• MOQ 1000 Kilogram
• Country of OriginIndia
• Brand NameRapid-crack
• ColorOff White
• MaterialCalcium Oxide, Sodium Oxide, Magnesium Oxide, Silicon dioxide, Aluminum oxide and Ferric Oxide
• State/FormPowder
• UsageIndustrial

Rapid-Crack (Non Explosive Demolition Powder) is the commercial products that are an alternative to explosives and gas pressure blasting products in demolition, mining and quarrying. To use no-explosive demolition agents in demolition or quarrying, holes are drilled in the base rock like they would be drilled for use with conventional explosives. A slurry mixture of the non-explosive demolition agent and water is poured into the drill holes. Over the next few hours the slurry expands, cracking the rock in a pattern somewhat like the cracking that would occur from conventional explosive. It develops enormous expansion pressure, which soon becomes so high that it forces any hard rock and reinforced concrete to separate. METHODOLOGY Drilling - Mixing - Pouring

• MOQ 2000 KG
• Country of OriginIndia
• Shelf Life1yr
• ColorGrey
• FeatureHigh Quality
• FormPOWDER
• Packaging TypeCORRUGATED BOX
• CertficationISO
• Brand NameRAPID-CRACK

Expanding Grout is a  non-explosive demolition agent  used for breaking rock and concrete. Also known as Expansive Demolition Grout, it is designed to provide job sites with non-explosive solutions for the demolition of rock and concrete in environmentally sensitive areas. Using a non-explosive product for rock and concrete breaking completely eliminates flyrock, noise, vibration from blasting, human discomfort and structural damage related to air blast overpressure. Compared with conventional concrete and rock breaking methods, Expanding Grout is safe, easy-to-use and cost-effective. It does not require heavy equipment, permits, or special certifications.

• MOQ 1000 KG
• ColorWhite
• Brand NameRAPID-CRACK
• Country of OriginINDIA

Rapid-Crack (Rock Breaking and Concrete Cutting Chemical) for concrete removal, rock breaking and stone quarrying minning. Concrete removal, rock breaking and stone quarrying, minning has never been easier with RAPID-CRACK (NON EXPLOSIVE DEMOLITION AGENT) Rapid-Crack is an expansive strength when mixed with common water. Poured into pre-drilled holes, Rapid-Crack can crack split and quietly, while providing silent cracking. It is safe, easy and cost effective.

• MOQ 2 Tons
• Brand NameRAPID-CRACK
• ColorGRAY
• Country of OriginINDIA
• TypeSCA TYPE 2

High Range Expansive Mortar (HSCA, also called Soundless Cracking Agent) is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly. This High Range soundless cracking agent for s plitting and breaking rock, concrete removal, quarrying and minning.

• MOQ 1000 Kilogram
• Country of OriginIndia
• TypeStone Cracking Powder
• ColorGrey
• FormPowder
• Brand NameRapid-crack
• UsageConstruction

Rapid-Crack (EXPANSIVE MORTAR)  is a kind of chemical product to remove concrete, break stone, granite or rock. Just drill toles on the target you want demolition, and mixing our product with water and pouring into the hole and it will crack in few hours.    Specialization :- Amazing Expansive Capability Non-Explosive & Environmentally Friendly Works Efficiently and Cost Effectively   What is Rapid-Crack / Expansive Mortar / Non Explosive Demolition? “Rapid-Crack” (Expansive Mortar) is a kind of powder with amazing 18, 000 PSI expansive strength when mixed with common water. Poured into holes, “Rapid-Crack” breaks reinforced concrete & rock safely and quietly, while providing SILENT cracking, Since “Rapid- Crack” provides controlled demolition according to drilling patterns, it is very easy to break reinforced concrete and all kinds of stone into desired sizes and shapes, without noise, vibration or dust.   Use and Filling of Rapid-Crack Mix well and pour into holes while agitating the hole to make sure no air gaps are in the hole. Example: Using a piece of rod or stick to poke holes. The cracks appear in 40-60 min. after filling, depending on the weather, rocks and concrete type. The cracks become wider within time (Maximum 48 hours expanding time).   Mixing  Rapid-Crack (Expansive Mortar) must be thoroughly mixed with clean normal water before use. The required volume is 1.5 – 1.7 litters of water into a bucket, then gradually add one 5 kg bag of Expansive Mortar. Stir until you obtain a smooth lump-free slurry.  Use only open pails or containers for mixing. Narrow necked containers must not be used.  Avoid adding extra water, as this may reduce concentration and effectiveness of the mix.    Filling  Pour the freshly mixed slurry into predrilled holes within ten minutes of mixing. Do not look directly into holes when filling. Do not look directly into filled holes for the next 2 – 6 hours.    Amount to use    Indicative usage by hole size:  Drill 30 – 38mm holes  Drill to a depth of 80 – 90% of material. Do not go all the way through.  Holes should be spaced at a distance of between 200–400mm depending on material to be cut or demolished.  30mm diameter hole = 1 kg/m  32 mm diameter hole = 1.3 kg/m  34 mm diameter hole = 1.5 kg/m  38mm diameter hole = 1.8 kg/m  Cracks should appear within 2-6 hours after filling with Rapid-Crack (Expansive Mortar) mixture. Crack times will vary depending on material to be cracked, hole design, diameter of holes and temperature.  Rapid-Crack continues to increase pressure for up to 3 days.    Important  Store in a dry location. The product will be damaged and lose efficacy if contacted by water or exposed to dampness.  If only part of a bag is used, reseal with tape to exclude moisture. 

• MOQ 1000 Kilogram
• Country of OriginIndia
• Brand NameRapid-crack
• ColorOff White
• MaterialCalcium Oxide, Sodium Oxide, Magnesium Oxide, Silicon dioxide, Aluminum oxide and Ferric Oxide
• State/FormPowder
• UsageIndustrial

Rapid-Crack (Non Explosive Demolition Powder) is the commercial products that are an alternative to explosives and gas pressure blasting products in demolition, mining and quarrying. To use no-explosive demolition agents in demolition or quarrying, holes are drilled in the base rock like they would be drilled for use with conventional explosives. A slurry mixture of the non-explosive demolition agent and water is poured into the drill holes. Over the next few hours the slurry expands, cracking the rock in a pattern somewhat like the cracking that would occur from conventional explosive. It develops enormous expansion pressure, which soon becomes so high that it forces any hard rock and reinforced concrete to separate. METHODOLOGY Drilling - Mixing - Pouring

• MOQ 2000 KG
• Country of OriginIndia
• Shelf Life1yr
• ColorGrey
• FeatureHigh Quality
• FormPOWDER
• Packaging TypeCORRUGATED BOX
• CertficationISO
• Brand NameRAPID-CRACK

Expanding Grout is a  non-explosive demolition agent  used for breaking rock and concrete. Also known as Expansive Demolition Grout, it is designed to provide job sites with non-explosive solutions for the demolition of rock and concrete in environmentally sensitive areas. Using a non-explosive product for rock and concrete breaking completely eliminates flyrock, noise, vibration from blasting, human discomfort and structural damage related to air blast overpressure. Compared with conventional concrete and rock breaking methods, Expanding Grout is safe, easy-to-use and cost-effective. It does not require heavy equipment, permits, or special certifications.

• MOQ 1000 KG
• ColorWhite
• Brand NameRAPID-CRACK
• Country of OriginINDIA

Rapid-Crack (Rock Breaking and Concrete Cutting Chemical) for concrete removal, rock breaking and stone quarrying minning. Concrete removal, rock breaking and stone quarrying, minning has never been easier with RAPID-CRACK (NON EXPLOSIVE DEMOLITION AGENT) Rapid-Crack is an expansive strength when mixed with common water. Poured into pre-drilled holes, Rapid-Crack can crack split and quietly, while providing silent cracking. It is safe, easy and cost effective.

• MOQ 2 Tons
• Brand NameRAPID-CRACK
• ColorGRAY
• Country of OriginINDIA
• TypeSCA TYPE 2

High Range Expansive Mortar (HSCA, also called Soundless Cracking Agent) is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly. This High Range soundless cracking agent for s plitting and breaking rock, concrete removal, quarrying and minning.

• MOQ 1000 Kilogram
• Country of OriginIndia
• TypeStone Cracking Powder
• ColorGrey
• FormPowder
• Brand NameRapid-crack
• UsageConstruction

Rapid-Crack (EXPANSIVE MORTAR)  is a kind of chemical product to remove concrete, break stone, granite or rock. Just drill toles on the target you want demolition, and mixing our product with water and pouring into the hole and it will crack in few hours.    Specialization :- Amazing Expansive Capability Non-Explosive & Environmentally Friendly Works Efficiently and Cost Effectively   What is Rapid-Crack / Expansive Mortar / Non Explosive Demolition? “Rapid-Crack” (Expansive Mortar) is a kind of powder with amazing 18, 000 PSI expansive strength when mixed with common water. Poured into holes, “Rapid-Crack” breaks reinforced concrete & rock safely and quietly, while providing SILENT cracking, Since “Rapid- Crack” provides controlled demolition according to drilling patterns, it is very easy to break reinforced concrete and all kinds of stone into desired sizes and shapes, without noise, vibration or dust.   Use and Filling of Rapid-Crack Mix well and pour into holes while agitating the hole to make sure no air gaps are in the hole. Example: Using a piece of rod or stick to poke holes. The cracks appear in 40-60 min. after filling, depending on the weather, rocks and concrete type. The cracks become wider within time (Maximum 48 hours expanding time).   Mixing  Rapid-Crack (Expansive Mortar) must be thoroughly mixed with clean normal water before use. The required volume is 1.5 – 1.7 litters of water into a bucket, then gradually add one 5 kg bag of Expansive Mortar. Stir until you obtain a smooth lump-free slurry.  Use only open pails or containers for mixing. Narrow necked containers must not be used.  Avoid adding extra water, as this may reduce concentration and effectiveness of the mix.    Filling  Pour the freshly mixed slurry into predrilled holes within ten minutes of mixing. Do not look directly into holes when filling. Do not look directly into filled holes for the next 2 – 6 hours.    Amount to use    Indicative usage by hole size:  Drill 30 – 38mm holes  Drill to a depth of 80 – 90% of material. Do not go all the way through.  Holes should be spaced at a distance of between 200–400mm depending on material to be cut or demolished.  30mm diameter hole = 1 kg/m  32 mm diameter hole = 1.3 kg/m  34 mm diameter hole = 1.5 kg/m  38mm diameter hole = 1.8 kg/m  Cracks should appear within 2-6 hours after filling with Rapid-Crack (Expansive Mortar) mixture. Crack times will vary depending on material to be cracked, hole design, diameter of holes and temperature.  Rapid-Crack continues to increase pressure for up to 3 days.    Important  Store in a dry location. The product will be damaged and lose efficacy if contacted by water or exposed to dampness.  If only part of a bag is used, reseal with tape to exclude moisture.