"c" Type Power Press Machine

Frame: The frame is of all steel construction, fabricated from rolled steel plates with suitable cross ribbings. The structure is designed for perfectly balanced distribution of stress over the cross section, eliminating deflection and vibration. This results in increased tool and machine life.Clutch: The clutches are of pin/rolling key-type and well supported with high rigidity. The clutch is made of special alloy steel, while the pin/rolling key is manufactured from W.P.S. / EN24 material and properly heat-treated to ensure trouble-free long life and continuous strokes for mass production.Crank Shaft: The crank shaft is made of special alloy steel, precisely machined to a grind finish with closed accuracy. It is fitted in bronze bushes for smooth working, longer life, and consistent performance.Adjustable Stroke: The unique feature of adjustable stroke enables the press to perform all kinds of operations by employing short strokes for blanking and forming operations.Flywheel: The properly sized flywheel is made of high-grade cast iron, designed for storing and releasing adequate energy for the pressing operation. It is also properly balanced for smooth running.Gears: Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.Ram & Bed: Ram Slides is made of high grade heavy duty cast iron & properly seasoned, aligned & fitted with Hylum Sheet on back side for friction free travel through slides, ensuring longer life of die and easy operation. Bed is made of high grade heavy duty cast iron & properly seasoned & properly aligned with ram to obtain high accuracy and precision press operation.