We supply Ramming Mass in packed state as well. Before packing it is thoroughly tested for its purity. The packing is such that it becomes easy to carry ramming mass even to far away places. Our product portfolios are easily available in the following packaging counting from: Break bulk loose. 50 kg or 25 kg plastic /PP bags. Big Jumbo bags of 1.20 MT to 1.50 MT. Paper bags can also be arranged at an additional cost. For exports superior quality material which is stuffed in 20" heavy duty containers, accommodating unto 27 MT of material. In addition to this, palletisation and fumigation is also available. Packagings are subject to normal aging and products in bags should not be stored longer than 6 months. Furthermore, information concerning waste management etc., can be found in our safety data sheets. The packaging is selected keeping view the specific needs of the user as well as material. For specific requirements of various chemicals, moisture proof export packing is provided.

Our Ramming Mass is available in its premixed form as well. We mix well all the contents including the binder to form an optimum mixture. We always ensure minimum wastage while mixing. We are one of the overriding premixed ramming mass manufactures from India. We bring superior quality premixed ramming mass which is available in premixed versions also. We are a distinguished leader in promoting premixed use in big capacity induction furnaces. Our all the grades are available in premixed versions also. Premixed gives the following benefits to the user: Proper mixing of binder leading to optimum mixture. Less wastage, as mixing is done by machines. Only use imported Boric Acid is used to give best results. Consistent and longer lining and patching life. One less item in inventory. We offer all sorts of premixed ramming mass at the most affordable price.

We are specialized in the manufacturing, exporting, and supplying of Ferro Aluminium in all over the globe. The Ferro Aluminium is produced by us in compliance with the international quality standards. Specifications Ferro Aluminium- Al-30-60% Aluminium Ingot- Purity up to 99.9% Aluminium Powder- Purity up to 99.9% Aluminium Notch Bar- Purity up to 99.9%

Known as a Raw Iron, Foundry Pig Iron is actually the immediate product obtained by smelting iron ore with limestone and coke in a blast furnace. With high carbon content, the Foundry Pig Iron proves is brittle in nature. Specifications Mn 0.4 – 0.8% C: 3.8 – 4.2% P: 0.04 -- 0.08% Si 2.2 – 2.95% S: 0.02 -0.06%

We are counted amidst the prominent Wrought Pig Iron Manufacturers, Exporters, and Suppliers from India. The Wrought Pig Iron can be availed from us in small as well as bulk quantities. Details Pig Iron is typically poured directly out of the bottom of the blast furnace through a trough into a ladle car for transfer to the steel plant in liquid form, referred to as "hot metal." The hot metal is then charged into a steel-making vessel to produce steel, typically with an electric arc furnace or basic oxygen furnace, by burning off the excess carbon in a controlled fashion, and adjusting the alloy composition. Earlier processes for this included the Bessemer Process, open hearth furnace, finery forge and the puddling furnace.

Our Silica Ramming Mass are high on purity. These are resistant to abrasion and spalling. They find their vast usage in various industries. We bring superior quality silica ramming mass which is acidic in nature having the melting point 3274 F. Our acidic ramming mass is widely used in the lining of induction furnaces. Let̢۪s discuss some more points regarding the physical as well as chemical properties like: Nature : Acidic Melting : 3274 o F (1700 o C) Acidic ramming mass is used in the lining of induction furnaces. Quality of acidic ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control. Granulometric composition of commercial silica ramming mass size percentage: 4 mm to 1 mm 33 % 1 mm to 0.20 mm 30 % 0.20 mm to 0.06 mm 17 % 0.06mm & Below 20 % Our superior quality acidic ramming mass is stringently manufactured under strict supervision of qualified and experienced work force. Proper check is exercised on magnetic process to assure iron free Acidic ramming mass and to assure proper composition of granules according to furnace capacity. Furnace Specific Benefits : We are the only far-famed manufacturer to give material as per the furnace capacity and make of the user. The granulation of the mix is optimized keeping in view the furnace make and capacity, thus giving maximum and best results. Ramming mix is strictly characterized by thermal stability, corrosion resistance and wears resistance because it contains less binders, fire clay and moisture compared to plastic refractory. Recommended for lining the iron melting coreless induction furnace. Premixed with binder to customer's specifications. Maximum recommended use limit- 3274 o F (1700 o C).

We supply Ramming Mass in packed state as well. Before packing it is thoroughly tested for its purity. The packing is such that it becomes easy to carry ramming mass even to far away places. Our product portfolios are easily available in the following packaging counting from: Break bulk loose. 50 kg or 25 kg plastic /PP bags. Big Jumbo bags of 1.20 MT to 1.50 MT. Paper bags can also be arranged at an additional cost. For exports superior quality material which is stuffed in 20" heavy duty containers, accommodating unto 27 MT of material. In addition to this, palletisation and fumigation is also available. Packagings are subject to normal aging and products in bags should not be stored longer than 6 months. Furthermore, information concerning waste management etc., can be found in our safety data sheets. The packaging is selected keeping view the specific needs of the user as well as material. For specific requirements of various chemicals, moisture proof export packing is provided.

Our Ramming Mass is available in its premixed form as well. We mix well all the contents including the binder to form an optimum mixture. We always ensure minimum wastage while mixing. We are one of the overriding premixed ramming mass manufactures from India. We bring superior quality premixed ramming mass which is available in premixed versions also. We are a distinguished leader in promoting premixed use in big capacity induction furnaces. Our all the grades are available in premixed versions also. Premixed gives the following benefits to the user: Proper mixing of binder leading to optimum mixture. Less wastage, as mixing is done by machines. Only use imported Boric Acid is used to give best results. Consistent and longer lining and patching life. One less item in inventory. We offer all sorts of premixed ramming mass at the most affordable price.

We are specialized in the manufacturing, exporting, and supplying of Ferro Aluminium in all over the globe. The Ferro Aluminium is produced by us in compliance with the international quality standards. Specifications Ferro Aluminium- Al-30-60% Aluminium Ingot- Purity up to 99.9% Aluminium Powder- Purity up to 99.9% Aluminium Notch Bar- Purity up to 99.9%

Known as a Raw Iron, Foundry Pig Iron is actually the immediate product obtained by smelting iron ore with limestone and coke in a blast furnace. With high carbon content, the Foundry Pig Iron proves is brittle in nature. Specifications Mn 0.4 – 0.8% C: 3.8 – 4.2% P: 0.04 -- 0.08% Si 2.2 – 2.95% S: 0.02 -0.06%

We are counted amidst the prominent Wrought Pig Iron Manufacturers, Exporters, and Suppliers from India. The Wrought Pig Iron can be availed from us in small as well as bulk quantities. Details Pig Iron is typically poured directly out of the bottom of the blast furnace through a trough into a ladle car for transfer to the steel plant in liquid form, referred to as "hot metal." The hot metal is then charged into a steel-making vessel to produce steel, typically with an electric arc furnace or basic oxygen furnace, by burning off the excess carbon in a controlled fashion, and adjusting the alloy composition. Earlier processes for this included the Bessemer Process, open hearth furnace, finery forge and the puddling furnace.

Our Silica Ramming Mass are high on purity. These are resistant to abrasion and spalling. They find their vast usage in various industries. We bring superior quality silica ramming mass which is acidic in nature having the melting point 3274 F. Our acidic ramming mass is widely used in the lining of induction furnaces. Let̢۪s discuss some more points regarding the physical as well as chemical properties like: Nature : Acidic Melting : 3274 o F (1700 o C) Acidic ramming mass is used in the lining of induction furnaces. Quality of acidic ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control. Granulometric composition of commercial silica ramming mass size percentage: 4 mm to 1 mm 33 % 1 mm to 0.20 mm 30 % 0.20 mm to 0.06 mm 17 % 0.06mm & Below 20 % Our superior quality acidic ramming mass is stringently manufactured under strict supervision of qualified and experienced work force. Proper check is exercised on magnetic process to assure iron free Acidic ramming mass and to assure proper composition of granules according to furnace capacity. Furnace Specific Benefits : We are the only far-famed manufacturer to give material as per the furnace capacity and make of the user. The granulation of the mix is optimized keeping in view the furnace make and capacity, thus giving maximum and best results. Ramming mix is strictly characterized by thermal stability, corrosion resistance and wears resistance because it contains less binders, fire clay and moisture compared to plastic refractory. Recommended for lining the iron melting coreless induction furnace. Premixed with binder to customer's specifications. Maximum recommended use limit- 3274 o F (1700 o C).