Application

The “CI” Calorimeter can be used to measure the heat generated from several applications. The calorific value of the following groups of materials can be measured :- Building Materials, Coal, Coke, Fuels (gasoline, kerosene, diesel and gas (turbine fuels), Hydrocarbon fuel, Food supplements, Crops, Waste and refuse combustible materials, etc., USAGE UP TO 40000 CALORIFIC VALUES.

Compliance : ASTM D240; D 4809; D5865; D1989; E711; ISO 1928; DIN 51900; BS 1016 ; IS 1350-2

Models

• 11007-00 BASIC - MICROPROCESSOR BASED WITH TEMP. LOGGING
• 11007-01 AUTOMATIC WITH SERIAL / PRINTER INTERFACE
• 11007-02 FULLY AUTOMATIC WITH TOUCH SCREEN, PC AND BALANCE INTERFACE

Calorimeter With Microprocessor Based Digital Thermometer- Cum - Firing Unit With Memorising Of Temperature ReadingAs per IP-12. For determining calorific  values of liquid & solids. Supplied with one Stainless Steel , Crucible, Jacket calorimeter vessel, Motorised Stirrer, Pressure gauge with  pipe fittings, Nichrome wire & other standard accessories. 

Features

• 0.01 c resolution bright led display
• 10 readings memorising capability
• Fully integrated unit with stirrer, nichrome check, and firing.
• Can also be used to determine sulphur by method.
• Displays both ambient and process temperature.
• Logging time interval can be set as per user requirements.
• Operation on 230v single phase,50hz.

Application

The “CI” Calorimeter can be used to measure the heat generated from several applications. The calorific value of the following groups of materials can be measured :- Building Materials, Coal, Coke, Fuels (gasoline, kerosene, diesel and gas (turbine fuels), Hydrocarbon fuel, Food supplements, Crops, Waste and refuse combustible materials, etc., USAGE UP TO 40000 CALORIFIC VALUES.

Compliance : ASTM D240; D 4809; D5865; D1989; E711; ISO 1928; DIN 51900; BS 1016 ; IS 1350-2

Models

• 11007-00 BASIC - MICROPROCESSOR BASED WITH TEMP. LOGGING
• 11007-01 AUTOMATIC WITH SERIAL / PRINTER INTERFACE
• 11007-02 FULLY AUTOMATIC WITH TOUCH SCREEN, PC AND BALANCE INTERFACE

Calorimeter With Microprocessor Based Digital Thermometer- Cum - Firing Unit With Memorising Of Temperature ReadingAs per IP-12. For determining calorific  values of liquid & solids. Supplied with one Stainless Steel , Crucible, Jacket calorimeter vessel, Motorised Stirrer, Pressure gauge with  pipe fittings, Nichrome wire & other standard accessories. 

Features

• 0.01 c resolution bright led display
• 10 readings memorising capability
• Fully integrated unit with stirrer, nichrome check, and firing.
• Can also be used to determine sulphur by method.
• Displays both ambient and process temperature.
• Logging time interval can be set as per user requirements.
• Operation on 230v single phase,50hz.