Our Products
Technical Specifications
Technical Terms | RAPID 32 | RAPID 45 | RAPID 65 | RAPID 100 | ||
---|---|---|---|---|---|---|
Max. Capacity | mm | Max. | 32 x 2.0 | 45 x 3.0 | 65 x 6.0 | 114 x 7.0 |
(Dia. X Thickness) | Min. | 6.00 | 12.00 | 20.00 | 25.00 | |
Bend Radius CLR | mm | Max | 120 | 150 | 350 | 500 |
Min. | 20.0 | 25.0 | 30.0 | 40.0 | ||
Min.Bend Radius (In terms of D) | 1.5D | 1.5D | 1.5D | 1.5D | ||
Standard Length Over Mandrel Extra Length (available on Request) | Mtrs. | 2.0 | 2.0 | 2.0 | 4.0 | |
Bend Angle Range | Degrees | 5-180 | 5-180 | 5-180 | 5-180 | |
Bending Direction | Clockwise | Clockwise | Clockwise | Clockwise | ||
Bending Speed | Degrees/Sec. | 60 | 50 | 40 | 30 | |
Indicative Production Rate | 90 Degrees Bend/Hr. | 200 | 150 | 125 | 100 | |
Bend Angle Accuracy | Degrees | ± 0.25 | ± 0.25 | ± 0.25 | ± 0.25 | |
Motor Capacity | HP | 5.0 | 7.5 | 15.0 | 20.0 | |
Weight (Approx.) | Tonnes | 1.0 | 1.4 | 2.0 | 4.0 |
Technical Specifications :
Max. Copying depth | 250 mm |
---|---|
Working Pressure | 20 to 25 Kg/cm2 |
Copying ratio | 1:1 |
Oil tank capacity | 40 L |
Motor on Hydraulic Power Pack | 1 HP, 1440 RPM, 3 Phase |
Copying System | Single axis Hydraulic Control |
Copying accuracy | 0.05 to 0.1 mm |
Hydraulic Pump capacity | 7 Lt/min |