Our Products
D.N.A. MODEL KIT
Easy to construct the three dimensional model of DNA. Emphasizing the base pair sequence and function of DNA, the sturdy, colorful bases snap together in the correct sequence, and the pair attach to a center rod representing hydrogen bonds. Two flexible stands signifying alternating pentose and phosphate units attach to the end of each pair, forming the double helix. Once completed the, the model can be rotated on its sturdy base. Includes enough materials to construct a model. A trinted instruction manual.
Adding to the existing range of Radical jugs, these short from transparent jugs, made of polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle.
These Clamps are molded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2or3/8.
Density Hydrometer for Analytical Laboratories
Density Hydrometer for Analytical Laboratories Shot & Wax Poised, Adjusted for use at 15C M-50 SP. Calibration 0.001, Max Length 270mm, Accuracy +-0.0002 |
Nickel plated brass with screw chuck, which accepts wire on needle up to 24 SWG.
One end flat and the other end spoon form, polished.
Length 12.5 cm. 15 cms. 20 cms.
For demonstrating the principle that the pressure increases with depth. Comprising of a 60mm. metal pipe with 3 orifices of the same size at different height down one side. The cylinder is 400mm. high
The telescope is mounted on a specially designed carriage with support ring to stop abrupt falling. The carriage is fitted with two adjustable screws for precise vertical and horizontal positioning. This arrangement is mounted on a 25mm dia. 450 mm long steel pillar, fitted on a cast iron base with leveling screws. A scale holder is provided with scale.
This is a robust instrument designed specifically for student use which is capable of very high performance. The main structure is of heavy cast metal, with bright plated fittings.
Scale : The 150 mm. diameter circle with protective shield is fixed to the telescope movement and the table is attached to the double ended vernier which reads to 1 minute of arc. Both telescope and table rotation fine adjustment screws, and release of a clamping screws enables adjustment of both movements to be made by hand.
Collimator : Mounted on fixed and fitted with 178 mm. focus achromatic objectives, 25 mm. clear aperture. Also fitted is a unilaterally adjustable slit, 7 mm. long.
Telescope : Mounted on moveable pillar and fitted with 178 mm. Focus achromatic objective, 25 mm. clear aperture. Also fitted is a 8x Ramsden eyepiece and a glass crossline graticule. Both the telescope and collimator have rack and pinion focussing. Means are provided for levelling the axis of both optical units and for squaring them to axis of rotation.
Prism Table : The table is marked with lines to assist placing the prism with respect to the table levelling screws.
RSP-630Spectrometer 6" circle, 30 seconds of an arc.
RSP-701Spectrometer 7" circle, 1 minute of an arc.
RSP-730Spectrometer 7" circle, 30 seconds of an arc.
Set comprises masses of brass with slots, brass hangers with hook. Fine finish, masses removable and replaceable on hanger.
A: Set of 9 weights, one hanger each of 10 gm. Total weight 100 gm.
B: Set of 9 weights, one hanger each of 25 gm. Total weight 250gm.
C: Set of 4 weights, one hanger each of 50 gm. Total weight 250gm.
D: Set of 9 weights, one hanger each of 100gm. Total weight 1000gm.
E: Set of one hanger 20 gm. three weights 20 gm. Total weight 100gm.
F: Set of one hanger 50 gm, nine weights 20 gm. One weight 10 gm. and two weights 5 gm. Total 250 gm.
Spare slotted weights and Hangers 5gm., 10gm., 20gm., 50gm., and 100 gm. are also available.
A set of slotted iron masses suitable for use with sono-meters or other applications where a large load is required. The masses and hanger are finished in black color.
A: Hanger and Mass each of 500 gm. Total weight 2.5kg.
B: Hanger and Mass each of 1 kg. Total weight 5 kg.
Basic general purpose balance for students. The hangers have double hooks for specific gravity experiments, and pans are detachable. The balance is finished in black colour with chrome plated fittings and mounted on polished wooden base with leveling screws.
Dial type, circular scale, 6 inches with suspension and load hooks, with zero adjuster.
Horizontal reading, length one meter and width 25 mm. Double scale, one edge divided in inches and tenths and other in centimeters and millimeters also available graduated in vertical readings.
Hardwood, polished, 24 H x 15 cm. base dia. Four different sections-circle, ellipse, parabola, and hyperbola held together by a pin and easily taken apart for demonstration. Can be dissected in 5 parts.
For specific gravity determinations. Each cylinder is 5 cm. long and 13 mm. diameter. Metals included are of aluminium, steel, brass and copper. Available in set or individually.
Set of Four 13mm.
1. Aluminium
2. Copper
3. Brass
4. Steel
Consisting one block each of brass, aluminium, steel and copper. Set of Four (A) Aluminium , (B) Copper , (C) Brass, (D) Steel. The sizes of the blocks are 50x13x13 mm.
Cubes for density investigation, 20mm. Brass, Lead, Steel, Copper, Aluminium, Iron, Tin.
For demonstrating Hook's Law.
Spring Extension 15x55 mm. length.
Metal, size 115mm x90 mm (HxD) with spout for specific gravity experiments. Also available following two sizes :
100mm x 50mm 225mmx125mm
Made of aluminium, with handle. Used for collecting the liquid overflow flowing from displacement vessel.
50mm. diameter plastic pulleys are carried in tough plastic frames. Dearing pin is easily removable and has a simple locking arrangement which prevents the pin accidentally coming out. Blocks are provided with metal hooks.
Single Pulley Blocks.
Double Pulley Blocks.
Triple Pulley Blocks.
Consisting of a wooden double wheel with flat bottomed grooves, 150 and 50 mm. diameter respectively. The wheel is pivoted on a spindle 10 mm. diameter which projects for a distance of 100 mm. so that the apparatus may be clamped to a normal retort stand. The apparatus is supplied complete with two hooks and 6 meters of whipcord, but WITHOUT masses and stand.
DYNAMIC TROLLEY, WOODEN ARE ALSO AVAILABLE IN OTHER TWO MODELS AS SHOWN IN THE PICTURES (A & B) ARE GIVEN.