Post Buy Requirement
RI
Ambala, Haryana, India
Verified Add Review

Our Products

  1. Water Bottle 3 Products available
  2. Scientific Instruments 4 Products available
  3. Spectrometers 3 Products available
  4. Laboratory Apparatus 28 Products available
  5. Engine & Engine Parts 5 Products available
  6. Laboratory Equipments 12 Products available
  7. Magnifier 4 Products available
  8. Measuring Instruments & Equipment 7 Products available
  9. Microscope 16 Products available
  10. Others 145 Products available

Other Products / Services

Measuring Jug

Adding to the existing range of Radical jugs, these short from transparent jugs, made of polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle.



View Complete Details

Laboratory Hot Air Oven

Standard Double Wall Fabrication, inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick mild steel duly finished with white powder coating. The gap between the walls is fitted with special grade glass wool.Provided with two or three removable shelves.
View Complete Details

Balance Weights

Polished brass, in hardwood case with hinged lid. Divided compartment with dust cover holds nickel-silver and aluminum fractions. With chrome plated brass forceps.

View Complete Details

Hydrometers

For specific gravity, shot loaded, sub-divided in 0.002mm. Overall length approx. 250mm. Range 0.80mm to 1.00mm adjusted for low surface tension, others adjusted for medium surface tension.

View Complete Details

BERNOULLI'S TUBE

To demonstrate the Bernoulli effect produced by water flow. Comprises a Bernoulli tube, with central constriction, a constant bore gradient tube, 6 length glass tubing, 2 swan-necked outlet tubes and 8 pre-cut lengths of rubber connecting tubing. The 2 flow tubes, each 500x13mm, length 25mmx150mm spacing, extended to form 500mm manometer with the lengths of glass tubing.

View Complete Details

Manometer



For use at moderate pressures, fabricated from glass tubing 6mm bore, 8mm outside diameter. Glass manometer with built-in stopcock mounted on back plate. The apparatus is open at both ends and is supplied unfilled, 250mm long, 32mm wide (75mm wide including the side arm)




View Complete Details

Spouting Cylinder



For demonstrating the principle that the pressure increases with depth. Comprising of a 60 mm. metal pipe with 3 orifices of the same size at different heights down one side. The cylinder is 400 mm. high.




View Complete Details

Kinetic Theory Model

For simulated molecular activity in gases. To understand and study motion and behavior of molecules in gases. An electric motor, running at 4 to 12 V DC vibrates a small platform inside a transparent tube so that a set of many small stainless steel balls is vibrated violently inside the tube. An increase in the violence of vibration simulates an increase in gas temperature and an increase in the weight of the 'float' simulates an increase in gas pressure. Supplied with balls and 2 'floats'.

View Complete Details

Dip Circle

The case is made of aluminium, strongly mangetised cobalt steel needle fitted with imported hard axle rolls on knife edges agates and can be clamped when desired by a V clamp, a sensitive spirit level is provided. The tripod stand is provided with three levelling screws.

View Complete Details

Tangent Galvanometer

The plastic ring or bobbin, 162.5 mm overall diameter wound with three coils of insulated copper wire with 2, 50 and 500 turns mounted on bakelite moulded platform fitted with 4 terminals, rotating on a tripod non-magnetic metal base, supported by levelling screws. Complete with compass box (Magnetometer) mounted at the centre of the ring.

View Complete Details

Magnetometer



Comprising a stout metal box, 100mm. diameter, with aluminium dial graduated in degrees 0-90 four times, anti-parallex mirror slot.




View Complete Details

Biots Conductor

To demonstrate that charge resides only on outside surfaces of a conductor. Sphere of 5 cm. diameter on insulated stand, complete with hemispherical cups, having insulated handles.

View Complete Details

Aepinus Condenser



It consists of two adjustable plates 100mm. dia. insulated handle and a glass dielectric plate.




View Complete Details

Electroscope Pith Ball



We have mounted an insulated stand on a solid round base. Over the hook at the stands end you dangle a silk thread with a light pith ball attached to each end. Pith balls react sensitively to static charges like those from a charged friction rod. Comes with 3 strings and six 8mm. pith balls.




View Complete Details

Open Case Form Electroscope



Inexpensive Charge Detector with Scale Charge is indicated by deflection of an aluminized plastic straw which rotates freely on the saddle of the conducting rod. The conducting rod is recessed in the metal housing to shield against air currents.




View Complete Details

Braun Electroscope



This rugged, sensitive electroscope can accept various accessories to change its capacitance. A sensitive aluminium vane is balanced in a vertical position on a metal support which is insulated from its base. The vane is easily observed and projected on a chalkboard (Light Source, not included) on which an arbitrary scale has been marked. Height without attachments is about 9".




View Complete Details

PRECISION PROJECTION ELECTROSCOPE





Project your measurements onto a screen for a large group to see with this well-made electroscope. Its cylindrical metal case has two parallel plane glass windows, both removable, through which you can shine a light for projection. Close fittings and quality materials insulate the leaf system so it stays charged for several days in dry weather. The case is mounted on a heavy metal base. The Precision Projection Electroscope comes complete.




View Complete Details

PAIR OF NARROW PRISM



Designed to provide a progression of ideas from the principles of refraction in prism to the properties of lenses. Each glass prism is in the form of a narrow isoceles triangles 10x60x20mm. base, heights, thickness. When place base to base a convex lens may be simulated, and a concave lens when vertex to vertex.




View Complete Details

Lenses, Set Of Six



50 mm. diameter with ground and polished faces and ground edges. One each of double convex, plano-convex, converging concave-convex, diverging concave-convex, double concave, plano-concave. Supplied in box.




View Complete Details

STANDARD READING TELESCOPE WITH SCALE



The telescope is mounted on a specially designed carriage with support ring to stop abrupt falling. The carriage is fitted with two adjustable screws for precise vertical and horizontal positioning. This arrangement is mounted on a 25mm dia. 450 mm long steel pillar, fitted on a cast iron base with leveling screws. A scale holder is provided with scale.




View Complete Details

ROTARY MICROTOME (ERMA TYPE)



This microtome is a highly versatile sectioning device suitable for Medical Institutions, Research & Pathological Laboratories. This microtome has special application for cutting thin sections of histopathological specimens and also caters to the demands of industries such as Plastic, Leather, Textiles, Rubber & Fertilizer. The Microtome is driven by a handle which can also be locked. Cutting sections are obtained in different thickness by mechanically operated crank through a knurled knob in front of the instrument. The knurled knob is graduated in microns for feed setting and ready reference. A detent click action ensures positive adjustments in one micron increment. All parts are fabricated from selected alloys and the Microtome knife is manufactured from the fine grain steel tested to maintain optimum sharpness strength.




View Complete Details

Laminar Air Flow Horizontal





Clean Air Equipment provides dust free environment ideal for Tissue Culture, Microbiology, Biotechnology, Pathology Labs, Pharmaceutical & Electronic industry.

Technical Specifications:

  • To provide clean air to working platform horizontally.

  • Sturdy-Duraboard-construction

  • Elegant Sunmica finish

  • Silent motor & blowers

  • Vibration free unit

  • Stainless steel working platform

  • HEPA filter efficiency 99.97% down to 0.3 micron

  • Pre-filter efficiency 99% down to 5 micron

  • UV germicidal lamp 15W/30W

  • Fluorescent illumination

  • Static pressure manometer

  • Cock for gas

  • Foldable acrylic transparent door

  • Plastic grill for protection of HEPA filter

  • Removable covers to attend motor-blower-filters



Sizes:

  • 60 x 60 x 60cm

  • 90 x 60 x 60cm

  • 120 x 60 x 60cm

  • 180 x 60 x 60cm


Other models also available are given below:


  1. Laminar Air Flow Portable

  2. Laminar Air Flow Vertical

  3. Inoculation Chamber

  4. Laminar Air Flow Horizontal M.S.

  5. Laminar Air Flow Horizontal S.S.








View Complete Details

ASPIRATOR CANS, BIG, POLYTHENE

Heavy duty cans made of high density polythene. With carrying handle at the top, screw cap and side tap for outlet. Available in different capacities:


View Complete Details

BOTTLE ASPIRATOR WITH STOPCOCK

Light weight and easy to handle. These bottles are moulded in Polypropylene, which is autoclavable, dependable and have good impact strength providing extra durability to the bottle. The leak-proof spigot is screwed to the bottle body and requires only a half turn to open or close providing quick and convenient dispensing. It is acid and alkali resistant and can be used for storing and dispensing solutions, media and distilled water. Can be autoclaved, when empty, to prevent recurring bacterial growth. Available in different capacities:


View Complete Details

BEAKERS POLYPROPYLENE

Moulded in polypropylene, these superior quality beakers feature excellent clarity and very good chemical resistance, autoclavable, with permanent graduations. Tapered spout facilitates easy pouring out. Available in different sizes are given below:



  1. 25ml.

  2. 50ml.

  3. 100ml.

  4. 250ml.

  5. 500ml.

  6. 1000ml.

  7. 2000ml.

  8. 5000ml.


View Complete Details

ATOM ACTIVITY MODEL



Useful for exploring and demonstration of atomic orbital structure to a group of students. This durable, and attractive transparent model of atom has been designed to permit its use on over-head projector. Comprises a clear, thick plastic round disc with small hemisphere at the center representing nucleus and circular orbits clearly marked on the disc to represent orbits. Colorful pieces clearly depict the location of subatomic particles in the atom and their arrangement. This activity reinforces concepts of atomic numbers, atomic numbers, atomic mass, filling order os shells, electro-neutrality and ionic charge.




View Complete Details

CRYSTAL MODELS SET



Model kits for assembling various crystals lattices in skeletal form. The lattices represent certain classic structures and has been built to a large enough size so that their different faces can be seen. Each set contains different colored jacks (red, black and white) and connectors (long and short) in a prescribed number to be joined together to form crystal structures. These Complete with assembly instruction.




View Complete Details

SPRING UNIT OF MECHANICAL MODEL




For showing potential energy in a wound-up spring and its conversion to electrical energy by driving a dynamo and lighting a lamp. May also be used to wind up a weight on a cord showing the change from potential energy to kinetic and back to potential in the raised weight. The steel shaft carries a clock spring with a free wheel device and winding ratchet, also an aluminium 'V' pulley 56 mm. diameter. One end of the shaft overhangs the base for use as line shaft when winding up a weight. Dimensions 220 x 100 x 100 mm. high. Supplied complete with driving belt.






View Complete Details

TURBINE/PUMP UNIT



For use as a water turbine to drive a generator producing electricity or for use as a pump driven by a motor and raising a head of water to produce potential energy. The rotor has eight 'bucket' blades and is housed in a block turbine chamber with a clear Perspex front. Two inlet tubules (for turbine and pump operation respectively) and one outlet tubule are provided, and the shaft carries a 15 mm. diameter pulley. With driving belt.




View Complete Details

Two Stroke Petrol Engine Model





Represents internal structure and operating principles of an air-cooled two-stroke engine. All parts in aluminium alloy. Ignition is shown by means of a miniature bulb. Carburetter and fuel supply also sectioned. Mounted on metal base.




View Complete Details

Baby Weighing Balance



A single beam scale, robust steel body with epoxy powder coated parts. The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each. One hanger and one slotted mass is provided to increase the capacity of the balance. When only the hanger is suspended from the end of the beam the capacity increases to 10 kg and the reading starts from 5 kg onwards on the scale up to 10 kg. On adding the slotted mass on to the hanger the capacity increases to 15 kg and the reading starts from 10 kg onwards on the scale up to 15 kg. The tray is detachable and can be easily replaced in position by sliding on to fixed plate. Second scale is provided which reads 0 to 1 kg in division of 10 gms. Making the total capacity of balance 16 kg in to 10 gms.




View Complete Details

Double Hook Balance



Basic general purpose balance for students. The hangers have double hooks for specific gravity experiments, and pans are detachable. The balance is finished in black colour with chrome plated fittings and mounted on polished wooden base with leveling screws.




View Complete Details

Weighing Balance Lever

  • Size Standard
  • Material Metal
  • Certification ISI Certified
  • Color Grey
  • Finishing Polished
  • Feature Easy To Fit, Fine Finishing, Rustproof


A direct reading, single pan balance with its scale in the form of a quadrant. The arc scale is graduated in dual ranges of 0-250x 1 gm and 0-1000x5gm which can be set using the weight arm provided. Cast aluminium frame with all steel parts chrome plated. Levelling screw for zero adjustment.




View Complete Details

Spring Balance

  • Material Metal
  • Certification Isi Certified
  • Application Portable Electronic Goods
  • Display Type Indicator

Polystyrene bodies with large, easily read flat scales, zero adjustable device having anodized metal scale is provided.



Capacity


  • 100

  • 200

  • 250

  • 500

  • 1000

  • 2000




Sub-division


  • 1

  • 2

  • 2.5

  • 5

  • 10

  • 20


View Complete Details

METER SCALE, HARDWOOD



Horizontal reading, length one meter and width 25 mm. Double scale, one edge divided in inches and tenths and other in centimeters and millimeters also available graduated in vertical readings.




View Complete Details

Tape Measures





Both sides metric, or one side metric and other in feet-inches Fiber glass with PVC covering. Non-conducting, waterproof, washable, and water-resistant. Case made of zinc-coated steel sheet, covered with vinyl, & fitted with a flush winding handle. all metal fittings are chrome-plated. The Tape Measures are provided in size 5 meters, 10 meters, 15 meters, 20 meters, 25 meters, 30 meters.




View Complete Details

Vernier Calliper



Plated steel, Columbus type calliper enabling the user to read either inside, outside or depth measurements. With dual scale 0-12.5 cm. x 0.1 mm. Imperial scale graduated to 5 x 1/128 inches provided with thumb wheel for easy motion of jaws, in plastic case.




View Complete Details

MICROMETER (SCREW GAUGE)



Made of nickle plated brass, with ratchet top, accurately machined stainless steel rod, range 0-25 x 0.001 mm., supplied in plastic case.




View Complete Details

Set Of Geometrical Models



Consists of 16 pieces, contains various geometrical models and figures. Made of hard wood and supplied in wooden box.




View Complete Details

Cone, Dissectible



Hardwood, polished, 24 H x 15 cm. base dia. Four different sections-circle, ellipse, parabola, and hyperbola held together by a pin and easily taken apart for demonstration. Can be dissected in 5 parts.




View Complete Details

SPECIFIC GRAVITY SPECIMEN CYLINDERS WITH HOOKS

For specific gravity determinations. Each cylinder is 5 cm. long and 13 mm. diameter. Metals included are of aluminium, steel, brass and copper. Available in set or individually.
Set of Four 13mm.
1. Aluminium
2. Copper
3. Brass
4. Steel

View Complete Details

SPECIFIC GRAVITY BLOCKS



Consisting one block each of brass, aluminium, steel and copper. Set of Four (A) Aluminium , (B) Copper , (C) Brass, (D) Steel. The sizes of the blocks are 50x13x13 mm.




View Complete Details

Material Kit Solids



A variety of materials in the form of rectangular blocks, intended to familiarize the students with the appearance, 'feel', texture hardness and density of a range of common substances. Kit comprises two of each seventeen blocks as below. Blocks, 50x40x30mm. Softwood, hardwood, paraffin wax, aluminium, Iron, foamed polystyrene Blocks, 20x20x100mm. Perspex, glass, slate, aluminium, softwood, Marble. Blocks other sizes : Lead 50x50x20mm, Aluminium 50x50x80mm, Hardwood 50x50x200mm, Brass 20x20x50mm, Iron 40x40x20mm.




View Complete Details

LEVER SIMPLE FORM



For introducing the concept of equilibrium leading to an appreciation of the principle of the beam balance. Consisting of a polished boxwood rule .5m in length, divided in centimetres and millimetres on both edges. Drilled every 2 cm.




View Complete Details

Displacement Vessel

Metal, size 115mm x90 mm (HxD) with spout for specific gravity experiments. Also available following two sizes :


100mm x 50mm 225mmx125mm

View Complete Details

Aluminium Bucket

  • Country of Origin India
  • Type Aluminium Bucket
  • Material Aluminium
  • Shape Round
  • Thickness 10-15mm
  • Application Domestic
  • Color Grey
  • Condition New


Made of aluminium, with handle. Used for collecting the liquid overflow flowing from displacement vessel.




View Complete Details

Oil Free Vacuum Pump

  • Country of Origin India
  • Type High Vacuum Pumps
  • Material Mild Steel
  • Shape Rectangular
  • Operating Type Semi Automatic

Oil Free Vacuum Pump, Exclusive oil-less construction of piston or diaphragm does not requires lubrication, practically maintenance free, portable light weight die-cast aluminium components. Balanced eccentrics provide smooth, low vibration operation. Built in micro air filter, fitted with metal round plate.



View Complete Details

Pump Plate



Made of aluminium metal, with tube for connection to pump and stopcock for air regulation on central pillar. Mounted on heavy painted tripod base. Diameter of plate 175mm., 200mm., 250mm.




View Complete Details

BELL IN BELLJAR



For use on pump plate not less than 15 cm. dia. Electric Bell operating 4-6 volts AC/DC, suspended on rubber cord in bell jar. Fine coiled wire connections to terminals mounted in rubber bung sealing the jar. Sizes : 9x6 and 8x4




View Complete Details

CONDUCTOMETER



To demonstrate relative thermal conductivity of brass, copper, nickle, aluminium and iron. A rod of each metal is radially spaced equally on a brass hub. Each of the rod has a cavity at the outer end for holding paraffin. Using the wooden handle, hold the brass hub over a flame, the wax will melt at different times.




View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ranjeet Singh (Radical Instruments)
  • 123, Industrial Estate, Ambala Cantt, Haryana - 133006
  • Share us via
  • Call 08068051307 Ext. 228