Our Products
Streamlined standard equipment incorporated with latest technology for cutting serial sections in research work. The precise feed mechanism cuts sections from 1-50 microns in steps of one micron.
Feed Adjustments: 1-50 microns. Total feed excursion 28mm with opening of object clamps 37x27mm. Overall dimensions 16x10x9” Complete with razor-120mm with back & handle, honing stone, object holder set of three, oil can. Packed in a wooden box.
Standard double-wall construction. Outer chamber made out of mild steel finished in powder-coated paint with mat-finished colour combinations. Inner chamber made of stainless steel sheet. The door provided with a glass full view window. Interchangeable platform has been provided. Temperature range 5°C above ambient to 60° C ± 1° C is controlled by a digital controller & Air circulating fan. Variable speed control regulator controls the speed up to 200 rpm. Control panel with Digital Temp. Controller, Digital RPM Indicator, Digital Timer, Speed control & One-off switch. To work on 220V Ac 50Hz single phase. Capacity 16x250ml or 500ml conical flasks.
OPTIONAL:
Fabricated out of a thick wooden board. It is designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. The working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counterbalanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front-facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts A.C. supply.
Working chamber size:
Product Details :
OPTIONAL :
Temperature range ambient temperature to 60° C. Temperature controlled by a digital display & control for Temp. & Humidity combined. The humidity is controlled 30 to 95% with a sensitivity of ±3%. Double walled inside Stainless steel and outside Mild steel painted in epoxy powder coating. The door has glass window. To work on 220/230 volts A.C. Inside water tank is made of stainless steel.
Technical Specification
Size Inside Chamber(WxDxH) | Capacity (Approx.) |
---|---|
455 x 455 x 455 mm | 95 ltrs. |
455 x 455 x 710 mm | 147 ltrs. |
605 x 605 x 605 mm | 225 ltrs. |
605 x 605 x 910 mm | 335 ltrs. |
Most elegant and sturdy, latest in the range of Microtome. Complete with counter balancing wheel, automatic feed mechanism and feed release. Light aluminum cover hinged at back, protects the internal mechanism. Heavy casted base plate fitted with heavy rubber pads to provide better grip. Smooth operation for uniform serial sectioning adjustable from 1 to 50 microns in steps of 1 micron. Feed mechanism is independent of other movements. Supplied complete with one knife, having back and handle in wooden box, 6 block holders, honing plate with abrasive powder, one bottle of lubricating oil and Rexene cover.
Product Details :
Technical Specification
Size (Wx H xD ) | Capacity in cft. | Capacity (Approx) |
---|---|---|
570 x 875 x 550 mm | 10 cu.ft. | 280 ltrs. |
775 x 900 x 775 mm | 20 cu.ft | 560 ltrs. |
825 x 1200 x 825 mm | 30 cu.ft. | 840 ltrs. |
900 x 1720 x 800 mm | 45.8 cu.ft. | 1282 ltrs. |
1200 x 1200 x 1200 mm | 64.0 cu.ft. | 1792 ltrs. |
Standard double wall fabrication. Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel/powder coated paint with mat finished colour combinations. Double wall door with double glass window for observation in the chamber. Temperature range 5° C above ambient to 80° C ± 1° C controlled by a thermostat. The equipment is workable on 220 V Ac 50 Hz single phase.
OPTIONAL:
Technical Specification
Chamber size in mm/Inches H x D x W | No. Of Shelves | Capacity(Aprrox.) |
---|---|---|
300 x 300 x 300(12”x 12”x12”) | 2 | 28 ltrs. |
350 x 350 x 350 (14”x 14”x14”) | 2 | 45 ltrs. |
400 x 400 x 400 (16”x16”x16”) | 2 | 65 ltrs. |
450 x 450 x 450 (18”x 18”x18”) | 2 | 95 ltrs. |
600 x 450 x 450 (24”x 18”x18”) | 2 | 125 ltrs. |
600 x 600 x 600 (24”x 24”x24”) | 2 | 224 ltrs. |
900 x 600 x 450 (36”x 24”x18”) | 2 | 252 ltrs. |
900 x 600 x 600 (36”x 24”x24”) | 2 | 336 ltrs. |
900 x 900 x 900 (36”x 36”x36”) | 3 | 480 ltrs. |
Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts are duly chrome plated. Housing provided with heating mantels for surface temp. up to 300 °C. Provided with a common energy regulator to control all units, individual on-off switches & pilot lamps. To work on 220V AC
SOXHLET EXTRACTION UNIT: (Mantel type)
SOXHLET EXTRACTION UNIT: (Heater type)
SOXHLET EXTRACTION UNITS: (Hot plate type)
SOXHLET EXTRACTION UNITS: (Bath type)
OPTIONAL: Sunvic energy regulator can be provided with all above units.
Note :
Temperature range from ambient temperature to 80° C. Thermostatic control with accuracy of ± 0.5° C to 1°C. Double walled, inside stainless steel and outside mild steel painted in epoxy powder coating. Bath consists of two pilot lamps. Temperature control knob and on/off switch. To work on 220/230 volts A.C. Supplied with or without stirring arrangement, without racks and thermometer. Lid of water bath is made of stainless steel sheet.
OPTIONAL:
Technical Specification
Size inside chamber (Stainless steel) | Capacity (Approx.) |
---|---|
300 x 175 x175 mm | 12 ltrs. |
300 x 250 x175 mm | 14 ltrs. |
375 x 300 x175 mm | 18 ltrs. |
455 x 300 x175 mm | 25 ltrs. |
605 x 300 x175 mm | 32 ltrs. |
Temperature range from ambient temperature to 98° C. Thermostatic control with an accuracy of ± 1° C. Double walled, inside stainless steel and outside mild steel sheet painted in epoxy powder coating. Top of the bath and concentric rings of stainless steel. To work on 220/230 volts A.C.
OPTIONAL: Digital temp. Indicator-cum-Controller.
Technical Specification
Size inside (Stainless steel) | Capacity (Approx.) |
---|---|
300x250x100mm(6 holes of 75 mm dia. ) | 8 ltrs. |
355x405x100mm(12 holes of 75 mm dia. ) | 15 ltrs. |
Standard double wall fabrication, Inner chamber made of highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in powder-coated paint with mat finished colour combinations.
Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of 50° C to 250° C ± 2° C, controlled by capillary type thermostat. L-shaped thermometer is a built-in type. Control panel is provided with selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.
Note: BOTTOM HEATED OVEN IS AVAILABLE ON the SAME PRICE
OPTIONAL:
Technical Specification
Chamber size in mm/Inches H x D x W | No. Of Shelves | Capacity(Aprrox.) |
---|---|---|
300 x 300 x 300 (12” x 12” x 12”) | 2 | 28 ltrs. |
350 x 350 x 350 (14” x 14” x 14”) | 2 | 45 ltrs. |
400 x 400 x 400 (16” x16” x 16”) | 2 | 65 ltrs. |
450 x 450 x 450 (18” x 18” x 18”) | 2 | 95 ltrs. |
600 x 450 x 450 (24” x 18” x 18”) | 2 | 125 ltrs. |
600 x 600 x 600 (24” x 24” x 24”) | 2 | 224 ltrs. |
900 x 600 x 450 (36” x 24” x 18”) | 2 | 252 ltrs. |
900 x 600 x 600 (36” x 24” x 24”) | 2 | 336 ltrs. |
900 x 900 x 900 (36” x 36” x 36”) | 3 | 480 ltrs. |