Dwyer 1950-02-2S Explosion Proof Differential Pressure Switch

Dwyer 1950-02-2S Explosion Proof Differential Pressure Switch

Product Details:

Minimum Order Quantity3 Piece

BrandDWYER USA

Media TypeAir and Non-Combustible, Compatible Gases

Contact System TypeSingle-Pole Double-Throw (SPDT)

Electrical Connection3 Screw Types: Common, Normally Open and Normally Closed

Model Name/NumberDwyer 1950-02-2s

ColorBLACK

Weight3.25 Ib (1.5 kg) 1950-02 Model: 4.4 lb (2 kg)

Mounting TypeDiaphragm in Vertical Position

Country of OriginMade in India

Dwyer 1950-02-2S Explosion Proof Differential Pressure Switch

Dwyer Instruments 1950-02-2S

Mfr. Part #: 1950-02-2S

Description

Differential Pressure Switch, Explosion Proof, .03-10in w.c., 1950 Series

Product Attribute

Approvals-CE ; CSA ; FM ; UL

Connection Type-1NO ; 1NC

Electrical Rating-15 A @ 125, 250, 480 VAC, 60 Hz. Resistive 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz.

Enclosure Rating-Explosion proof; Class I. Groups C and D; Class II, Groups E, F and G; Class III / ATEX

For Use With-Air and Non-Combustible,Compatible Gases

IP Rating-IP54

Mounting Orientation-Vertical

NEMA Rating-NEMA 3 ; NEMA 7 ; NEMA 9

Operating Fluid-Air ; Non-Combustible Gases

Port Size-1/8" NPT

Primary Type-Pressure Switch

Series-1950 Series

Set Point-Screw type on top of housing

Switch Type-SPDT

Temperature Range--40 to 140 F (-40 to 60 C)

Weight-3.25 lb (1.5 kg)

Overview

Dwyer 1950 Series — Explosion-proof Differential Pressure Switch | Set Points from .03 to 20 in w.c., Explosion-Proof and Weatherproof:

Series 1950 Explosion-Proof Differential Pressure Switch combines the best features of the popular Dwyer Series 1900 Pressure Switch with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7 & 9), Raintight NEMA 3 (IP54). Weatherproof features include a drain plug and O-ring seal in cover. Electrical connections are easily made by removing front cover. For convenience the set point adjustment screw is located on the outside of the housing. Twelve models offer set points from .03 to 20 in w.c. (0.0075 to 5 kPa) and from .5 to 50 psi (0.035 to 3.5 bar). The unit is very light and compact — about half the weight and bulk of other explosion-proof or weather-proof switches with separate enclosures.

Features:

Explosion-Proof and Weatherproof Housing Provides Device Protection For outdoor use or harsh environment operation

External set point screw provides easy access that simplifies making adjustments without opening or disassembling enclosure

Easily Accessible Electrical Connection Simplifies the installation