders
Discs sit flatter on back-up pads, resulting in a more consistent finish on DA applications
Good choice for light deburring and blending operations
Provide better grain utility while remaining flexible
View Complete Details

Emery Sheet

  • Features P-graded, aluminum oxide abrasive and Tough and durable
A general purpose sandpaper sheet, ideal for general duty dry sanding of paint, primers, ilight metals and woods.
View Complete Details

Emery Cloth

  • Feature Natural emery abrasive , Soft by nature, for light abrading and sanding
Emery Cloth coated abrasive sanding sheets are used for removing light burrs and cleaning and polishing metals. May be used dry or with oil.
View Complete Details

FastTrack Belt

Cut-off Wheels - Precision Toolroom offers you all of the advantages of a major coated abrasives manufacturer combined with the benefits of a fast coated abrasive belt convertor. Available for metalworking or woodworking applications.
View Complete Details

Cut-off Wheels

  • Features Aluminum oxide abrasive for fast cut rate and long life , Burn-free cutting
These reinforced aluminum oxide abrasive cut-off wheels are used for precision toolroom applications, primarily for cutting off high speed steel drill bits and end mills, as well as slotting dies. Reinforced cut-off wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped.
View Complete Details

Non-woven Hand Pad

Fibratex hand pads are available in a variety of grains and grit sizes. The non-woven nylon, low density pads are impregnated with abrasive grain. Easy to fold, they offer excellent conformability and flexibility.
View Complete Details

Reflecting Jackets

  • Feature Highly reflective , Reflective tapes in front and back
Reflective Jackets are extensively used by the traffic control individuals. These jackets are specially designed keeping in mind the comfort of the individuals and also the pattern as per the traffic rules and regulations. Our assortment of jackets glows when the light falls on these jackets assisting the traffic individuals to control the traffic in competent manner and dropping the risk of accident. These jackets are offered in different designs and sizes as per the clients preference and are known for light in weight and moisture resistant features.
View Complete Details

Thermoplasting Road Marking Paint

  • Features Color stability , Superior weathering resistance and Excellent wear resistance
Thermoplastic Road Marking Paint is the best marking system and is premixed with glass beads evidently visible and reflective throughout day and night. The paint is offered in both yellow and white colors with exceptional shine and whiteness. Our paint is examined and approved by quality auditors and are made available as per the requirements of our clients and can be offered at industry leading prices. Further, this paint is environmentally friendlier with no carcinogenic solvents used.
View Complete Details

Bollard Barricading

  • Features Rigid construction , Immaculate finish and Elegant design pattern
Barricading Fence is idyllically utilized for safety & security application specially to control traffic flow and crowd. These fencings are precisely designed by using the high quality materials to ensure their optimum durability and rigidity. This range of fencing is obtainable in various sizes, designs, colors and patterns to meet with the application requirements.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ganesh (Pro-Pack Materials India Private Limited)
  • GAT No. 516, Wagholi Katkewadi, Pune Nagar Highway, Maharashtra - 412207, India
  • Share us via
List of Other Products by Pro-Pack Materials India Private Limited from Pune, Maharashtra.
Post Buy Requirement
PM
Pune, Maharashtra, India
Add Review

Our Products

  1. Tapes 5 Products available
  2. Road Safety & Traffic Products 4 Products available
  3. Bandages 6 Products available
  4. Trolleys 3 Products available
  5. Others 67 Products available

Other Products / Services #4622415

Cam Rollers

Track runner bearings are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.These bearings have a thick-walled outer ring, which enables them to accommodate shock loads, while reducing distortion and bending stresses.The outer ring running surface is crowned as standard.This is beneficial for applications where angular misalignment relative to the track may occur or where edge stresses need to be minimized.
View Complete Details

Temperature Sensing Foley Catheter

  • Size ( Fr) 8, 10, 12, 14, 16, 18, 20, 22, 24
  • Colour Code Light Blue, Black, White, Green, Orange, Red etc
For urinary drainage and simultaneous monitoring of core body temperature.Dual-purpose design can be used before, during or after surgery.Colour-coded hubs for size identification.Positive-locking connector for secure cable attachment.Fully compatible with most monitor.Safe, non toxic components.Complete range of sizes.Available single sterile or can be delivered in your Custom procedural tray.Certified as safe for use in Magnetic Resonance (MR) environment at 1.5 Tesla by third party in accordance with ASTM international standard F2052.Cables avaliable in 400 series and 700 series.Latex safe.
View Complete Details

Microplate Reader

The Microplate reader reads test results reducing subjectivity in interpretation. The Strip Washer automatically washes single strips or full plates with a syringe driven fluid delivery system for precise control over the fluid flow rate.
View Complete Details

Microbial Luminescence Systems

Results available approximately 48 hours sooner than traditional methodsReduces stock holding requirements and improves responsiveness to customersTime saved improves cash flowAllows quality performance to be tracked over timeHigh levels of support and service
View Complete Details

NG Luminometer

Helps reduce risk of cross contamination due to poor cleaningSimplicity allows easy implementation into your business with minimal training commitmentProvides a tool to allow you to track and improve your hygiene performanceAdds value to your results by allowing you to generate powerful management reports for continuous improvementHelps protect your reputation
View Complete Details

ATP Water Hygiene Test Kit

Allows you to understand the hygiene status of your CIP system in secondsHelps reduce risk of cross contamination due to poor cleaningAllows optimization of Biocide programsHelps protect your reputation
View Complete Details

Surface Protein Plus

Provides a tool to help improve your hygienic performanceReal time results allow immediate corrective actionOffers you the opportunity to show due diligenceMinimal investment no instrument requiredMinimal training required, can be used by all staffHelps protect your reputation
View Complete Details

Salmonella Visual Immunoassay

Results within 42 hoursAll reagents providedFill orders sooner based on a rapid resultOption to use a single selective enrichment broth protocol [AOAC OMA 998.09]Can be used manually, semi-automated
View Complete Details

Medication Bin Cart

  • Features Storage of medication , Total locking system.
  • Top Plate Polyproplyene & Stainless Steel
  • Guard rail Aluminum
  • Caster 5 inch
Designed to supply the medication when nurse make around of visit to patient. installed multi-bin containers at rear side to make easy and multi purposed storing. Multi structure can be possible using various kind of accessories. it's ergonomic designed push handle and efficient structure. it comes with total lockng key system. cassette type ( for dose system). it has upgraded efficiency of storing and mobility. Each drawer had ABS basket with well organizing dividers. The 5 inches casters provides good and clam rolling properties.
View Complete Details

X-Ray Film System

  • Weight 4.5 kg
  • Features Slim and Attractive Design. , User Friendliness.
  • Model PPM-1000
  • Size (LxDxH) mm 485 x 25 x 510
  • Lamp CCFL (4 Lamps)
Elegant interior attractive appearance with 25 mm thickness making efficient space saving. TFT-LCD backlighted display without eye fatigue. Excellent illumination of over 7000 lux. Permanent CCFL slim lamps with long life time of 20, 000 hr, it's provent more accurate film reading via uniform light. Low power concumption of 2.0 to 5 W. it is switch ype with high frequency for power supply.
View Complete Details

Emergency Cart

  • Features Designed to manage a first-aid patient in emergency.
  • Top Plate Polyproplyene & Stainless Steel
  • Caster 5 inch
  • Dust box ABS plastic
Designed to manage a first-aid patient in emergency. Ergonomic designed push-handle and efficient structure. Side storage had various kind of model. Total locking key system. Colour : Red, Yellow, Blue, Green. Handy tilt bins manufactured for fitting to side storage items. Can store various kind of nurse's items, more safely and usefully keeping all necessary items, than also easily exchanged when empty. Each drawer had ABS baskets with well organising dividers Calmed and good rolling 5 inched casters with brake.
View Complete Details

Esd Heel Strap

  • Features Made from ESD two layer rubber material. , 1 Meg ohm resistance.
  • Inner layer Static dissipative
  • Outer layer Conductive
ESD heel strap or ESD heel grounder are made from 2 layer rubber material. There is no constraint of size, Suitable for use for visitors or production operator. It provide mobility for operator. It is use with ESD tile to dissipate the charges from the human body, prevent demage from the sensitive component.
View Complete Details

Antistatic EVA Slipper

  • Feature Soft and comfortable , Flexible and Antistatic property is impregnated
  • Surface Resistance < 10 E 6 Ohm
  • Body to ground resistance 2.17 E 6 Ohm/sq
  • Available size Small, Medium, Large, X-Large
ESD Slipper are made from EVA material, it is soft and comfortable, anti slip properties. Suitable for industry that involved microelectronics assembly and packing where static control is a concern. This slipper is tested is able to meet ESD standard of ANSI
View Complete Details

ESD Over Boot

  • Surface Resistance 10 E8 to 10 E9 Ohm
  • Available size Small, Medium, Large
  • Features Customise Legging for customer requirement. and Autoclavable
The steel toe cap provide protection to the personnel in his working environment. The legging are customise to suit customer requirement on specification and colour. Refer to fabric for more details. Personnel does not need to remove the normal working shoe. This overboot are wore over the normal shoe. Pro-Pack have the capability to perform shoe test on our ESD flooring. Do contact us for more information on the testing method
View Complete Details

Static Dissipative Safety Boot

  • Feature PU sole for comfortable wearing , anti slip properties
  • Available size : 230, 240, 250, 260, 270, 280, 290, 300
  • Resistance to ground 10 E6 to 10 E8 Ohm
The steel toe cap provide protection to the personnel in his working environment. The legging are customise to suit customer requirement on specification and colour. Pro-Pack have the capability to perform shoe test on our ESD flooring. Do contact us for more information on the testing method.
View Complete Details

Static Dissipative ESD Safety Shoe

  • Feature Durable , Steel Toe Cap
  • Surface Resistance 10 E7 to 10 E9 Ohm
  • Available size 230, 240, 250, 260, 270, 280, 290, 300
ESD static dissipative Shoe are made from PU material with direct injection moulding method. It is oil resistance and thus non slip.
View Complete Details

Disposable Sticky Mat

  • Size 24" x 36", 26" x 45"
  • Thickness 30, 40 micron
  • Feature Made from PR material. , Remove dirt and dust from footwear
Disposable sticky mat are used at doorway to remove dirt and dust from footwear before personal enter into the production area. It comes in 30 peelable sheets per mat. It is used in environment where dust and dirt is critical to the operation. Generally used in electronic manufacturing, hospital theatre, cleanroom, bio lab, wafer fab, solar manufacturing and pharmaceutical manufacturing company.
View Complete Details

Non Woven Shoe Cover

  • Size 15 cm x 36 cm, 15 cm x 42 cm ( +/- 1 cm)
  • Feature Made from 100% non woven spunlace. and Good Strength
Dispsoable non woven shoe cover are made from 100% non woven spunlace, it is used to cover the shoe before entering into dust sensitive area. The shoe cover is secure through a elastic band. There are two sizes available. It is used to prevent contamination of foot wear in cleanroom. It is widely used in Electronic, Cleanroom where ESD is a concern.
View Complete Details

Disposable Bouffant Cap

  • Size 21 inches
  • Feature PP Non Woven Material
  • Packing 100 pcs / bag, 2000 pcs / ctn
  • Colour Blue
Disposable mob cap are made from 100 % non woven material. It has complete hair covering made from soft comfortable, thermally bonded light polypropylene fibre with an encapsulated elastic edge. The high air permeability provides good ventilation to the head. Suitable for use in electronic manufacturing, restaurants, food processing and hospital.
View Complete Details

Conductive PU Glove

  • Feature 5 mm conductive grid interval and Polyurethane palm coated for better grip.
Conductive polyester PU glove are made from 100% polyester with conductive yarn weaves together. The palm is PU coated for better grip. Use in production assembly or PCB manufacturing.
View Complete Details

Antistatic Finger Cot

  • Feature 100% pure natural latex.
  • Surface Resistance 10 E9 Ohm
ESD finger cot are widely use in electronic industry to protect contamination to the product and the personnel. Suitable for use in class 100 cleanroom environment. it is use in handling thin films, optics and precision assembly. ESD finger cot are made from 100% pure natural rubber latex. comes in standard colour of pink. Option of finger tip textured for better grip.
View Complete Details

Conductive Polyurethane Foam

  • Feature Carbon and Polyurethane. , Non corrosive.
  • Resistace reading 1.0 E 3 to 1.0 E5 Ohm
  • Standard size 1m x 1m x 5mm
Conductive polyurethane (PU) foam are widely use is packing of ESD sensitive components. It provide a good cushion for the part to be ship. It comes in standard size of 1 ms 1 mx 5 mm thick. Pro-Pack have in house facility to customise the design for any special requirement.
View Complete Details

Nano-multilayer Barrier Film

  • Feature Static sheilding material. , Conductive PE material. and Amide free material.
Pro-Pack have the facility to make PE, Aluminium, Conductive, Bubble, Amide silicon free material. Thus, we are able to laminate, combine any of the material to achieve those special needs that our customer are looking for. Pro- Pack had worked with value customers to achieve the required packaging for their products.
View Complete Details

Antistatic Double Layer Bubble

  • Features Excellent shock absorbing. , Non corrosive. and Light weight.
A permanent antistatic cushioning material, is made of low density polyethylene containing an internal antistat, implanted in the polymer matrix. It exhibits excellent cushioning properties due to the regular dense air bubbles, trapped between two layers of antistatic polyethylene film.
View Complete Details

Conductive Pe Bag

  • Feature Low volume or surface resistance , Consistent is properties
Pro-Pack have the facility in Malaysia that customise varies sizes. Conductive PE bag are made from pure virgin material resin. Mateirial is homogeneous Conductive material provides EMI RFI shielding and ESD control, excellent grounding properties, good for handling explosive powders, PCB assemblies and components. Use in packing electronic products that is sensitive to ESD or packing of explosive materials.
View Complete Details

Conductive Angle PCB Rack

  • Size 325 x 205 x 93 mm.
  • Feature Conductive ABS material.
  • Loading capacity : 31 pcs
  • Surface resistivity 10 E 4 ohm / sq
Conductive angle rack are made from conductive ABS material. Used in production line for storing of PCB during rework or assembly process.
View Complete Details

ESD Moulded Tote Boxes

  • Conductive range < 10 5 ohm / sq.
  • Static Dissipative range 10 5 ohm / sq - 10 12 ohm / sq.
  • Features High Impact Strength. , Maximum space strength.
ESD boxes offers safe and efficient storage of items in bulk or compartmentalized models with use of optional dividers. Accessories are available in any of the three different materials to meet specific needs of today's parts and handling requirements.
View Complete Details

Conductive Pen

  • Features Carbon Fibre material. , Suitable for use in Cleanroom.
Conductive pen are made from conductive PP fibre material, it does not particulate and can achieve a resistnace reading of 10 E5 Ohm. No metal contamination in the handling of the hard material parts. the base material has very high chemical and thermal resistance.
View Complete Details

Cleanroom Spiral Notebook

  • Size A4, A5, A6
  • Code 5307-0001, 5307-0002, 5307-0003
Clean paper made from natural pulpWith ruled lines or Checkered for easy writing50 sheets per book (inclusive of cover)Weight : 72 Gsm or 80 GsmResistivity : < 10 E11 ohm sqColour : Sky BlueSizes Available : A4 and A5
View Complete Details

Board Tester

  • Features Auto-learning and Automatic Program Generation of Open / Short, Pin information, IC Clamping Diode, TestJet Technology.
MDAs provide all-analog testing of printed circuit board assemblies (PCBAs). The distinctive feature of the TR518 lies with its fast testing speed, which is twice as fast as traditional MDAs. Furthermore; it possesses a more programmable short and open circuit learning setting, satisfying different varieties of test products and their behaviors.
View Complete Details

Oriteq Ionizing Nozzle

  • Features Neutralize static charges effectively. , Different tubes available. and Low noise.
Piezo ionizing nozzle can neutralize charges in confine area. Power by low violtage power supply and compress air, the ion are brough to the surface to neutralize the surface easily.
View Complete Details

ESD Homogenous Mat

  • Resistivity < 1.0 E6 Ohm / Sq
  • Features Material is Conductive
Conductive mat is widely used on production area to remove static charge from the work surface. The mat must be properly grounding using grounding cord. please refer to grounding cord for more details.
View Complete Details

Oriteq Preheater, Ladle Preheater

  • Power 460 W
  • Temperature range 120 ℃ - 250 ℃
  • Air volume 0.18 m3 /min

We are offering a wide range of oriteq preheater, Ladle Preheater. Repid heating only 10s to reach 250 degree Built- in temperature sensor, stable output temperature Cool or hot air can be selected to preheat or cool chips The preheater can be used with rework stations to process BGA or other flake ICs.

View Complete Details

Vampire Vacuum Pen

  • Features ESD Safe. , Two different tips.
Vampire is the new battery-free hand held vacuum pick up pen designed for the safe pick-up of SMD components during assembly, test and rework processes. With fountain-pen dimensions, Vampire grabs, lifts and places components in complete safety, aided by a powerful internal piston and a full ESD protection. A complete choice of tips designed for any size of SMD component helps the operator to have always the right tool in hand.
View Complete Details

Round Nose ESD Plier

  • Feature High quality ball bearing steel. and Matched bearing rings in order to minimize metal-metal conta
  • Overall length 133 mm
  • Jaws length 20 mm
  • Box width 10 mm
  • Box thickness 6, 4 mm
Round nose pliers have jaws formed by two long cones. A round nose pliers is generally used both to clamp and to form loops on leads or wire. The long jaws also provide increased access.
View Complete Details

Stainless Steel Bush

Stainless Steel BushStandard: Non-standardMaterial: SS316LSS304SS316Size: As your drawingMoq: 100pcsPacking: plastic bag+carton+pallet
View Complete Details

Sliding Stretcher Cart

  • Features Folded bed side rail. , Central locking system. and Sliding Mattress
  • Size 2020 x 660 x 530 ~ 830 mm
  • Frame Steel pipe
  • Body Aluminum
Bed side rails are provided and can be folded with a one touch operation. It comes with an easy to electric operate switch that controls the hi low position, enabling the stretcher to be adjusted to match the height of the bed. All four wheels can be locked or unlocked by means of a single pedal operation. A center wheel is equipped under the stretcher.
View Complete Details

Compression Stockinette

  • Features Easy split on and split off ,
  • Colour Beige
  • Standard length 10 m
It is made from 100 % elasticed cotton. A tubular elasticted bandage to give firm support for sprains strains and weak joins. Provide quick and easy to split on and split off, and even through several times on and off still can provide even pressur
View Complete Details

Disposable Tubing Clamp

  • Feature Positive lock , Accurate pressure. and Excellent for dialysis tubing
The tubing clamp is effective on thin and thick wall tubing. Its smooth jaws completely occlude the tube without cutting. The positive lock has five precision ratchets to accurately provide the necessary pressure. This clamp is excellent for dialysis tubing.
View Complete Details

Conductive Strap Polyester Fabric

  • Features ESD Safe Material., Good Fluid repellent. and Good Antimicrobial Properties.
Conductive fabric is a densely woven 100% filament polyester designed to meet the quality and performance standards demanded by the protective apparel industry.
View Complete Details

Crimped Wire Cup Brushes

  • Feature Highly flexible , Fast cutting
Crimped Wire Cup Brushes are designed for light- to medium-duty brushing applications on flat or irregular surfaces, and bevel buffing. Powder-coated, red-colored hubs won't rust, preventing cross-contamination for the end-user. For steel applications.
View Complete Details

Non-Woven Surface Prep Hook

New resin system, aerospace-tailoredSmear-free, even on high nickel content alloysWill not load on aluminum and soft metals, as competitive products mayProprietary new coating methodThick layer of grain throughout the product extends life; grain does not sit on top of fibers as other competitive products mayExtended form holdingWill not fly off rotary sandersDiscs sit flatter on back-up pads, resulting in a more consistent finish on DA applicationsGood choice for light deburring and blending operationsProvide better grain utility while remaining flexible
View Complete Details

Emery Sheet

  • Features P-graded, aluminum oxide abrasive and Tough and durable
A general purpose sandpaper sheet, ideal for general duty dry sanding of paint, primers, ilight metals and woods.
View Complete Details

Emery Cloth

  • Feature Natural emery abrasive , Soft by nature, for light abrading and sanding
Emery Cloth coated abrasive sanding sheets are used for removing light burrs and cleaning and polishing metals. May be used dry or with oil.
View Complete Details

FastTrack Belt

Cut-off Wheels - Precision Toolroom offers you all of the advantages of a major coated abrasives manufacturer combined with the benefits of a fast coated abrasive belt convertor. Available for metalworking or woodworking applications.
View Complete Details

Cut-off Wheels

  • Features Aluminum oxide abrasive for fast cut rate and long life , Burn-free cutting
These reinforced aluminum oxide abrasive cut-off wheels are used for precision toolroom applications, primarily for cutting off high speed steel drill bits and end mills, as well as slotting dies. Reinforced cut-off wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped.
View Complete Details

Non-woven Hand Pad

Fibratex hand pads are available in a variety of grains and grit sizes. The non-woven nylon, low density pads are impregnated with abrasive grain. Easy to fold, they offer excellent conformability and flexibility.
View Complete Details

Reflecting Jackets

  • Feature Highly reflective , Reflective tapes in front and back
Reflective Jackets are extensively used by the traffic control individuals. These jackets are specially designed keeping in mind the comfort of the individuals and also the pattern as per the traffic rules and regulations. Our assortment of jackets glows when the light falls on these jackets assisting the traffic individuals to control the traffic in competent manner and dropping the risk of accident. These jackets are offered in different designs and sizes as per the clients preference and are known for light in weight and moisture resistant features.
View Complete Details

Thermoplasting Road Marking Paint

  • Features Color stability , Superior weathering resistance and Excellent wear resistance
Thermoplastic Road Marking Paint is the best marking system and is premixed with glass beads evidently visible and reflective throughout day and night. The paint is offered in both yellow and white colors with exceptional shine and whiteness. Our paint is examined and approved by quality auditors and are made available as per the requirements of our clients and can be offered at industry leading prices. Further, this paint is environmentally friendlier with no carcinogenic solvents used.
View Complete Details

Bollard Barricading

  • Features Rigid construction , Immaculate finish and Elegant design pattern
Barricading Fence is idyllically utilized for safety & security application specially to control traffic flow and crowd. These fencings are precisely designed by using the high quality materials to ensure their optimum durability and rigidity. This range of fencing is obtainable in various sizes, designs, colors and patterns to meet with the application requirements.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ganesh (Pro-Pack Materials India Private Limited)
  • GAT No. 516, Wagholi Katkewadi, Pune Nagar Highway, Maharashtra - 412207, India
  • Share us via