SPRING ENERINGSED SEAL

Spring Energised seals are single acting seals which are used for dynamic and static applications.They are effective in a wide range of applications. They are chosen when higher resistance to chemical media is required, if the seal is required to operate in extremes of temperature and where good extrusion and compression characteristics are needed.

1. Application specific U-shaped seal profile
2. Spring geometry suited to the particular application
3. Proven high-performance polymers

Standard products are available from 2 mm up to 2500 mm (8' 2") in diameter along with custom Manufactured intermediate sizes, inch (imperial) sizes or special geometries.

All seals have the same operating principle and differ only in their profile form and type of metallic spring used. The spring supplies the load required for sealing at low pressures. The "U" shaped jacket allows fluid pressure to energize the sealing lips, so total sealing pressure rises with increasing operating pressure Spring Force.

The different types of seal combined with the properties of  materials offer design engineers a wide range of solutions  to a large number of applications. The most important characteristics of Spring Energised Seals are listed below:
Very low coefficient of friction
Good dynamic and static sealing
Capable of sealing at high speeds up to 15 m/s (49 ft/sec)
Almost universal chemical compatibility
Operating temperature of -253 °C up to +300 °C (423 °F to 572 °F)
Very good thermal resistance
Permanent elasticity unaffected by contact with chemicals
Good ageing characteristics
Low compression set
Capable of withstanding high pressures above 200Mpa (2000 bar, 29000 psi) when using Back-up Rings
Very good dry-running properties

Spring Energised seals offer major benefits in the design of components such as hydraulic and pneumatic cylinders, in all industries.
These include:
Excellent leak tightness
High resistance to wear
No extrusion into gaps
Withstanding aggressive and abrasive process media
Very good temperature capabilities
Low friction
Compact form
Simple installation

These seals are available in a range of geometries and designs that allow the optimum profile to be selected for each application. They can be produced from a wide range of PTFE based compounds. These are specially formulated for sealing elements and offer superior characteristics specifically matched to the demands of our customers. When required, Spring Energised seals can also be manufactured in polyethylene based material. To choose the best seal for your application, you must first decide the functional parameters. It is also important to consider the quality of the mating surface, which has a significant effect on the function and service life of the sealing system.

1 - Could be provided by kilogram or meter     
2 - High abrasion resistance, wide range of application temperatures     
3 - Low friction, high efficiency 
4 - Stick-slip free starting, no sticking     
5 - Easy installation