Rathi Polyplast Pvt. Ltd.

Kaladera, Jaipur, Rajasthan

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 315mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0. APPLICATIONS Water Supply Systems In Water supply distribution systems As a replacement of G.I. Pipes in Borewell Application to submersible pumps For suction and delivery lines of jet pumps and centrifugal pumps Domestic Gas Distributions is perfectly possible

• Class 40.400
•   
• Class 20.125
• Class 10.100
• CLASS OF PIPE1
• WORKING PRESSURE (MPa)0.100
• Class 30.250

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 315mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.   APPLICATIONS       Water Supply Systems In Water supply distribution systems As a replacement of G.I. Pipes in Borewell Application to submersible pumps For suction and delivery lines of jet pumps and centrifugal pumps Domestic Gas Distributions is perfectly possible   INDUSTRIAL APPLICATIONS       Disposal of corrosive effluents chemicals and treated / untreated wastes Acids and Alkalies can be transported through these pipes For conveying edible oils, fruit pulps, juices, milk and other food products As ducts for Air Conditioning and ventilation For Transporting slurries of Iron Ore, FlyAsh etc Under Water (Submarine pipe lines) pipe lines is feasible   ENVIRONMENTAL PROTECTION       HDPE Pipes are also used for Industrial waste treatment plants and water treatment plants For disposal of sand slurry in dredging operations For drainage of sewerage   ADVANTAGES       Low Specific weight and flexibility Perfect weld ability, tough and strong Abrasion and wear resistant Good Chemical and weathering resistance Low co-efficiant of Friction   RECOMMENDATIONS         DEPTH OF THE BORE PRESSURE CLASS         Up to 55 meters 4.0 kg/cm 2         Up to 90 meters 6.0 kg/cm 2         Up to 140 meters 10.0 kg/cm 2         Up to 170 meters 12.5 kg/cm 2

  This Pipe is made of un-plastisized Poly Vinyl Chloride(uPVC). It is a versatile plastic having an excellent combination of strength, chemical inertness and fine resistance, which gives optimum performance at very low and very high temperature like less than 0 o  to 60 o C for pressure rating as per IS: 4985:2000.   BENEFITS       Corrosion resistant pressure pipe Resistant to most acids, bases, salts, aliphatic, solutions, oxidants and halogens Best in chemical processing, plating, high purity applications, potable water systems, water and wastewater treatment irrigation, agriculture and other industrial applications involving corrosive fluid transfer Plumbing and drainage systems in the dwelling houses Reliable leak proof joints   SIZE       90 mm to 315 mm ODCI, plain ended & socketed pipe for solvent cement jointing 63 mm to 315 mm ODCI, plain ended & socketed pipe for solvent cement jointing 40 mm to 180 mm ODCI, plain ended & socketed pipe for solvent cement jointing 40 mm to 315 mm ODCI, socket ended with elastomeric sealing ring    

Worldwide HDPE Sprinkler System is found to be the best method to get maximum yield at low cost. It has been observed that, a sprinkler system can irrigate 2 to 3 times more farm and in the same quantum of water. The sprinkler helps in cleaning the surface of the plants, thereby helping them in easy photosynthesis. This results in greater yield. In winter season, the sprinkler system saves the surface of the plants from accumulation of frozen water and in summers it saves evaporation of water to the tune of 40%. The sprinkler system spreads the water in the farmland uniformly and thus saves the plants from water clogging and scarcity. Maximum water reaches the roots of the plants.

•   
• Light WeightLight in weight as compared to metal pipes
• FlexibleEasy to handle
• InstallationLow installation cost
• HomogenousLeakage free joints
• Crack ResistantExcellent resistant to subsidence, traffic vibrations, point leading and marshy ground
• Fusion JointsHigh Integrity and reliability

The pipes have all the better qualities of a pipe and better substitute for costly Metallic and Non-Metallic pipes like CI, GI, AC, RCC & MS. HDPE(Rathi Brand) Pipes are generally made black in colour by addition of Carbon Black to protect from aging & degradation due to ultraviolet sunrays

We are offering best mdpe pipe supplying company.

We are dealing best Sprinkler supplying company.

olyvinyl Chloride (PVC) pipes are the replacement of cement, GI, and CI pipes, Due to light weight, it is easier to transport and has better life's-PVC Pipes are manufactured from PVC Resin - Suspension Grade, K-Value 6701 a bulk polymer suitable for pressure pipes.

One of the best upvc pipe supplying company.

We are offering best swr pipe supplying company.

We are dealing best sprinkler fitting supplying company.