Purvi Products

Thaltej, Ahmedabad, Gujarat

Purvi Products, Ahmedabad offers Brush Plating machine for on-site plating work. This machine is also known as Selective Plating machine and Portable Plating Machine. You can deposit Copper, Tin, Lead, Chrome, Nickel, Silver, Gold and Rhodium metals on metal parts or on plated jobs. This can also be used to repair Electroless Nickel plated and Hard Chrome plated jobs.

Rich Gold plating machine is an unique plating machine as plating is done without dipping the job in electroplating tanks. The plating quality is better than tank plating. The usage of this novel machine is unlimited and mainly depends upon creativity and imagination skill of the user. The installation of electrical equipment in adverse environments containing corrosive gases, liquids or dust can cause severe and rapid deterioration of the equipment. For good electrical contact, silver plating is commonly used in circuit breakers, motor starters, switch gears and electrical conductors. Silver Plating on electrical contacts including bus bars and terminal ends has proved to be a very effective tool to bring down the electrical transmission losses occurring on account of joint resistance. Joint resistance is reduced by 40%. Heat generation is also reduced and possible failures due to hotspots are thus averted.

The list of clients includes

• BARC - Trombay,
• BARC - Mysore
• ISRO - Ahmedabad
• Reliance Group 6 machines
• UPL group 4 machines
• BHEL 2 machines
• Asian Power - Pune,
• L&T - Hazira
• C & S Ele. Delhi and other electrical equipment manufacturers.
• Windsor Machines Ltd

Whats more, selective plating equipment is portable, enabling the operator to meet plating and build-up requirements wherever they arise. This equipment is an important tool for cost and time saving. It minimizes dismantling, downtime, turnaround delays, and transportation charges and paper work usually associated with sending parts outside for re-plating.

Sometime, it becomes critical to quickly repair defective components, rather than replacing them or delaying repair by removing them from the machine, sending them out for repairs and waiting for their return. Taking a component out of service for an extended time is often not an option.

In addition to in-place defect repairs, there are several other applications in which selective plating provides a quick and lower-cost means of returning critical components to service.

Selective plating is a cost-effective component repair technique for number of applications. It can often be accomplished without removing parts from production machinery. Dispatch commitments of big equipments are maintained when you have your own plating system. Touch-up plating can be completed in a matter of hours.

The machine is useful for metal art work, handicrafts, statues, hobby plating on coins, car accessories, temple items, key-chains and for logo/design etching on metal parts. The machine operates on 230V.AC. The plating process is very simple and no specialize skill is required.

We do job work of Magni Fasteners coatings. This coating is used for corrosion protection and to reduce friction in fasteners. All automotive fasteners are coated with this technology.

We are well reputed Chemical Etching Machine Manufacturers which is widely used by our clients in different industries. The Chemical Etching Machine is operated on electrochemical process and is capable of etching a large variety of ferrous and non-ferrous metals. Using hand held pad you can remove metals from selective area for number of applications. The etching process does not involve any stress development, no deformation and no molecular disturbance. The process is manual but can be automated as per requirement. Features

• Simple and light weight
• Operate on 230 V AC
• Easy to operate
• High performance
• Robust construction

Applications

• Metal removal work
• Used by leather goods manufacturer for making metal punches
• Used by steel testing labs for microscopic inspection of metals

We are offering electric etching pencil. we are eminent electric etching pencil manufactures which is used for marking on mild steel and hard metals. It does not require ink and can be used just like a pencil. Through etching pencil one can write on dies, machine tools and components, jigs, fixtures, cutting tools, etc. However, it is unsuitable for un machined or rusty or scaly surfaces, metals softer than mild steel, laminate, coated surfaces and non metallic materials.this machine can be used for hardened and groung surfaces as well. features

• no size restrictions
• no vibrations
• no moving parts
• no noise
• no ink or acid
• easily portable

applications

• for dies - punches and other press tools
• machine tools and components
• cutting tools
• jigs
• fixtures
• bearings
• inspection gauges

Purvi Products is recognized as one of the successful Manufacturers and Suppliers of Metal Etching Machine. Our Electrochemical Metal Etching is a unique system for precise etching / embossing on any metal. There is no stress development, no deformation and no molecular disturbance in the etching process. Whiteline : Metal Etching Machine is the most suitable machine for fine, precise and clean metal removal work. This is electrochemical process and with hand held pad, you can remove metals from selective area for number of applications. A large variety of ferrous and non-ferrous metal can be etched confirming to your design with this equipment. To etch part number, batch number, monogram or design in moulds and metallic masters for pantograph work of any shape you require the electrochemical etching machine Whiteline. This is a basic necessity for plastic, rubber and die casting dies manufacturers. Leather goods manufacturers and rubber belt manufacturers use this machine for marking metal punches. You can use this machine for through cutting of SS foil to use it as stencil. Steel testing labs use this machine for microscopic inspection of metals. Wrist watch back cover is also etched by this process. The process is possible on metals may be hardened or soft. Whiteline is simple, portable and robust in design. The operation is very easy and no specialize skill or experience is required. The process is manual but can be automised as per requirements. The spares & consumables are readily available / Combined : Marking & Etching Machine If you have requirements of marking & etching, we make combined machine for this purpose. To help your Etching / Marking Machine Purchase decision, we will do free samples for you. Please inform us about your specific requirements, we will suggest you the most suitable product from our range. Writewell Etching pencil is a device for marking on hard metals and mild steel by instant and permanent electroetching process. It is ideal for hardened and ground surfaces. Unsuitable for unmachined or rusty or scaly surfaces, metals softer than mild steel, laminate, coated surfaces and nonmetallic materials. Not continuous rated. Specifications :

• Works on 230 V AC.
• Single Phase.
• Easily portable.

Typical Applications :

• For dies Punches and other press tools, machine tools and components, cutting tools, jigs, fixtures, bearings, collects, inspection gauges etc.
• Disassembled details to facilitate reassembly, rejected pieces for identification, etc.
• A must for engineering tool rooms and tool stores.

Etching Pencil : a small investment for service for a good many years!

Being a non-conventional plating system, the Electroless Nickel Plating, which we render, doesnt use current for deposition purposes. The Electroless Nickel Plating Service, we render, helps in getting intricate parts with deep recesses and holes, or uniformed layer thickness; resultantly minimizing excess build-up, if any, on the edges or corners, eliminating the post-plating grinding operation. The Electroless Nickel Plating Service produces an amorphous layer, having exceptional resistance against corrosion and uniform thickness of the deposited electro-nickel material. This Electroless Nickel Plating Process is best suited for taper cavities, spiders, breakers plates, plastic dies and other varied extrusion die parts.

Why Our Electroless Nickel Plating?

• Ideal for complex shapes where uniform and controllable plating thickness is not possible by conventional electroplating process
• This Electroless Nickel Plated Layer offers a surface hardness of 48 to 62 HRC with excellent bonding and the plated layer does not flake-off.
• Helps the barrels for injection molding machines by giving them non-stick property
• Easy cleaning
• Helps in re- building worn-out punches to original dimensions
• This coating is also used for costly instruments and oil field as well.

Electroless Nickel Plating Properties

• Superior corrosion protection
• Uniform and controllable layer thickness
• Non-stick property for plastic molds and extrusion dies
• Wear resistance
• Solderability
• Lubricity
• Ductility

For the purpose of marking on hard metals and Mild Steel, the Etching Pencil, which we offer, is the best. The Etching Pencil, which we provide, writes like a pencil, although ink is not needed. In order to get the perfect etching, use the Etching Pencil on a harder metal. With our Etching Pencil, easy etching is carried out on Fixtures, Jigs, Dies, Machine Tools & Components, Cutting Tools, and many more. In addition, these Etching Pencils can be used for ground and hardened surfaces. A must-have for the Tool Rooms; these Etching Pencils create instant marks on hard metals and Mild Steel by using the permanent Electro Etching Process. These Etching Pencils are not suitable for rusty, scaly or un-machined surfaces. Also, not use these Etching Pencils on metals softer than Mild Steel, Coated Surfaces, nonmetallic materials and laminates. Why Our Etching Pencil?

• No Noise
• No Ink or Acid
• No Vibrations
• No Moving Parts
• Harder the metal, better the etching
• No Size Restrictions
• Easily portable

Specifications

• Works on 230VAC
• Single phase AC mains

Typical Applications

• Dies
• Punches
• Press Tools
• Machine Tools and components
• Cutting Tools
• Jigs
• Fixtures
• Bearings
• Collects
• Inspection Gauges

Note : Disassembled details to facilitate reassembly, rejected pieces for identification, etc.

Offering exceptional hardness to the varied aluminum components, the Hard Anodising Services is appreciated for its time bound delivery and reliability. By following anodic oxidation process, a layer similar to ceramic in hardness is developed in a cool electrolyte, especially formulated for hard anodizing. This entire process enables in making the components have high resistance against corrosion and wear & tear. These Hard Anodising Services offer exception thermal and electrical insulation. Moreover, these Hard Anodising Services render high adhesion between the surface and base material. We render Hard Anodising Services to the varied engineering sectors, having varied functional requirements.

Why Our Hard Anodising Process

• This process makes the surface non sticky that helps in easy cleaning of the products.
• This hard anodizing process offers good anti-friction and gives a layer thickness of 30 to 60 microns.
• We also offer hard anodizing process that can be ground/ honed to sizes as per the clients' specifications.

Used In

• Textile machinery parts
• Pulleys
• Rollers
• Winding drums
• Bobbins
• Pneumatic cylinders
• Automotive parts
• Compressor parts
• Impellers
• Turbine parts
• Data processing machinery parts
• Aluminum piston valves
• Nozzles
• Camera parts
• Medical instruments
• Surgical instruments
• Food handling & processing machinery parts
• Pharmaceutical processing machinery parts
• Defense industries
• Household items
• Heating plates
• Pressing iron bodies

Electro-Chemical Metal Marking is a unique system for precise marking on any shape and metal. There is no stress development, no deformation and no molecular disturbance in electrochemical marking process. Refer to us for your precise, safe and economical marking requirement. 'Markwell' Metal Marking Machine is the most suitable machine for very fine, precise and clean marking on variety of products. Tools, Machinery parts, bearings, Instruments, valves body, surgical Instruments and cutlery items etc. Can be marked safely and economically with this machine. The marking is durable, black marking or white marking is possible. Stencil : The exact image of stencil is marked on the job. The precise marking is the result of precise stencil. We offer the best quality long lasting stencil conforming to customer's artwork. You can make your own stencil with special paper we offer.