Product / Services
Post Buy Requirement
RM
Rajshakti Machines (India) LLP
Rajkot, Gujarat, India
Verified Add Review
Call 08068051364 Ext. 491

Our Products

  1. Crusher, Shredder & Presses 22 Products available
  2. Bending Machines 3 Products available
  3. Automotive Brakes 4 Products available
  4. Hydraulic Press 7 Products available
  5. Rolling Machine 3 Products available
  6. Roll Forming & Bending Machines 8 Products available
  7. Hydraulic Machines 3 Products available
  8. Others 16 Products available

Other Products / Services #2968641

Pneumatic Press Machine

Pneumatic Press Machine
C Frame Pneumatic Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.
View Complete Details
Ask Latest Price & Details
Precision Shaft

Precision Shaft
Pneumatic Dry Clutch, PLC Control With Fault Finding System, Motorized Slide Adj., Anti-repeat Safety Device, Cross Shaft Precision Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. High Precision Transmission Gear: The high accurately machined gear system provides smooth and silent operation.
View Complete Details
Ask Latest Price & Details
Mechanical Plate Rolling Machine

Mechanical Plate Rolling Machine
Its upper roller can life and two bottom rollers can move horizontally separately or synchronously. Every bottom roller performs function of bottom roller and sider roller in turn, become two types non-symmetrical three roller rolling plate machine, which can finish pre-bend and roll of thin and thick plate at the same time. It is convenient to roll taper work piece. Note: The Machine that more than25x2500 adopts discharge by hydraulic connection plate.
View Complete Details
Ask Latest Price & Details
Hydraulic Plate Shearing Machine

Hydraulic Plate Shearing Machine
HIWIN Ball screws & Polished rod with 0.05 mm accuracy, Germany Bosch-Rexroth Hydraulic, Germany Siemens Main Motor, Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si), Back metal safe fence, Front finger Protection(Safety Light curtain). Safety relay with Monitor the pedal switch & safety protection.
View Complete Details
Ask Latest Price & Details
Hydraulic Cutting Machine

Hydraulic Cutting Machine
HIWIN Ball screws & Polished rod with 0.05 mm accuracy, Germany Bosch-Rexroth Hydraulic, Telemecanique Schneider Electrics, Cutting Line Illumination and wire for shadow line cutting, Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si), Foot switch with protection cover, Front finger Protection(Safety Light curtain), Safety relay with Monitor the pedal switch & safety protection.
View Complete Details
Ask Latest Price & Details
Hydraulic Swing Beam Shear

Hydraulic Swing Beam Shear
HIWIN Ball screws & Polished rod with 0.05 mm accuracy, Germany Bosch-Rexroth Hydraulic, Germany EMB Tubing connector, Cutting Line Illumination and wire for shadow line cutting, Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si). Foot switch with protection cover, Front finger Protection(Safety Light curtain), Safety relay with Monitor the pedal switch & safety protection.
View Complete Details
Ask Latest Price & Details
Ms and SS SHEET CUTTING MACHINE

Ms And SS SHEET CUTTING MACHINE
6.25 Lakh /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Material MS and SS
  • Phase 7.5 HP
  • Max Cutting Thickness 10 MM
  • Country of Origin Made in India
  • Features Hydraulic hold down to avoid slippage of sheets , Optimum shearing condition by variable rank angle.
  • Type of Machine Sheet Metal Cutting Machine
  • Automation Grade Fully Automatic
  • Capacity 3000 MM
View Complete Details
Ask Latest Price & Details
Mechanical Press Brake Machine

Mechanical Press Brake Machine
Frame is made of steel fabricated construction of interlock robust design. Machines are constructed with safe guard against undesired deflections and breakage. The frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table and upper beam are straight and parallel of both the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machined guide ways.
View Complete Details
Ask Latest Price & Details
Trimming Press

Trimming Press

We are listed at the apex in the list of the most preeminent Hydraulic Trimming Press Manufacturers and Suppliers in India. Various national as well as international clients are placing bulk orders for the Trimming Press due to the unmatched quality and inexplicable performance in respective application. The Trimming Press Machine is designed as per the international standards and the notable features i.e. high performance, easy operation and low maintenance cost. Additionally, the Hydraulic Trimming Press is also available as per the specifications provided by the clients.





As Per Customer Requirement
View Complete Details
Ask Latest Price & Details
sheet metal bending machine

Sheet Metal Bending Machine

max rolling thick ness (mm):12 , max. crim width (mm):200, plate yield limit (mpa):245, pre curved plate thickness (mm):10, loaded with minimum diameter (mm):700 .

View Complete Details
Ask Latest Price & Details
Cnc Shearing Machine

Cnc Shearing Machine
Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.
View Complete Details
Ask Latest Price & Details
Shearing Machine Blades

Shearing Machine Blades
HIWIN Ball screws & Polished rod with 0.05 mm accuracy, Powered back gauge, Germany EMB Tubing connector, Cutting Line Illumination and wire for shadow line cutting, Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si). Front finger Protection(Safety Light curtain).
View Complete Details
Ask Latest Price & Details
Steel rolling machine

Steel Rolling Machine
MAX ROLLING THICK NESS (MM):12, PRE CURVED PLATE THICKNESS (MM):10, THE UPPER ROLLER DIAMETER (MM) :260, SIDE OF THE DIAMETER (MM):200 , MAIN MOTOR POWER (KW) :18.5, DIMENSION LXWXH (MM):5600x2000x2070, 6300x2000x1200, 7600x2000x1800.
View Complete Details
Ask Latest Price & Details
plate roller

Plate Roller
MODEL:RP-PR4-122000, MAX ROLLING THICK NESS (MM):12, MAX. CRIM WIDTH (MM):200, PLATE YIELD LIMIT (MPA):245, ROLL SPEED (MMIN) :5.45, PRE CURVED PLATE THICKNESS (MM):10, LOADED WITH MINIMUM DIAMETER (MM) :700.
View Complete Details
Ask Latest Price & Details
Cnc Guillotine Shearing Machine

Cnc Guillotine Shearing Machine
Germany ELGO P40 Controller, 750mm powered ball screw back gauge, 130mm throat depth with side guards, Front squaring arm with scale & support arms, Front finger guards, Ball transfer table and T-slots, Front finger Protection(Safety light curtain), Back metal safe fence with CE standards, Safety Relay with Monitor the pedal.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Pravin Bhai (Rajshakti Machines (India) LLP)
  • Jay Mata Ji Building, Survey No.215, Plot No.4, B/H Darshan Park and GSPC Gas Pump, Veraval, Shapar, Rajkot, Gujarat - 360024
  • Share us via
    Linkedin pinterest
  • Call 08068051364 Ext. 491