SpecificationBattery Snap for 9V battery with two open wire in red (+) and black (-) color, Used to connect battery to the circuit or projects. Battery Snaps also enable connections to be changed quickly and easily.
specificationRJ45 connectors are used for standard networking cable. Connector are gold plated for high reliability. Suitable for making custom length standard networking cable or crass cable (for PC to PC or laptop to laptop data transfer).
specification9-Pin IDC D-Sub connector quickly and easily crimped onto standard 1.27mm flat ribbon cable.These connectors mate with any other standard DB9 connectors, which are commonly found on computers, electronic devices, and industrial equipment.
specificationGold plated female pin can be crimped on 7/36 to 7/39 SWG, 14/37 SWG and 22 to 28AWG wires and snapped into crimp connector housings to create custom cables that are compatible with standard 0.1" (2.54mm) pitch (0.64mm x 0.64mm) male headers and solderles
specificationTin plated male pin can be crimped on 7/36 to 7/39 SWG, 14/37 to 14/38 SWG and 22 to 28AWG wires and snapped into crimp connector housings to create custom cables that are compatible with standard 0.1" (2.54mm) pitch female headers and solderless breadboa
specificationThis is a simple medium quality 2 wire cable. Cable is 7" (18cm) long and is great for jumping from board to board or just about anything else. There is a 2-pin tin plated JST female connector with 0.1" spacing on both ends. Color is subject to change.
SpecificationThis is a simple medium quality 4 wire cable. Cable is 7" (18cm) long and is great for jumping from board to board or just about anything else. There is a 4-pin tin plated JST female connector with 0.1" spacing on both ends. Color is subject to change.
specificationA highly useful connecting wire. It comes with tin plated male header on both end, can be used to make quick connections between female header pins, FRC pins, breadboard, arduino board etc.
specificationA highly useful connecting wire. It comes with gold plated female terminals on both ends, can be used to make quick connections between header pins, FRC pins, berg pins, etc.
specification0.33uF 630V AC (1200V DC) ±5% Class X2 Interference Suppression Metallized Polypropylene Film Capacitors MKP Radial Box Type.Widely used for induction cooker resonance circuit, It is wound with polypropylene film dielectric, plastic case and epoxy resin
Length1 Meter (multiple quantity will get continuous one long piece)
Wire Dia.0.9mm (0.035").
specificationTinned Copper wires are desirable for soldering as they make connections and soldering an easy task given tin is a primary component in solder. Tin also helps to strengthen the copper wire underneath, making it more resilient to breakage or lost connectio
specificationPanel mount fuse holder suitable for 6 x 30mm, 6.3 x 32mm fuses - Medium quality.Finger release caps, Fits glass or ceramic fuses, Solder terminals, 250V rated voltage.
specificationArduino UNO R3 board with DIP ATmega328P.The Arduino Uno does not include Batteries, or a DC power adapter. No external programmer is required.
specificationRadcom 1N5408 General Purpose Rectifier, 3Amps. Current Capability and Low Forward Voltage Drop, Low Reverse Leakage Current, 1000Volts - RMS Reverse Voltage
specificationThis control unit allows for the creation of a variety of lighting effects; your imagination is the only limit! Designed to work with up to 5 meters of RGB LED lighting strips. Create your own custom effects with this 24-key IR remote controller specifica
specificationThis is a PCB drill bit of diameter 1 mm. Use it to drill holes in PCBs for voltage regulators, power transistors, MOSFETs, Presets, Diodes, PCB Terminal Blocks etc.
specificationHot melt EVA (ethylene-vinyl acetate) glue, Transparent, Normal strength.Glue Sticks are made from high quality raw material and can be used for various everyday gluing projects, also used in electronic boad for various applications. These glue sticks can