Pouch Air Leak Tester, Color : Transparent

ASTM F2096 Internal Pressurization Bubble Leak Testing System Pressure Leak Test Sterile Barrier This is a Pressure Leak Test Sterile Barrier System Manufactured by Burhani Engineering Technology for ASTM F2096 Standards The ASTM F2096 Bubble Test is a destructive, qualitative method for detecting and locating leaks in non-porous, rigid, and flexible packages that contain headspace gaps. This method is widely used in the pharmaceutical sector and is referenced in the ISO 11607-1 international standards The Equipment Needed for Test 1.Various Packaging Systems 2.Sterile Barrier System 3. Pressure Generator with Injector Needle 4. Electronic Pressure Regulator Annex B ASTM F2096, along with ASTM D3078, serves as a standard test for the integrity of sterile barrier systems It is possible to perform leak tests on sealed packages, including those with a low volume of inner air, such as sachets and tray packages F2096 is used to inspect the air tightness of packaging and to pinpoint the location of any failures The ASTM F2096, also referred to as the Bubble Test, uses the principle of internal pressurization to detect leakage in packages. ASTM F2096 Method A and Method B Method B - Porous Packaging 1. In the pharmaceutical industry, porous papers are often used for packaging to facilitate sterilization without opening the package. According to Method B, a blocking agent similar to a foamy soap should be applied to the top of the package to make it airtight, allowing the technician to perform the test as prescribed in Method Method A Non - Porus Packaging Material Steps 1. Stick a rubber Patch on the package and inject needle in the package 2. Submerge the Package Inside the Sterile Barrier Chamber at least 25 mm below water level with the help of dipper plate 3. Use Digital Pressure Control valve to inject compressed air inside the patch stick on package 4. Modify and adjust the pressure air flow inside the package as per requirement 5. Carefully observe for any escaping bubbles indicating leak ASTM F2096 Internal Pressurization Bubble Leak Testing System Pressure Leak Test Sterile Barrier The Pressure Leak Test Sterile Barrier System, developed by Burhani Engineering Technology, is a crucial tool for ensuring the integrity of packaging used in various industries, particularly the pharmaceutical sector. This system adheres to ASTM F2096 standards, which are highly regarded in the industry for their effectiveness in detecting leaks in non-porous, rigid, and flexible packages. The ASTM F2096 Bubble Test, the core of this system, is a destructive, qualitative method that identifies and locates leaks in packages that contain headspace gaps, ensuring that products remain sterile and uncontaminated during storage and transportation. This method is particularly vital in the pharmaceutical sector, where the integrity of sterile barrier systems is paramount. The test is referenced in ISO 11607-1 international standards, underscoring its global recognition and applicability. The equipment required for this test includes various packaging systems, a sterile barrier system, a pressure generator with an injector needle, and an electronic pressure regulator. These components work together to create the conditions necessary for detecting leaks, ensuring that the packaging can withstand the rigors of its intended use ASTM F2096, along with ASTM D3078, serves as a standard for testing the integrity of sterile barrier systems. This is particularly important for sealed packages that contain a low volume of inner air, such as sachets and tray packages. These packages are commonly used in the pharmaceutical industry, where even the smallest leak can compromise the sterility of the product. The F2096 standard is used to inspect the airtightness of packaging, helping to pinpoint the location of any failures. This makes it an invaluable tool for quality control and assurance in industries where packaging integrity is critical The Bubble T