Product / Services
Post Buy Requirement
PP
Pro- Pack Materials Private Limited
Bangalore, Karnataka, India
Add Review
Call Now

Our Products

  1. Bandages 4 Products available
  2. Test Kits 3 Products available
  3. Home Cleaning Products 3 Products available
  4. Cosmetics, Hair Care & Beauty Products 3 Products available
  5. Hospital & Surgical Clothes 5 Products available
  6. Others 85 Products available

Other Products / Services #4622403

Auto Autoanalysis System Kit

Auto Autoanalysis System Kit

  • Features PFM-711A Field Meter with Analog Output Cable CPM-720A Charge Plate Assembly PCS-730 ± 1KV Charging Source and Charging Wand PDT-740B Static Decay Timer PHT-771 Digital Psychrometer
PGA-710 Auto Autoanalysis System KitPFM-711A Field Meter with Analog Output CableCPM-720A Charge Plate AssemblyPCS-730 1KV Charging Source and Charging WandPDT-740B Static Decay TimerPHT-771 Digital PsychrometerPWS-610M Wrist Strap (2)GAP-005 Ground Adapter PlugPAB-40 Accessories BoxPIK-110 Carrying Case with HandleOperator's ManualOverview The PGA-710 is a unique electrostatic data analysis device for use with Prostats PFK-100 FieldmeterCharge Plate Monitor Set. It records, plots, analyzes and automatically constructs reports of body voltage generation, electrostatic decay, voltage retention, ionizer performance and other static measuring functions. Its analytical features document and automatically calculate projected levels of typical Human Body (HBM) voltages. It helps determine the risk of equaling or exceeding damaging or hazardous HBM discharge voltages in static sensitive facilities.
View Complete Details
Ask Latest Price & Details
PRS-801 Resistance System Set

PRS-801 Resistance System Set

Portable, precision resistance measurement from < 0.1 to 2.0 x E 14 ohms. With computer download capabilities.
View Complete Details
Ask Latest Price & Details
Surface Resistance Meter Set

Surface Resistance Meter Set

Portable, precision resistance measurement from < 0.1 to 1.0 x E 12ohms. Designed for the Professional Corporate ESD Auditor.
View Complete Details
Ask Latest Price & Details
Basic Audit Kit

Basic Audit Kit

  • Features PAS-853 Resistance Audit System PAS-853LR 200 cm Silicone Test Lead - Red PAS-853LB 200 cm Silicone Test Lead - Black PTB-915 Audit Test Bed PSI-870MAC Alligator Clip (2)
This digital wonder is designed specifically for the plant ESD auditor who needs to make many measurements quickly. Its design and accessories reduce inconvenient weight and time required for routine measurements. The PAS-853 instrument is a wide range ohmmeter that measures accurately from 0.01 to 1.0x1012 ohms. In AUTO mode the instrument automatically adjusts resistance range and selects test voltage in accordance with standard practices outlined in ANSIESD STM11.11, and meets audit requirements of ESD TR53: 10 Volts Variable applied from 0.01 to 9.9x103 ohms and provides audible continuity indication below 1.6 ohms 10 Volts
View Complete Details
Ask Latest Price & Details
Audit System

Audit System
This digital wonder is designed specifically for the plant ESD auditor who needs to make many measurements quickly. Its design and accessories reduce inconvenient weight and time required for routine measurements. The PAS-853 instrument is a wide range ohmmeter that measures accurately from 0.01 to 1.0x1012 ohms. In AUTO mode the instrument automatically adjusts resistance range and selects test voltage in accordance with standard practices outlined in ANSIESD STM11.11, and meets audit requirements of ESD TR53:
View Complete Details
Ask Latest Price & Details
Mold Count Plates

Mold Count Plates

  • features Increased technician labor productivity. Reduced costs.,
Yeast &Mold Count Plates are proven as reliable as Antibiotic-supplemented Potato Dextrose Agar (APDA), and antibiotic-supplemented plate count agar, 3M Petrifilm Yeast and Mold Count Plates for the foods tested. Their exclusive sample-ready design features a film coated with nutrients and gelling agents, so there's no need for the addition of antibiotics or tartaric acid.
View Complete Details
Ask Latest Price & Details
plate reader

Plate Reader

  • Features It is a compact unit that is designed to be easy to use, The 3M Petrifilm Plate Reader can easily be set up in minutes.
Plate Reader provides consistent, fast, automated reading and recording of results of 3MTM Petrifilm Plates (Aerobic Count, Coliform Count and E. coliColiform Count in 4 seconds.
View Complete Details
Ask Latest Price & Details
Aerobic Count Plates

Aerobic Count Plates
  • Benefits Reduced labor costs, Improved efficiency, Reduces incubator space and waste etc.
Aerobic Count Plates (U.S. AOAC) are sample-ready to use and help determine aerobic bacteria populations in testing processes. The indicator dye and built in grid allows for fast accurate identificaiton of colonies, within 48 hours. A survey of 274 plants who converted to 3M Petrifilm Plates from traditional agar methods found an average labor savings of 45% and an average increased technician efficiency of 80%. Our full line of easy-to-use 3M Petrifilm Plates can provide you with many benefits over traditional methods. In addition, 3M Petrifilm Aerobic Count Plates can be used to aerobically or anaerobically enumerate lactic acid bacteria in food and environmental samples.
View Complete Details
Ask Latest Price & Details
Mold Count Plates

Mold Count Plates

  • Benefits Improved efficiency., Reduced labor costs, Standardization of methodology
The 3M Petrifilm Yeast and Mold Count Plate can differentiate and enumerate yeast and mold in 3-5 days. The 3M Petrifilm Yeast & Mold Count Plate identifies food borne yeast and mold in your food products and in your food processing environment. Yeast are easily differentiated from molds on the plate. Fast, Accurate, Results in 3-5 days with three easy steps: 1) Inoculate - 3M Petrifilm Plates are easy to inoculate. Lift the top film and add sample2) Incubate - The space saving design maximizes incubator space and3) Enumerate - Yeast are typically indicated by small, blue-green colonies with defined edges and no foci. Molds are indicated by large, variably-colored colonies with diffuse edges and center foci. A built in grid facilitates counting colonies, giving you fast, precise and accurate results.
View Complete Details
Ask Latest Price & Details
Coliform Count Plates

Coliform Count Plates

In as few as 22 hours, the 3M Petrifilm Coliform Count Plate identifies coliform levels in raw materials, in-processfinished product, and plant environmentequipment. The 3M Petrifilm Coliform Count plate results in 24 hours providing an indication of sanitation or processing issues. Fast, Accurate, Results in as few as 22 hours with three easy steps: 1) Inoculate - 3M Petrifilm Plates are easy to inoculate. Lift the top film and add sample2) Incubate - The space saving design maximizes incubator space and3) Enumerate - Confirmed coliforms are red colonies which are associated with gas bubbles. This 3M Petrifilm Plate can also be read in 4 seconds using the 3M Petrifilm Plate Reader. Benefits3M Petrifilm Coliform Count Plates are sample-ready to use at any time to streamline your testing process. The indicator dye and built in grid allows fast accurate identification of colonies. No tubes or overlays are required to achieve a confirmed result. By using labor-saving 3M Petrifilm Plates, you'll have time to monitor critical control points more often.Increased technician labor productivity. Reduced costs.A survey of 274 plants who converted to 3M Petrifilm Plates from traditional agar methods found an average labor savings of 45% and an average increased technician efficiency of 80%.
View Complete Details
Ask Latest Price & Details
E.Coli Count Plates

E.Coli Count Plates
E.coli Count Plate identifies both E. coli and other coliforms with confirmed results in just 24-48 hours. The 3M Petrifilm Coliform Count plate results in 24 hours providing an indication of sanitation or processing issues. Fast, Accurate, Results in as few as 22 hours with three easy steps: 1) Inoculate - 3M Petrifilm Plates are easy to inoculate. Lift the top film and add sample2) Incubate - The space saving design maximizes incubator space and3) Enumerate - Confirmed coliforms are red colonies which are associated with gas bubbles. This 3M Petrifilm Plate can also be read in 4 seconds using the 3M Petrifilm Plate Reader. Benefits3M Petrifilm E. coliColiform Count Plates provide the most cost-effective, convenient and reliable confirmation method for testing equipment, raw materials, food products and the manufacturing environment enabling you to monitor critical control points more frequently. The plate provides both E.coli and total coliform count information. By using labor-saving 3M Petrifilm Plates, you'll have time to monitor critical control points more often.Increased technician labor productivity. Reduced costs.A survey of 274 plants who converted to 3M Petrifilm Plates from traditional agar methods found an average labor savings of 45% and an average increased technician efficiency of 80%.By using labor-saving 3M Petrifilm Plates, you'll have time to monitor your process more frequently.The end result is better process control, a higher quality product and an overall reduction in operational costs. Our full line of easy-to-use 3M Petrifilm Plates can provide you with many benefits over traditional methods:Accurate results in three easy steps: inoculate, incubate and countImproved efficiency
View Complete Details
Ask Latest Price & Details
Enterobacteriaceae Count Plates

Enterobacteriaceae Count Plates

The 3M Petrifilm Enterobacteriaceae Count Plate enumerates coliforms plus potential pathogens and identifies contamination in the environment and food samples in as few as 22 hours. The 3M Petrifilm Enterobacteriaceae Count Plates are an effective method to assess environments such as post-process food contact surfaces, and help you quickly determine potential sources of contamination. This plate enumerates all coliforms as well as potential pathogens such as Salmonella, Shigella and Yersinia. Fast, Accurate, Results in as few as 22 hours with three easy steps: 1) Inoculate - 3M Petrifilm Plates are easy to inoculate. Lift the top film and add sample 2) Incubate - The space saving design maximizes incubator space and 3) Enumerate - Distinctive colonies appear in as few as 22 hours. A built in grid makes counting colonies fast and easy. Benefits3M Petrifilm Enterobacteriaceae Count Plate enumerate all Enterobacteriaceae organisms, it provides a more inclusive picture of potential contamination. The end result is better information and better process control for a higher-quality finished product. Enterobacteriaceae are of great importance since these organisms are involved in food spoilage, indicators of fecal contamination in food products, some of which are food borne pathogens.
View Complete Details
Ask Latest Price & Details
Salmonella Visual Immunoassay

Salmonella Visual Immunoassay
  • Benefits Results within 42 hours, All reagents provided etc
Salmonella Visual Immunoassay is a rapid ELISA that screens for Salmonella spp. in food samples. Results can be obtained within 42 hours allowing orders to be filled sooner based on rapid results. All reagents needed to run the test are supplied with the kit, there is the option to use an AOAC Official Method of Analysis [OMA 998.09] approved single selective enrichment broth protocol that can provide additional shortened time-to-results benefits. The ability to use this kit manually, semi-automated gives you unique operational flexibility.
View Complete Details
Ask Latest Price & Details
Staph Express Count Plate

Staph Express Count Plate

  • Benefits Results in as few as 22 hours., Improved efficiency, Reduced labor costs etc.
The 3M Petrifilm Staph Express Count Plate provides confirmed Staphylococcus aureus results in as few as 22 hours. 3M Petrifilm Staph Express Count Plates streamline your staph testing by providing fast confirmed results in a few steps. Distinctive red-violet colonies make intepretation very easy. Fast, Accurate, Results in as few as 22 hours with three easy steps: 1) Inoculate - 3M Petrifilm Plates are easy to inoculate. Lift the top film and add sample2) Incubate - The space saving design maximizes incubator space and3) Enumerate - Distinctive red-violet colonies appear in as few as 22 hours. A built in grid makes counting colonies fast and easy. If you encounter high background flora in your staph testing, the 3M Petrifilm Staph Express Disk can be used to identify S. aureus from all suspect colonies. Improved ProductivityReduced CostsThe 3M Petrifilm Staph Express Count Plate provides equivalent performance to the U.S. F.D.A. Bacteriological Analytical Manual (BAM) three-plate Baird-Parker agar plus coagulase method. Utilizing the 3M Petrifilm Plate technology, lab technicians can complete more tests in less time when compared to conventional methods. As a result, you realize increased technician productivity and reduced labor costs. This reduction allows you to more effectively manage your labor budget and reduce your overall lab costs.
View Complete Details
Ask Latest Price & Details
Bacillus Diarrhoeal Enterotoxin

Bacillus Diarrhoeal Enterotoxin

  • Benefits Simple extraction step and easy to use protocol, Rapid test results allow earlier product release
Rapid ELISA for the screening of Bacillus Diarrhoeal enterotoxin, 48 well kit Detects pre-formed BDE in only 4 hours. Can be used manually, semi-automated for large scale testing.
View Complete Details
Ask Latest Price & Details
Staph Enterotoxins ID Test

Staph Enterotoxins ID Test
  • Benefits Targets toxins even in the absence of live organisms, Can be used manually, semi-automated for large scale testing, Allows faster product release
A rapid Enterotoxin identification Visual Immunoassay. Provides a fast and specific identification test for use following a positive result with the Staph Enterotoxins VIA. Specifically identifies Staph Enterotoxins A, B, C, D and E. Provides results in only 4 hours. Simple and easy to use, with minimal reagent preparation.
View Complete Details
Ask Latest Price & Details
Electronic Pipettors

Electronic Pipettors
  • Benefits Increased consistency of sampling and diluting for time savings and cost reductions, Improved accuracy reduces labor and improves reliability to increase plant profitability
Combine the cost efficiency and labor-saving technology of 3M Petrifilm Plates with the features of the 3M 1mL and 5mL Electronic Pipettors. These pipettors provide high accuracy and precision handling for pipetting volumes of liquids. Enhanced Productivity: The 3M Electronic Pipettor is designed to enhance productivity, reduce the labor associated with pipetting and minimize the use of dilution blanks by performing common 3M Petrifilm Plate dilutions within the tip. Using the multi-dispense feature on the 5mL pipettor, you can plate multiple 1mL plates at once, without having to draw additional liquid. All of these features not only reduce labor but increase the productivity of your lab. This means improved efficiency and overall cost reductions which ultimately impacts and improves your facilitys bottom line. BenefitsIncreased consistency of sampling and diluting for time savings and cost reductionsImproved accuracy reduces labor and improves reliability to increase plant profitability
View Complete Details
Ask Latest Price & Details
Quick Swabs system

Quick Swabs System
  • Benefits Increased accuracy, Improved consistency from tech to tech and plant to plant etc.
Accuracy and consistency are both optimized by using 3M Quick Swabs. This ready-to-use environmental swab system can be used wet or dry and quickly delivers 1mL of sample onto a 3M Petrifilm Plate. Ease of Use in 4 simple StepsFor Wet Sampling 1) Bend red snap valve to transfer all the broth into the tube. 2) Remove swab from tube and swab targeted area. Place swab back into tube and bring to the lab. 3) Shake or vortex tube vigorously for 10 seconds to release bacteria from swab. 4) Pour contents onto a 3M Petrifilm Plate. For Dry Sampling 1) Remove swab from tube and swab targeted area. Place swab back into tube and bring to the lab. 2) Bend red snap valve to transfer all the broth into the tube. 3) Shake or vortex tube vigorously for 10 seconds to release bacteria from swab. 4) Pour contents onto a Petrifilm Plate. Increased Productivity and Reduced CostsThe 3M Quick Swab uses letheen broth to neutralize sanitizers and is one of the most efficient, cost effective, and economical methods for environmental swabbing available. It can decrease your overall cost per swab test by reducing labor and materials required to prepare, gather and plate the sample. There is no need to prepare neutralizing diluent or use a pipette to add the sample to the plate or test. This means increased labor productivity and plant efficiency which ultimately impacts and improves your facilitys bottom line.
View Complete Details
Ask Latest Price & Details
Sponge-Stick

Sponge-Stick
  • Benefits Improved handling increases efficiency, Long handle reduces risk of contamination, Increased productivity
3M sampling sponges come in wet or dry formats with and without gloves to fit many applications. The 3M Sponge-Stick allows sample without directly handling the sponge. It makes it easier to reach into drains, pipes, around equipment. Biocide free cellulose sponge maintains organism viability. 3M sampling sponges come in wet or dry formats with and without gloves to fit many applications. The 3M Sponge-Stick allows sample without directly handling the sponge. It makes it easier to reach into drains, pipes, around equipment. Biocide free cellulose sponge maintains organism viability.
View Complete Details
Ask Latest Price & Details
Culture Bottle

Culture Bottle
  • Benefits Reduces preparation time, Reduces waste, Improves consistency, Improves plant efficiency
Pre-mixed enrichments in a sturdy, wide mouth jar. Screw top for ease of access with 40mm of headspace for sample preparation. Convenient alternative to mixing and sterilizing media. Lightweight bottles resist breaking while providing clarity for user. Leak resistant seal reduces shipping concerns. Easy open liner.
View Complete Details
Ask Latest Price & Details
Surface Protein Plus

Surface Protein Plus
  • Benefits Helps protect your reputation, Minimal training required, can be used by all staff etc.
Fast and easy way to check whether cleaning has been carried out to a satisfactory standard by means of protein detection. Everything you need for a result is contained in the compact device. There is no need for an instrument as results are visual and there is also no need to store the device under refrigerated conditions. With the unique swab-click-read format and simple color change technology, this 3M test is very easy to use and implement in a busy production environment. The results are semi-quantitative with four possible colors. The faster the test turns purple the higher the level of contamination on a surface. The test detects protein and other reducing agents, considered as a superior hygiene indicator to glucose as more difficult to remove from a surface.
View Complete Details
Ask Latest Price & Details
Microbial Luminescence Systems

Microbial Luminescence Systems

A rapid microbial detection system using ATP Bioluminescence in a microwell based instrument to detect the presence of microbial ATP in sterile dairy and dairy-type products. Allows rapid assessment of Ultra Heat Treated (UHT) or Extended Shelf Life (ESL) milk and sterile dairy samples that have already been incubated within their pack. This is a rapid alternative to traditional microbiological assessment of these samples. The system is specially designed to exclude the ATP from non-microbial sources and measure only microbial ATP in a light output format of RLUs (Relative Light Units). The measurement of microbial ATP represents the presence of microbial contamination in the product. BenefitsResults available approximately 48 hours sooner than traditional methodsReduces stock holding requirements and improves responsiveness to customersTime saved improves cash flowAllows quality performance to be tracked over time High levels of support and service
View Complete Details
Ask Latest Price & Details
ESD Safety Shoe

ESD Safety Shoe
Shoe base made from Static Dissipative PU material.Durable.Steel Toe CapSurface Resistance : 10 E7 to 10 E9 OhmAvailable size : 230, 240, 250, 260, 270, 280, 290, 300
View Complete Details
Ask Latest Price & Details
Cleanroom Polyester Wipes

Cleanroom Polyester Wipes
Extremely low in both particles and fibres.Strong, solvent resistant (PET).Abrasion and chemical resistant.Sealed edges prevent particle or lint generation.Pack and wash in class 10 environment.Double packaged in bags.
View Complete Details
Ask Latest Price & Details
Dupont Sontatra MicroPure Wipes

Dupont Sontatra MicroPure Wipes
DuPont MicroPure products are application-engineered to protect cleanrooms from particles and additives. When it comes to maintaining cleanroom cleanliness, wiping products created by spunlace technology are a must. Spunlacing creates a stronger, cleaner, nonwoven fabric, without the use of glues or binders that attract cleanroom contaminants. Some of the features are : Engineered for cleanroom useAbsorbent and cleanLow particle generationNo binders or chemical treatments used in manufacturing processLow extractable level and ion contentAdvanced package design eliminates the need to cut bags in the cleanroom
View Complete Details
Ask Latest Price & Details
NBR Sele Cot

NBR Sele Cot
  • Color Natural
  • Size Small, Medium, Large
Static dissipative finger cot are widely use in electronic industry to protect contamination to the product and the personnel. Suitable for use in class 100 cleanroom environment. It is use in handling thin films, optics , electronic components and precision assembly. Carboxylated butadiene acrylonite copolymer latexPowder freeAntistatic propertiesNon chlorinatedSulphur FreeColour : NaturalResistivity : < 10 E9 Ohm sq
View Complete Details
Ask Latest Price & Details
Finger Stall

Finger Stall

Overview Finger stall are made from natural rubber letex , it is power free and non sulphur. and no silicone oil. It is widely use in metal stamping industries to prevent contamination to the metal part. For hanlding sulphur sensitive component or chlorine sensitive component. Suitable for use in class 100 cleanroom environment. It is use in handling thin films, optics , electronic components and precision assembly.
View Complete Details
Ask Latest Price & Details
ESD heel grounder

ESD Heel Grounder
  • Inner layer Inner layer
  • Outer layer Conductive
  • Conductive E7 to E9 Ohm
  • Conductive strap : E4 Ohm
ESD heel strap or ESD heel grounder are made from 2 layer rubber material. There is no constraint of size, Suitable for use for visitors or production operator. It provide mobility for operator. It is use with ESD tile to dissipate the charges from the human body, prevent demage from the sensitive component.
View Complete Details
Ask Latest Price & Details
Antistatic EVA Slipper

Antistatic EVA Slipper
  • Surface Resistance < 10 E 6 Ohm
  • Body to ground resistance 2.17 E 6 Ohm/sq
  • Available size Small, Medium, Large, X-Large
ESD Slipper are made from EVA material, it is soft and comfortable, anti slip properties. Suitable for industry that involved microelectronics assembly and packing where static control is a concern. This slipper is tested is able to meet ESD standard of ANSI ESD STM 97.1 and ANSI ESD STM 97.2. Slipper is able to achieve a resistance of less than 10 E 6 Ohm.
View Complete Details
Ask Latest Price & Details
ESD Over Boot

ESD Over Boot
  • Surface Resistance 10 E8 to 10 E9 Ohm
ESD static over boott are made from PU material with direct injection moulding method. It is oil resistance and thus non slip. The steel toe cap provide protection to the personnel in his working environment. The legging are customise to suit customer requirement on specification and colour. Refer to fabric for more details. Personnel does not need to remove the normal working shoe. This overboot are wore over the normal shoe. Pro-Pack have the capability to perform shoe test on our ESD flooring. Do contact us for more information on the testing method.
View Complete Details
Ask Latest Price & Details
Safety Eye Wear -

Safety Eye Wear -
Overview Introducing the new standard in eye protection for use in a wide variety of general purpose application. V10 standard Eye Protection features distortion free lenses and offer proven impact protection and a range of styles to meet individual needs. Suitable for Outdoor use to protect the eye from strong sun ray.
View Complete Details
Ask Latest Price & Details
Shoe

Shoe
  • Size 6 -12 (UK), EU38 - 48
  • Weight 899.7 grams
  • Model SSMN5050
  • Colour Black
  • Standard EN20345, SB/SBP/S1/S1P/S2/S3
Overview This safety is great for light to medium work environments, providing comprehensive protection that exceeds basic safety requirements. An all-time design, this is one of the most popular models in the Nitti product range, which does not only work hard outdoors, but also looks good indoors. Made from black full grain leather.Padded collar with cambrelle lining.Durable PU injection outsole.Wide steel toe cap.Full length steel midsole.Infinity comfort insole
View Complete Details
Ask Latest Price & Details
Safety Body Harness

Safety Body Harness
Excellent Safety properties.Shock Absorbing properties.Surface Resistance : 10 E 6 to 10 E 8 Ohm.Suitable for use in Cleanroom Environment. ESD Safety Body Harness are made fromNylon and Conductive Carbon Yarn. It has excellent safety and shock absorbing properties. It is suitable for use is Cleanroom Environment.
View Complete Details
Ask Latest Price & Details
eye wear

Eye Wear
  • Feature 99.9% UVA / UVB protection, mpact resistant polycarbonate lens. Lightweight frames for assed comfort.
Welcome to the new look of high value safety and lightweight comfort in eye protection. V20 Comfort Eye Protection Features distortion free lenses and offers proven impact protection, added comfort and a broad range of styles. Padded temples adds comfort on the nose bridge. This is very suitable for use indoor where clear vision is needed and at the same time protect the eye.
View Complete Details
Ask Latest Price & Details
Cleanroom Spiral Notebook

Cleanroom Spiral Notebook
  • Size A4, A4, A6
  • Packing 5 books / bag, 20 bags /ctn, 5 books / bag, 20 bags /ctn, 5 books / bag, 60 bags /ctn
Clean paper made from natural pulpWith ruled lines or Checkered for easy writing50 sheets per book (inclusive of cover)Weight : 72 Gsm or 80 GsmResistivity : < 10 E11 ohm sqColour : Sky BlueSizes Available : A4 and A5
View Complete Details
Ask Latest Price & Details
Arch Files Folder

Arch Files Folder
  • Outer surface resistivity E10 ohm.
  • Inner surface resistivity E3 ohm
ESD Blue Arch FilesESD Grey Arch FilesESD Soft Document HolderClear Antistatic PVC Document HolderClear Static Dissipative Document HolderBlack Antistatic Card HolderCleanroom ESD Clip
View Complete Details
Ask Latest Price & Details
Static Shielding Tape

Static Shielding Tape
Static shielding tape are use in packing of products. It is non corrosive and durable to chemical. it is used to shield electromagnetic waves and low static charge build up. It has low charge when removed or unrolled from surface. Various sizes available upon request.
View Complete Details
Ask Latest Price & Details
Antistatic Cellulose AcetateTape

Antistatic Cellulose AcetateTape
  • Surface resisitivity : E10 ohm
Clear antistatic tape is 0.033mm thick with a surface resistivity of 10E10 ohm sq, Available in 3" core diameter, width of 12", 34", 1" and 2". It is used in sealing of semi-conductor wafer containers. Excellent release layer antistatic property.Excellent copolymer layer antistatic property.Low peeling static voltage.Excellent durability.Surface resisitivity : E10 ohm.Various sizes available.
View Complete Details
Ask Latest Price & Details
Oval Micro ESD Cutter

Oval Micro ESD Cutter
  • Overall lenght 121 mm
  • Cutting edges lenght 8 mm
  • Box width 8 mm
  • Box thickness 6.4 mm
  • Model :5130 Semi-flush, cutting capacity 0.2-1.2 mm
Overview Ideal-tek Swiss Made Cutters are tested for measuring cutting capacity, it is use in medical equipment manaufacturing, PCB assembly production for precision cutting. Features : Very Slim.Relieved to maximize accessibility.High quality ball bearing steel.63 - 65 Rockwell Hardness (HRC): Pyrometer controlled inductive hardening.2-Component ESD Ergonomic handles, soft comfortable gripping surface, hard plastic core.Dual leaf springs in blue steal. : : :
View Complete Details
Ask Latest Price & Details
Nose ESD Plier

Nose ESD Plier
  • Overall length 133 mm
  • Jaws length 20 mm
Round nose pliers have jaws formed by two long cones. A round nose pliers is generally used both to clamp and to form loops on leads or wire. The long jaws also provide increased access. High quality ball bearing steel.63 - 65 Rockwell Hardness (HRC): Pyrometer controlled inductive hardening.2-Component ESD Ergonomic handles, soft comfortable gripping surface, hard plastic core.Dual leaf springs in blue steal.Matched bearing rings in order to minimize metal-metal contact and friction.Lap joint with screw in order to achieve a high level of strength and precision. The nut is made of hardened alloy steel in order to resist high cutting load. The screw is fine-pitched for perfect joint adjustment.
View Complete Details
Ask Latest Price & Details
Vampire Vacuum Pen

Vampire Vacuum Pen
  • Features ESD Safe. General purpose component handling. Two different tips. Three different cup size.
Vampire is the new battery-free hand held vacuum pick up pen designed for the safe pick-up of SMD components during assembly, test and rework processes. With fountain-pen dimensions, Vampire grabs, lifts and places components in complete safety, aided by a powerful internal piston and a full ESD protection. A complete choice of tips designed for any size of SMD component helps the operator to have always the right tool in hand. Vacuum tweezer set including : 1 Vampire body, 1 conductive metal straight needle, 1 45 angled metal needle, 1 conductive rubber cup 4 mm, 1 conductive rubber cup 6mm, 1 conductive rubber cup 9 mm, 1 lubricant kit.
View Complete Details
Ask Latest Price & Details
Smd Rework Station

Smd Rework Station
  • Power consumption Power consumption
  • Air volume 120 L / min
  • Noise 45 dB
ESD safe design.Brushless fan with long life time, suitable for working in cleanroomLow noise airflow, even temperature is suitable for lad free soldering and desoldering.Intelligent design, rapid heating while working, cools down to 100 degree automatically.Varies type of nozzle availableEasy to replace
View Complete Details
Ask Latest Price & Details
Oriteq Preheater, Ladle Preheater

Oriteq Preheater, Ladle Preheater
  • Power 460 W
  • Temperature range 120 ℃ - 250 ℃
  • Air volume 0.18 m3 /min

We are offering a wide range of Oriteq Preheater, Ladle Preheater. Repid heating only 10s to reach 250 degree Built- in temperature sensor, stable output temperature Cool or hot air can be selected to preheat or cool chips The preheater can be used with rework stations to process BGA or other flake ICs.

View Complete Details
Ask Latest Price & Details
Soldering Station

Soldering Station
  • Air Gun Power 800 W
  • Solder 60 W
  • Temperature Range 150 ℃‐500 ℃
ESD safe design.Brushless fan with long life time, suitable for working in cleanroomLow noise airflow, even temperature is suitable for lad free soldering and desoldering.Intelligent design, rapid heating while working, cools down to 100 degree automatically.Varies type of nozzle availableEasy to replace
View Complete Details
Ask Latest Price & Details
Basic Field Kit

Basic Field Kit

Beautifully Designed The battery-operated PFM-711A Field Meter is a compact electronic "chopper" design with accuracy of 2% at ambient conditions (23C and 30% Rh). It features automatic polarity, measurement "Hold" button, low-battery indicator, high and low ranges, distance ranging lights for accurate and repeatable measurements, manual zero control and a ground snap. With two supplied analog output cables, it can be used in conjunction with an X-Y plotter, the PDT-740B Static Decay Timer or any analog data recording device. The CPM-720A Charge Plate Assembly is 3.25 inches square. It attaches to the PFM-711A field meter for ionizer balancing, per STM3.1, voltage or charge generation, charge decay and voltage suppression analysis.
View Complete Details
Ask Latest Price & Details
EM Eye HandHeld Meter

EM Eye HandHeld Meter
ESD events (Discharge) detection in HBM, MM, and CDM: Detects ESD events and locates their sources;Measures the magnitude of individual ESD events;Counts ESD events;Logs ESD events with their magnitude and timedate stamp for generating ESD environment diagrams and records;Lets you listen to ESD event "crackles" via internal speaker or optional headphones. ESD events (Discharge) detection in HBM, MM, and CDM: Detects ESD events and locates their sources;Measures the magnitude of individual ESD events;Counts ESD events;Logs ESD events with their magnitude and timedate stamp for generating ESD environment diagrams and records;Lets you listen to ESD event "crackles" via internal speaker or optional headphones. Features :ESD Event detection in Human Body Model (HBM), MachineModel (MM) and Charge Device Model (CDM).Electromagnetic field measurement.RF signal measurement.Comes in 1 KV and 20 KV model.
View Complete Details
Ask Latest Price & Details
Moulded Tote Boxes

Moulded Tote Boxes
ESD boxes offers safe and efficient storage of items in bulk or compartmentalized models with use of optional dividers. Accessories are available in any of the three different materials to meet specific needs of today's parts and handling requirements. Nat - Refers to natural polypropylene-base resin products. They are impact resistant. durable and have a high chemical resistivity. All products in this category are grey in colour. CAS- Conductive polypropylene- base material. This material contains a carbon additive to provide an electrically conductive path through the material. This material had a surface resistivity of less than 10 5 ohm sq. all products in this category are black in colour.
View Complete Details
Ask Latest Price & Details
Angle PCB Rack

Angle PCB Rack

Conductive ABS material.Size : 325 x 205 x 93 mm.Loading capacity : 31 pcsSurface resistivity : 10 E 4 ohm sq
View Complete Details
Ask Latest Price & Details
Oriteq Benchtop Ionizer

Oriteq Benchtop Ionizer
  • Features Large Area of ionizing air flow Adjustable air speed and air volume Adjustable ion balance
Oriteq Ionizer is normally placed at one end of the workbench or area to be neutralized. It may also be mounted to a wall or shelf. The Ionizer's neutralization discharge time will be best approximately 12" to 48" directly in front of the unit and will increase as the distance from the unit increases. Ionizers are useful in preventing electrostatic charge generation, ElectroStatic Discharge, ElectroStatic Attraction, as well as preventing equipment latch-up and safety related shock. Per ANSIESD S20.20 section 6.2.3.1. Protected Areas Requirement states: "Ionization or other charge mitigating techniques shall be used at the workstation to neutralize electrostatic fields on all process essential insulators if the electrostatic field is considered a threat." Air ionization can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When an electrostatic charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionized air. Note that ionization systems should not be used as a primary means of charge control on conductors or people.
View Complete Details
Ask Latest Price & Details
Powder Fixture Set

Powder Fixture Set
Oriteq Ionizer is normally placed at one end of the workbench or area to be neutralized. It may also be mounted to a wall or shelf. The Ionizer's neutralization discharge time will be best approximately 12" to 48" directly in front of the unit and will increase as the distance from the unit increases. Ionizers are useful in preventing electrostatic charge generation, ElectroStatic Discharge, ElectroStatic Attraction, as well as preventing equipment latch-up and safety related shock. Per ANSIESD S20.20 section 6.2.3.1. Protected Areas Requirement states: "Ionization or other charge mitigating techniques shall be used at the workstation to neutralize electrostatic fields on all process essential insulators if the electrostatic field is considered a threat." Air ionization can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When an electrostatic charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionized air. Note that ionization systems should not be used as a primary means of charge control on conductors or people.
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Basavaraj BN (Pro- Pack Materials Private Limited)
  • No. 855, 1st Floor, 3rd Cross, 6th Main KSRTC layout, JP Nagar, II phase, Bangalore, Karnataka - 560078
  • Share us via
    Linkedin pinterest
View Contact No.