Soldering and Desoldering Station

Get Latest Price

Availability250g (w/o cord, hose )
Length190mm (with PX-2RT-B, w/o cord bushing)
Ground ResistanceLess than 2Ω
Dimensions405(W) × 240(H) × 235(D)mm
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Company Information

Advance Tech Services Pvt. Ltd.

Pitampura, Delhi

View Number

Member Since 13 Years
Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Availability250g (w/o cord, hose )
Length190mm (with PX-2RT-B, w/o cord bushing)
HeaterCeramic heater
Input Voltage/Power Consumption220-240V AC / 70W
Dimensions220 x 155mm
Standard TipPX-2RT-B
Ground ResistanceLess than 2Ω
Dimensions405(W) × 240(H) × 235(D)mm
Output Voltage220-240V AC
Leak VoltageLess than 2mV
Input Voltage/Power Consumption220-240V AC / 85W
Cord Length1.2m
Standard NozzleTP-100N-S5
Cord Length1.2m
HeaterCeramaic Heater

SERVICE STATION SVS-800AS

REWORK UNIT
The temperature can be set to max 550°C.
SOLDERING UNIT
Good for a wide range of soldering work with 70W heater.
DESOLDERING UNIT
Instant desoldering with open-valve mechanism.(Please refer to the next page.)
INDIVIDUAL POWER SWITCHES
Along with the main power switch, there are switches for soldering, desoldering, and reworking.

Independent Pumps

Desoldering and reworking operate simultaneously

400% More Suction Capacity

With open-valve mechanism

Ceramic Heater with Internal Sensor

A wide range for terminals, connectors and flat ICs (soldering & desoldering)

Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

Zero Volt Switch Circuit

Reduces noise during heater ON/OFF

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)
Step 1
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.
Step 2
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

MODEL		SVS-800AS
Voltage		220-240V AC 50/60Hz
Power Consumption		670-760W
Power Cord Length		1.5m Inlet type
Temp. Setting Range	Desoldering Unit	250−450°C
	Soldering Unit	200−480°C
	Rework	150-550℃
Insulation Resistance		Over 10MΩ(500V DC)
Vacuum Pump System		Diaphragm system
Vacuum		- 0.08MPa (-600mmHg)
Air Flow		5-25L /min
Accessories		Cleaning pin TP-100CP-13 / Soldering iron stand ST-76
Total Weight		9.3kg