Radical measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.

Radical Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a Solution becomes very convenient because of its tapered spout

These conical measures are very good for measuring small quantities of reagents. Molded in polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy.

Made of Polypropylene, this cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leak proof. Threads should be disengaged before autoclaving.

Radical Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage

Radical Separatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leak proof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the separatory funnel

This Burette has a transparent acrylic pipe and a leak proof TPX stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofluoric Acid & Ammonium Hydroxide. The pH RANGE OF 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.

Molded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of Contact. This Flask Stand can hold round bottom Flasks upto 10Ltr capacity. This Stackable Flask Stand can also be steam autoclaved.

These non-corrosive, molded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.

SOLAR SYSTEM MODEL

Three dimensional model. Students can see the planets in their relatives sizes and colours. Planet may be set by month to show their relative positions. Sturdy base supports 15 cms. dia. Sun with the outer palnet 18 inch from the Sun. Illustrated study guide includes planet position tables.

White bristle on galvanized steel wire handle.

RLE- 70 Medium High Lab Centrifuge, Maximum Speed 10000 R.P.M.

Microprocessor based square M.S Body duly powder coated with doublewalled light weight ABS lid. It is fitted with microprocessor based 2 lines16 characters LCD panel for 0-59 minutes countdown timer, digital R.P.Mmeter and programmable speed controller.

This centrifuge machine will be available with 8 x 15 ml or 4 x 50 ml(Angle Rotor Head), choose any one

Radical measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.

Test Tube Stand Wooden

Wooden, polished stand with drilled holes, 2 of 25 mm.dia. and 4 of 20 mm. to accommodate 6 tubes withoverall height of 9cms and length of 20cms. Vertical pins areprovided for quickdrying of the testtubes. Also availablefor 12 tubes, with 2holes of 25 mm. dia. and 10 holes of 20 mm. dia

MINI CENTRIFUGE MODEL RLE-10

Maximum speed 1000 R.P.M spin top with two heads 6 x 1.5 mland 12 x 0.5 ml tube. Microprocessor based digital with speedcontrol step of 1000 R.P.M, fitted with imported motorwithout carbon (Brushless

RST-142 Low Temperature Refrigerated Liquid Bath

Outer Body is made of thick mild steel duly powder coated painted and inner chamber is made up of 304 grade stainless steel/ Lid is also double walled properly insulated and is with locking facility. Whole unit is mounted on as sturdy angle iron frame. The cooling coils are brazed to the outer side of S.S chamber thus ensuring perfect and uniform cooling. Insulation is done with thick glass wool to prevent any temp. Loss. For attaining the temp. below ambient, the refrigeration is done through CFC FREE hermetically sealed compressor and for attaining the temp. above ambient, heating is done with immersion type heating element. Fitted with stirrer for temperature uniformity throughout the chamber. Temperature range is from -10 C is controlled byDual Display Microprocessor PID Digital Temperature Indicator cum controllerwith a accuracy of + 0.5o C Digital Temp. to work on 220/230 volts AC Supply. PUFF Insulation in the chamber & can be used as a circuiting water bath in external instruments.

RST-151 Vortex Shaker (Test Tube Shaker)

• Compact, rugged construction
• Heavy metal base & rubber feet prevents movement of the shaking during use.
• Choice of continuous & touch made.
• Variable speed control.
• Maximum speed 3000 rpm.
• Include one hand insert, micro tube insert & cup attachment.

A Single speed hand driven machine consisting of die casted parts and a steel pinion and worm drive. Screw clamps machine to the bench. Finished in blue color. With removable crank handle.

The unit is constructed in stainless steel construction with temperature insulation .