Datacom Transmission Analyzer

We are offering portable e1, datacom transmission analyzer
overview – portable e1/datacom transmission analyzer
this e1/datacom transmission analyzer is designed for performing comprehensive analysis, measurement and evaluation of telecom networks. It performs e1 frame data monitoring and analysis, dual e1 channel testing, loop delay, aps delay, pulse measurement, jitter measurement, signal level measurement. It also has many enhanced test functions such as "pcm simulator", "mux/demux", "drop & insert" and "network tools". It is widely used in r&d, production, installation, verification and maintenance of sdh, pdh, pcm, dtu and data protocol converter equipment.
key features – portable e1/datacom transmission analyzer
•easy-to-use, handheld design
•full-featured measurements to e1, datacom and unique ip ping testing from datacom
•large color touch screen with high resolution
•smart menu navigation
•extensive error and alarm generation, detection and indication
•save/recall of up to 10 user-defined configurations and 10 groups of results
•built-in li-ion rechargeable batteries and ac power supply as well
•test results can be uploaded, conserved and printed by test manager pro software
basic functions – portable e1/datacom transmission analyzer
e1 testing
•120 ω balance and 75 ω unbalance line interfaces
•hdb3 and ami line codes
•out-of-service framed and unframed testing
2 mb/s, 64 kb/s ber testing
frame data and alarm monitoring
clock slip measurement
•in-service framed and unframed testing
hi-z and through mode testing
code, fas, crc4, e-bit ber testing
frame data and timeslot activity monitoring
monitoring of octet code in any selected timeslot
built-in 64 kb/s tone channel monitoring capability
abcd code monitoring in cas signaling
ts16 monitoring in ccs signaling
•double e1 channel testing
double e1 channels rx hi-z and through mode testing
double e1 channels code, fas, crc-4, e-bit ber testing
double e1 channels fas/nfas, cas multi-frame, ccs timeslot 16 and timeslot activity monitoring
double e1 channels timeslot data monitoring
double e1 channels built-in 64 kb/s tone channel monitoring capability
double e1 channels cas and ccs signaling monitoring
•round trip delay measurement
•aps delay measurement
•pulse mask measurement
input e1 pulse shape display
pulse width measurement
pulse width and amplitude ratio measurement
up-edge and down-edge time measurement
overshoot and undershoot ratio measurement
pulse amplitude and level measurement
•pcm simulator
extensive error insertion and alarm generation
frame data control and monitoring
idle word insertion in one or more timeslots with programmable pattern
vf tone generation and measurement in one or more timeslots
listen to any voice channel in the receiver via earphone
talk to any voice channel in the transmitter via microphone
perform the tests of signal level and frequency of the vf channel simultaneously
cas and ccs signaling generation and monitoring
•frequency and offset measurements
•level measurement
•transmit clock deviation up to 999ppm
•clock source: internal, interface and external 2 m clock/signal
•testing pattern: prbs, fixed code, 16-bit user-programmable word
•error insertion: single and fixed rate
•real-time transmit circuit status indication: open/short
•manual or auto-timer measurements
•performance analysis according to g.821, g.826, and m.2100
network testing
•ip ping
•trace route
•ip config
technical specifications – portable e1/datacom transmission analyzer
e1 testing
internal clock
2048 kb/s 10 ppm
line interfaces
75 ω (unbalanced)
120 ω (balanced)
high input impedance>2 kω
line code
hdb3, ami
frame type
unframed, pcm30, pcm30crc, pcm31, pcm31crc
tx clock source
internal, interface and external 2 mhz clock or hdb3 signal
pulse mask measurement
comply with itu-t g.703 recommendations
jitter measurement
comply with itu-t g.823, o.172 recommendations
g.703 64 kb/s co testing
line rate
64 kb/s ± 100 ppm
line interface
120 ω, balanced
line code
ami
datacom testing
line interfaces
v.24, v.35, v.36, x.21, rs-449, rs-485, eia-530, eia-530a
data rate
async: 50 b/s to 57.6 kb/s
sync: 1.2 kb/s to 38.4 kb/s, nx64 kb/s (n=1 to 32)
datacom device mode
dte, dce
ethernet testing
working mode
full duplex, 10/100m compatible
error insertion
type: bit, fas, code, crc4, e-bit
mode: single, off
others
display
4.3 inch large size display with backlit color touch screen
rechargeable battery
li-ion battery, continuous working for 4 hours
recharge time
approx. 2 hours
power supply
ac adapter:
input: 100 v to 240 v ac, 50/60 hz
output: 12 v dc /1.5 a
battery: li-ion battery
test manager pro software
operating system: win98/me/2000/nt/xp
operating temperature
0 °c to 50 °c
storage temperature
-30 °c to 70 °c
humidity
5% to 95% non-condensing
dimensions
233 mm × 110 mm × 64 mm
weight
approx. 800 g.