Post Buy Requirement

Our Products

  1. Ores And Minerals 11 Products available
  2. Sand 3 Products available
  3. Clay

    2 Products available
  4. Detergent Raw Materials

    1 Products available
  5. Coal & Charcoal

    1 Products available
  6. Disinfectant Chemicals

    1 Products available
  7. Mica Products

    1 Products available
  8. Quartz Ore

    1 Products available
  9. Petrochemicals & Petroleum Products

    1 Products available

Our Products

Bleaching Earth Powder

1 /Metric Ton Get Latest Price
  • Form Powder
  • Activity (NaAc approach), mmol/kg ≥160
  • Specific surface are, m2/g ≥130
  • PH (50g/L Suspension) 2.2-4.8
  • Granularity(Over 0.075mm screen mesh), w% ≥90
  • Tap density, g/ml 0.55±0.10
View Complete Details

Asphalt Bitumen

100 /Quintal Get Latest Price
  • Type Asphalt Bitumen
  • Diameter 15.9mm, 9.5mm
  • Plastic Type Hard Bottles, Ldpe
  • Application Making Asphalt
  • Sprayer Type Boiler Cum
  • Pull Strength 1000 Kpa
View Complete Details

Mica Flakes

11 /Metric Ton Get Latest Price
  • K2O Content (%) 9.87
  • Form Solid, Flakes
  • Ph Value 7.8
  • Usage Used as filler in rubber plants, welding electrodes, cables & wires and in acoustical plaster.
  • Size 2 mesh to 30 mesh
  • Grades Coarse, Fine, Medium
View Complete Details

Olivine Sand

100 /Ton Get Latest Price
  • Color Yellow To Yellow-green
  • Mohs scale hardness 6.5–7
  • Crystal system Orthorhombic
  • Crystal habit Massive to granular
  • Optical properties Biaxial (+)
  • Cleavage Poor

Olivine is one of the most common minerals in the earth, and is a major rock forming mineral. Despite this, good specimens and large crystals are uncommon and sought after. Only few localities yield large examples of this mineral, although small and microscopic grains are found worldwide. Olivine is also found in meteorites, and large grains have been reported in many of them. Olivine is not scientifically classified by the IMA as an individual mineral species, but is rather recognized as a mineral group with the Forsterite and Fayalite end members. Fayalite and Forsterite create a solid solution series, and most specimens identified as Olivine fall somewhere in between this series, almost always leaning more towards Forsterite with a greater content of magnesium. Pure Forsterite is uncommon, and pure Fayalite is very rare.

View Complete Details

Silica Sand

100 /Ton Get Latest Price
  • SiO2 98.859
  • Al2O3 0.0981%
  • Fe2O3 0.010
  • TiO2 0.043
  • MgO >0.017%
  • CaO 0.057

Silica is used in various fields :

  • In the ceramic manufacturing industry
  • In the glass manufacturing industry
  • In paper mills
  • In the chemical industry
  • In solvent plants
  • In Iron and Steel cutting units
  • In power plants and in F.B.C boiler based industries

It is also used in the manufacture of refractories and in stimulating oil production.

View Complete Details

China Clay

100 /Ton Get Latest Price
  • Al2O3 Content (%) 28 TO 35%
  • K2O Content (%) 0.02
  • PH 6.5 to 7
  • Acid Soluble 2.3 – 2.5%
  • Bulk Density 0.65 – 0.69 gm/cc
  • Sio2 46 – 49 %

Applications of China Clay :

  • Paints as Extender
  • Rubber Industry
  • Paper as Filler
  • Ceramic Industry
  • Welding Rods
  • Pesticides
  • Fiber Glass as Filler
View Complete Details

Sodium Sulphate

100 /Ton Get Latest Price
  • Purity 98-99%
  • Application Labs
  • Molar Mass 142.04 g/mol
  • Chemical Formula Na2SO4
  • Form Powder
  • Soluble in Water

Uses of Sodium Sulphate :

  • In Glass industry, it is used as a “fining agent”, to help remove small air bubbles from molten glass.
  • In Textile industry, it helps in “leveling”, thereby reducing negative charges on fibers so that dyes can penetrate evenly.
  • It is used for frosting windows, in carpet fresheners, starch manufacture and as an additive to cattle feed.
  • In the laboratory, anhydrous sodium sulphate is widely used as an inert drying agent for organic solutions.
  • It is used as an important ingredient for the manufacture of detergents and in the Kraft process of paper pulping.
View Complete Details

Garnet Abrasive Sand

1 /Metric Ton Get Latest Price
  • Color Red-Pink
  • Hardness 7.5-8.00(moh Scale)
  • Chloride(ppm) <15ppm
  • Bulk Density 2.40gm/cm3
  • Specific Gravity 4.1
  • Grain Shape Sharp Angular
  • Toxic Substances None
  • Conductivity <35u S/cm
  • Moisture 0.12

Selection Sheet

Mineralogy Guaranted  Typical(%)
Garnet Min.95.25 97.25  
Chemical Analysis Typical Analysis Report
Parameters Typical%    
Silica(as SiO2) 32-35 Garnet 97.15
Titanium(as TiO2) 0.4-0.8 Ilmenite 1.59
Alumina(as AI2O3) 20-22 Rutile 0.14
Magnesium Oxide(as Mg2) 6.4-8.0 Zircon 0
Calcium Oxide(as CaO) 1.0-3.0 Silimanite 0.51
Potassium (as K2O) 0.05-0.25 Quartz 0.14
Ferric Oxide(as Fe2O3) 30-32 Others 0.37

Size Analysis Report

Size(ASTM) Retention (%)
+30 1.1
+40 20.21
+50 51.55
+60 14.37
+70 6.72
+80 4.12
+100 1.41
+120 0.42
-120 0.1
View Complete Details

Attapulgite Clay (Palygorskite)

100 /Ton Get Latest Price
  • Feature Moisture Proof, Safe To Use
  • Purity 97%
  • Moisture 8-9%
  • Volatile matter @600 C 16.88
  • Loss On Ignition @950 C 20.09
  • pH Value ( 20% solution) 8.18
  • Particle Size on 45 microns 5.09
  • Oil Absorption 102

Attapulgite is a kind of crystalloid hydrous magnesium-aluminum silicate mineral, having a special laminated chain structure in which there is a crystalline lattice displacement existed. Thus it makes the crystals contain uncertain quantities of Na+, Ca+, Fe3+ and Al, and present in the shape of needles, fibers or fibrous clusters. Attapulgite has very good colloidal properties such as: specific features in dispersion, high temperature endurance, salt and alkali resistance, and also high adsorbing and de-coloring capabilities. Furthermore, Attapulgite has certain plastic and adhesive characters. Its ideal molecular formula is: Mg5Si8O20(HO)2(OH2)4•4H2O.

Additional Information:

Payment Terms : L/C, T/T

Chemical Parameter

Loss on Ignition   15-16 
SiO2  39 – 40 
Al2O3  4-6
 Fe2o3  3-4
CaO  7-8
 MgO  12-14
Na2O  0.25-0.50
K2O  0.15-0.25

API 12 ATTAPULGITE


Download Detail File : Click Here

API 13A SECTION Attapulgite


Download Detail File : Click Here

ATTAPULGITE PHARMA GRADE


Download Detail File : Click Here
View Complete Details

Black Coal Lumps

100 /Ton Get Latest Price
  • Ash Content 20-25%
  • Coal Calorific 5300-5100
  • Molar mass 177.242 g/mol
  • Boiling point 269.5 °C
  • Inherent Moisture 15%
  • Abrasive Resistance 8%

We have all types of grade of coal.

View Complete Details

Silica Quartz

1 /Metric Ton Get Latest Price
  • Sio2 99.20% by wet
  • Al2o3 0.18 % by Wet
  • Fe2O3 0.02 by wet
  • CaCO3 0.25 by wet
  • Specific Gravity 3.05 gm/cc
  • Form Stone
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us