An Infrared Heater is a body with a higher temperature which transfers energy to a body with a lower temperature through electromagnetic radiation. VKE Infrared Heater is manufactured by a firmly burnt-in heating coil to produce maximum output in form of heat energy. It can be operated in vacuum or atmosphere. It is used as a Heat Therapy Equipment, in Hot Stamping Machines, Shrink Packaging etc. There is no risk of damage as it incorporates highly heatproof resistance wire. Resistance of the heaters is made to remain consistent over any temperature range . This provides a longer service life. The radiation efficiency of this heater is also very high. Portable Infrared Heater is easy to keep, acquires less space and cut in heating bills.

We are a prominent manufacturer, supplier and exporter of highly efficient, high temperature cartridge heaters. These are manufactured using a nickel-chrome resistance wire which is swiftly wound around a Magnesium Oxide core to construct a cartridge heater. It is fitted into a stainless or Incoloy tube, placing the resistance wire close to the sheath. Inside the tube, the Magnesium Oxide core is centrally placed and the magnesium oxide powder filled on it. Nickel pins are passed through the middle of the core making touch with the resistance wire on both the sides. The external sheath gets an excellent heat transfer with the aid of a swaging operation. The heater is closed from one side with a welded metal end-disc and wire leads exit at the other side which is typically closed with a lava seal. The options of a variety of wire leads and lead protection are acquirable. Heaters Cartridge can be catered with internal thermocouples, mounting fittings and many other options.

We are engaged in manufacturing an exhaustive range of Porcelain Heaters that offer large heated area to gases, semi solids or liquids to be heated (when inserted into thermo well). Being a quality oriented firm, we have constant focus on maintaining highest industry standards in our range of Porcelain Water Heater and Porcelain Gas Heater. Known to be a well reputed manufacturer, exporter and supplier, we procure raw materials from only reliable vendors of the market. Porcelain Heaters find application in water, gas, oil, foodstuff, anodizing and plating baths, alkaline solutions, etc. Furthermore, we specialize in customizing our offered range of products as per the specific requirements of the clients.

Used in Dies, Drying, Hot Plates, Molds, Ovens etc, our Strip Heater is offered in different shapes and sizes. The material of construction for Mica Strip Heaters include mica insulation (MI), stainless steel sheath (SSS) and Nickel-chrome resistance ribbon (Ni-Cr RR). As per basic design, Ni-Cr RR is winded around MI and then encapsulated in SSS. We have provided options for notches, holes and cut-outs in our Strip Heater, which has made it a flexible product. In the plastic processing applications, our Mica Strip Heaters are widely used. Also, they can provide heat to flat as well as curved surfaces. The heaters are equipped with wire lead options, multiple threaded terminals and terminal boxes that offer higher flexibility for field wiring.

Longer heater life, high processing temperature capabilities and full flexibility for ease of installation characterize vke ceramic band heater. Ceramic heater are space heaters that generate heat by passing electricity through heating wires embedded in ceramic plates. There are implicit thermal insulation to curb heat losses and for conservation of electrical energy. It is used in blown film dies, food and candy extruders, drum heating etc. A wound nickel chrome resistance wire is strung through high temperature ceramic bricks that sit on an insulation blanket of ceramic fiber insulation. It helps reducing heat losses by around 20% from un-insulated ceramic heater. Mounted on stainless steel casing with serrated edges, it provides strength and great flexibility such that the heater can be fully opened for security of installation. Heat is transmitted through conduction and radiation in ceramic band heater. It can be customized in terms of sizes, clamping styles and multiple segment.

We are a commendable manufacturer and supplier offering wide array of flanged heater. Designed and manufactured with precision to suit the varied client requirements, our products are hugely popular in the domestic as well as international marketplace. It is due to the hard work and dedication of our team that we are able to provide world class flanged circulation heaters, flanged immersion heaters, etc. To the customers. The immersion heaters find application in oil heating, water chemical tanks, electroplating industry, chemical plants, oil filtration plants, etc. We fabricate the entire range of heaters in sync with the industrial norms and latest engineering standards.

Electric Duct Heater or Air Duct Heaters are used in various gas as well as air heating appliances. These are designed to be installed in existing ducting. Air Duct Heaters can be mounted in any direction. Electric Duct Heaters are used in air drying, dehumidification, autoclaves and lot more. The Duct heater is comprised of high quality Incoloy 800 elements mounted in a 38" thick flange using bulkhead fittings. It helps in easy replacement of the elements in the field. To keep the electrical wiring cooler, heat losses are minimized by high temperature isolation.

We are a trusted name when it comes to premium quality Industrial Glass Heater. Ever since the inception, we are engaged in manufacturing a comprehensive array of glass heaters that are widely used in varied industrial segments for heating applications. Counted among the leading manufacturers and suppliers, we promise to offer unmatched product quality at best price as well as within the committed time lines. All the products are manufactured from highest grade raw materials, under expert supervision. Further, we make sure to check the range of fabricated Industrial Glass Heater, Flexible Fibre Glass Heater, etc. on few well-defined parameters such as design, capacity, finishing, and more.

Specially designed using rust resistant steel sheath casing, VKE Band Heaters provide the best combination of high emissivity, physical strength and good thermal conductivity to heat cylindrical parts. Specially selected grade and thickness of mica sheet is used inside it to isolate the windings which is made of nickel chrome resistance ribbon wire to acquire the lowest internal element temperature possible. It results in long lasting heater life. The ribbon wire is wound evenly spaced on a preferred mica strip to provide even heat distribution and to eliminate hot spotting that can lead to unanticipated heater failure. Here, a low thermal expansion alloy sheath is used for the outer sheath covering the entire width of the Band Heater.

We design quality Flanged Immersion Heater which is used for heating gases and liquids in pressurized vessels and tanks. Flange Heater is one of the most widely used methods for heating liquids (such as water, oil, heat transfer fluid and corrosive solutions). It is integrated with flange, which is welded to tank wall in this heater. This heater is also called hairpin-bent tubular element which is brazed or welded into the flange. In case of Circulating Type Heaters, the flange is welded to a pipe. This type of Immersion Heater is acknowledged for its optimal performance in the heating of gases & liquids and generation of steam in the tanks and pressure vessels. There is a variety of sizes and electrical enclosures available for this Flange Heater.

The Cast In Heaters offered by us have an efficient liquid cooling function which is used to maintain suitable temperature of barrel, during the process of extrusion. Our Cast Steel Heater has various liquid cooling variations, terminations and styles. The Cast Iron Heater also has a stainless steel terminal box that offer a cost effective way to do away with vulnerability to live electrical terminals. To attain optimum amperage carrying capacity, positive electrical contact is required. This is ensured with 10-32 threads threaded post terminals that are safely fastened to the tubular heating element cold pin. The screw terminals are supported by ceramic insulators that are especially designed in the standard terminal.

We have achieved faith of our client in the area of manufacturing, supplying and exporting of the Mica Band Heater. This have durable life, advance processing temperature capabilities and full stretching for comfort of installation. This product is specially made-up in thermal insulation, to control the heat losses and save electrical energy. The insulation blanket which is attached with the heater cut out heat losses around 20% from un-insulated band heater. This is designed in such a manner that it remains mounted into stainless steel casing along with serrated edges. Such a design helps in providing high strength and flexibility thus making the heater easy for installation and opening it completely. Conduction and radiation are the two processes through which the Mica Band Heater transmit heat. This product is much more ideal than other such band heaters. Number of lead wire options, threaded terminal boxes and European plugs for electrical wiring are available in this heater. We also offer Band Heater in variable sizes, clamping styles and various segments on the client's demand.