Realty Automation And security Systems Pvt. Ltd.

Nanded Fata, Pune, Maharashtra

V--Cop Gold intrusion alarm panel is designed for banks, home, office security system. System can read inputs from 9 wired (microcontroller based) and 32 wireless sensors to detect an emergency condition. An LCD display situated on the front panel, which gives the visual indication of various activities carried out. It can display exact cause of alarm. It has rare ability to connect 2-wire conventional smoke or heat detectors. Any alarm or trouble conditions are reported in both audio-visual manners.Product Features:16*2 Backlight LCD DisplayTactile 18 Keys Key Pad (external keypad of 18 key supported*)Inbuilt GSM auto dialer (compatible to PSTN dialer also *)10 voice and 10 SMS reporting number support20 second pre-recorded voice message. Message playback facilityUp to 100 number of event supportUp to 100 number of event supportScheduled base arming & disarmingArming and disarming through keypad, wireless key fob, SMS and using android app.Upgraded to IP connectivity ready (optional*)

V-Cop Gold intrusion alarm forbanks, homes, offices security. This system can read inputs from 9 wired (m32 wireless sensors to detect an emergency condition. It has inbuilt PSTN auto dialer. LCD display situated on the front panel gives the visual indication of various activities carried out. It can display exact cause of alarm. It has rare ability to connect 2-wire conventional smoke or heat detectors. Any alarm or trouble conditions are reported in both audio-visual manners.Product Features:16*2 Backlight LCD DisplayTactile 18 Keys KeyPadInbuilt PSTN auto dialer10 voice reporting number support16 second pre-recorded voice message.Up to 100 number of event supportAuto arm / disarm featureScheduled base arming & disarming

V-Cop Gold Intrusion Alarm Panel is a sophisticated Banks/home/office security system. This system can read inputs from 9 wired (Microcontroller based) sensors to detect an emergency condition. It has inbuilt PSTN auto dialer inbuilt. A LCD display situated on the front panel gives the visual indication of various activities carried out. It can display exact cause of alarm. It has rare ability to connect 2-wire conventional smoke or heat detectors. Any alarm or trouble conditions are reported in both audiovisual manners.Product Features:16*2 Backlight LCD DisplayTactile 18 Keys KeyPad (external keypad of 18 key supported*)Inbuilt PSTN auto dialer. (*Add on support GSM/GPRS module and IP module support SIA DC 09 protocol)10 voice reporting number support20 second pre-recorded voice message.Up to 500 number of event support.Auto arm / disarm feature (Day/ Night mode)Scheduled base arming & disarming

V-cop (standalone) intrusion alarm home/office security system. System can read inputs from 9 wired sensors to detect an emergency condition. A display situated on the front panel gives the visual indication of various activities carried out. It can display exact cause of alarm. It has rare ability to connect 2 conventional smoke or heat detectors. Any alarm or trouble conditions are reported in both audio-visual manners.Product Features:16*2 Backlight LCD DisplayTactile 18 Keys KeyPad (external keypad of 18 key supported)Up to 100 number of event support.Provision for partial /arm. AutofeaturesTampered proof enclosure and sec.Non-volatile memory to restore multiple programming.

TSFC-12-2 is a two zone Fire Alarm Panel with cloud connectivity. This is not like a ordinary panel, it is Indias first IoT based Conventional Fire Alarm Panel. This panel is connected with Cloud through Wi-Fi (internet) and stores all fire and fault information on it. We are providing Mobile App along with our system. It is used for monitoring fire panel status on any mobile from anywhere.Product Features:Receive Fire & Fault alerts on your mobile appSaves you on battery cost (Single battery backup)Attractive Flush mount Plastic enclosure to match interiors.

Fire Suppressants (Gas or Aerosol) are expensive and customers & installers are always concerned about reliability of the releasing system. Also, they are concerned about accidental release. Vighnaharta A3S brings to you Fire Suppression Panels with unique features. It is EN compliant and possess all the features required by international users.Product Features:Extra Protection against accidental releaseClass B Initiating Device Circuits (IDC) 4 no. - For Conventional Smoke Detectors.Class B Releasing Agent Circuits (RAC) 2 no.Class B Notification Appliance Circuits (NAC) 2 no. For Hooter /Sounder etc.2 IDC can be cross zone assigned for single RAC & NAC.Fire / Fault status in unambiguous colours LED indication.Inhibit/Abort Switch & Instant Release Switch.Programmable Mode (Auto/Manual) Selection & Zone Isolation facility.RAC MonitoringOptional RS485 MODBUS RTUUp to 1000 Events Memory log supportUltra-Safe Triple Activation Logic to avoid accidental release.Programmable Relays for Fire / Supervisory / Fault indication / RAC Released.Optional: Ethernet with MODBUS on IPOptional: Repeater Panel ConnectivityOptional: RAC Release Card interface

TS12(REF)R is Refrigerant Gas Leak Detector and ideal for detecting refrigerant gas leakages from Refrigeration systems in commercial and Industrial premises, Food Storage & Processing facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities. Variant models are available for different refrigerants like R410a, R408a etc.Product Features:Dustproof & Water Splash proof IP65 EnclosureReplaceable FilterAvailable with PPM BargraphCan be interfaced with Gas Detection PanelLong Life Semiconductor Sensor

TrueSafe Addressable fire alarm panels are high performance feature rich product with a competitive price. We are offering the V.126 series as an entry level addressable panel in the Fire alarm segment.It is designed as per the EN54-2 and EN54-4 certification. There is a configuration utility using which the panel can be configured. We can edit and provide names to the detectors and devices location, we can also make separate virtual zones, except the cause and Effect facility.Product Features:Modular Construction, Serviceability.Networkable through software and in peer to peer networking.Auto Resettable Fuse.Surge Protection at input supply.Battery cut off indication.Unique protocol feature for fast alarm response.2 Inbuilt conventional circuit (IDC).Tactile Keypad for user-friendly operation.Auto learning facility.Designed as per EN-54-2 and EN-54-4

TrueSafe Addressable fire alarm panels are high performance feature rich products with a competitive price. It comes with a one- loop capacity. It is an EN54.2 & EN54.4 certified Panel. The same panels can be used in Peer-Peer networking up to 16 nodes including the Repeater Panels.Product Features:EN-54-2 and EN-54-4 Certified.Modular Construction, Serviceability.Networkable through software and in peer to peer networking.Auto Resettable Fuse.Surge Protection at input supply.Battery cut off indication.Unique protocol feature for fast alarm response.2 Inbuilt conventional circuit (IDC).Tactile Keypad for user-friendly operation.Auto learning facility.

Standby battery backup with built in charging.Fire / Fault status in unambiguous colored LED indication. Switch Mode Power Supply.Tactile Keypad for easy panel operation.System on indication.Main, Standby status indication.Low Battery visual warning with audible tone.Relay output for actuators for Fire and Fault.Lamp Test facilityZone wise Isolation facility with loop voltage cut off.Compatible to all type of Conventional Detectors.Optional Zone Wise Sounder / Zone Wise Contact.

TS12CLR-RS485 is a Commercial Gas Leak Detector with PPM display. This gas detector is suitable for gas detection in Refineries, Chemical plant, LPG station, Gas Boiler, and Spray-Paints etc. Detector application is Hotel, commercial kitchens, canteen & Pantry. where gas leakage is possible. It reads the gas concentration in air and transmits it to a detection panel over a digital bus. This detector, adopting catalytic gas sensors, has advantages of good reproducibility, good performance against changes in temperature and humidity. It has a long lifespan and can be easily operated. Two alarm levels could be set for warnings (High & Low). Relay output provided can be connected to the Gas Detection Panel. In GAS Detector RS485 and two relay outputs provided.Product Features:Dustproof & Water Splash proof IP65 EnclosureReplaceable FilterGas leakage LEL Bargraph indicationCan be interfaced with Gas Detection Panelthrough RS-485 output.Sensors life up to 4years.

AD4010-GSM Auto Dialer is an electronic device that can automatically dial telephone numbers to communicate between any two points in the telephone, mobile phone networks. Once the call has been established the GSM auto dialer will announce verbal messages to the called party and you can also re-ceive both text messages and calls.The GSM auto dialer has 4 trigger Input and If any one triggers system gener-ates separate text messages and voice message, if trigger 1 got opened or closed then its text and voice message will be sent to the stored 10 telephone number. You can also activate and deactivate the system Relay Output through Mobile.Product Features & Specifications:4 Inputs (Programmable NO or NC)4 Voice Messages (One for Each Input)4 SMS Messages (One for Each Input)10 Tel No's for Voice Message Reporting10 Separate Tel No's for SMS Reporting16Sec. Voice Message Recording Facility For Each Zone900MHz, 1800MHz, 1900MHz Band SupportSignal Strength IndicationAll Inputs & Outputs Status IndicationVoltage Input(12 / 24VDC) also available for triggering INPUTS (12VDC) USPs:CMS Connectivity through GPRS (Optional)One Appliance can Control Remotely by Using SMS.Every Input SMS Alert TEXT is Editable.

Extra Protection against accidental releaseClass B Initiating Device Circuits (IDC) 2 no. - For Conventional Smoke Detectors.Class B Releasing Agent Circuits (RAC) 1 no.Class B Notification Appliance Circuits (NAC) 1 no. For Hooter /Sounder etc.2 IDC can be cross zone assigned for single RAC & NAC.Fire / Fault status in unambiguous colours LED indication.Inhibit/Abort Switch & Instant Release Switch.Programmable Mode (Auto/Manual) Selection & Zone Isolation facility.RAC MonitoringOptional RS485 MODBUS RTUUp to 1000 Events Memory log supportUltra-Safe Triple Activation Logic to avoid accidental release.Programmable Relays for Fire / Supervisory / Fault indication / RAC Released.Optional: Ethernet with MODBUS on IPOptional: Repeater Panel ConnectivityOptional: RAC Release Card interface

The AGDS-32, Gas Detection System consists of one control panel and up to 32 Addressable gas detectors and signal output devices. This networked system creates a plant-wide, distributed safety system. 2 wire bus structure enables easy installation.Product Features:32 Zone Addressable Inputs (RS-495).16*2 Back light LCD display2 Wire Bus StructureFast ResponseCapacitive Touch Pad with 20 keysUp to 8 Hours Battery Backup (With out detector).Siren output is available(110db)Auxiliary relay output is provide for interface other systemOptional Communication Interfaces100 Event Logs

TrueSafe LPG Gas Leak Detector, this is gas leak detector for detecting LPG gas leakage at Home. The output of the detector drives the control valve. Control valve is fitted in gas line. Once the gas leakage is detected by detector valve cuts off the gas supply in less than 1Sec by shutting off the valve. The valve can be reset or opened only manually. This is provides additional safety and allows manual inspection before resuming the gas supply.Product Features:Kitchen platform panel mountable.Automatic calibration at the desired level of LEL (Usually 10% of LEL).In addition, it can detect heat.Can be interfaced with gas detection panel.

A carbon monoxide gas detector or CO detector is a device that detects the presence of the carbon monoxide (CO) gas in order to prevent carbon monoxide poisoning. CO detectors are designed to measure CO levels in the air. It gives an alarm before dangerous levels of CO gather in an environment. Also gives people warning for safe ventilation of the area or evacuation. TS12HC1RB are ideally suitable for applications where additional safety is required. The detector is positioned in such a way that gas leakage is detected as soon as possible.Product Features:Automatic Calibration at the desired level of PPMIn addition it can detect heatCan be interfaced with Gas Detection Panel through PFC relay output.

Thermistor based technology is used in this sensor. The basic principle of detecting atmospheric temperature is by using a Temperature sensing Resistor. When atmospheric temperature increases above 60C, the detector generates a signal and sends it to the Fire panel OR Control Panel.Product Features:Dual Fire LED Indication.Thermistor Technology is usedCurrent OutputStylish LookCompatible with all Fire PanelLow Standby Current

TrueSafe LPG Gas Leak Detector is a gas leak detector for detecting LPG gas leakage at Home.The detector is positioned in such a way that gas leakage is detected as soon as possible. It gives buzzer, when the gas leakages from gas cylinder.Product Features:Kitchen Platform Panel mountableAutomatic Calibration at the desired level ofLEL (Usually 10% of LEL).In addition it can detect heatCan be interfaced with Gas Detection Panel through PFC relay output.

Optical smoke detector IGNIS is a photo electric smoke detector that uses a state of the art optical sensing chamber. Its advanced design ensures optimal response and stable long-term operation thanks to its self check functions, automatic sensitivity compensation and status warning.Product Features:Optical Smoke Detector model IGNIS.Available with low profile base and high base with four 20 mm inputs.Independent head, bayonet system assembly and extraction lock.Nickel-plated phosphor bronze contacts, double-sided double-grip connection.SMT Design, High stability.Wide supply voltage range.

This product consists of Photoelectric smoke and heat detector. It detects the smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke which can reflect infrared light.Product Features:Fire LED Indication.Dual Sensing input (Smoke + Heat)Remote LED Indicator OutputStylish LookCompatible with all Fire PanelLow Standby Current

TSGR21 is used for fire detection as well as suppression. Along with fire detection, it is used as a suppression panel to suppress fire using gas release system. Main purpose of this system is to monitor the fire and pressure switch of fire suppression gas system. When fire is detected, panel will activate the solenoid valve to release the suppression gas cylinder. Display shows the fire zone. This system can monitor the pressure of main as well as stand by gas cylinder. Once the main gas cylinder is consumed or has been sent for refilling, the system will select the stand by gas cylinder from menu for use. This product has one higher version i.e. TSGR21+Product Features:Battery backup with built in charging16 X 2 LCD Dot Matrix DisplayKey pad Enable/ Disable and Evacuate FacilityAuto, Manual and Maintenance mode FacilityLow battery visual warning with audible toneRelay output for actuatorsProvision for Remote fire with Audio / Visual IndicationsCompatible to all types of conventional detectorsZone Disable facilityResettable 24 VDC output for 4 wire detectorsThree 24 V Monitored sounder Output (Fire, Cross Zone, after GAS Release)Programmable Solenoid Output with ON and OFF TimerProgrammable Main / Standby Cylinder output Facility.Gas Inhibit and Instant release facilityManual Gas Release with or without timerActuator and Pressure switch sensing facilityModular Construction, ServiceableAuto Re-settable FuseBattery polarity & Battery degraded WarningVariable solenoid ON / OFF time2 Nos of programmable Initiating Device Circuit and 1 No. of Releasing Agent circuit

Model TrueSafe TS21I-CAT gas detector is used to detect natural gas, LPG, coal gas, alkane, combustible gas, and gasoline, Alcohol, ketone, benzene etc., organic solvent as well as Hydrogen gas. Application area of this detector is in Automotive, Medical, Refineries and Petrochemical Plants, Oil and Gas, LPG station, Chemical and Pharma Industries, Power plants, Gas Boiler, and Spray-Paints etc where gas leakage is possible.Product Features:Calibration required as per OISD / Safety Standards.Simulate alarm, fault and warning.Replaceable Sensor Provision.View gas reading, configuration and diagnostic.Wide Operating Temperature Range.Immune to Catalytic Poisons.Failsafe Operation.BISCM/L3927980 Certified.

This product consists of Photoelectric smoke and heat detector. It detects the smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke which can reflect infrared light.Product Features:Fire LED Indication.Dual Sensing input (Smoke + Heat)Remote LED Indicator OutputStylish LookCompatible with all Fire PanelLow Standby Current

Intelligent GSM Speaker Phone (iGSP) is a two way voice calling system for specially design for ATM/Banks/Retail security. It receives phone calls from 10 authenticated users. Which is registered by SMS in system. iGSP unit kept inside the ATM/Bank lobby OR user specified location. For example, user from control room can communicate with attendant/customer in the ATM room/bank branch/warehouses. There is provision for SIM cards in the unit. An external speaker is connected to the unit. When authorized user dials the SIM mobile number, system will auto receives the phone call and any person near to the iGSP unit can communicate with the user.Product Features:Authenticated 10 Numbers can place the call to the unit.10 Numbers can be updated by sending SMS.Excellent voice quality of Mic.Loud and clear Speaker output.LED Indications for Network Range & AC power on indication.

Conventional Heat detector IGNIS is a thermal heat detector that uses a static heat element of 57 C. It is designed to respond when the convicted thermal energy of a fire increases the temperature of a heat-sensitive element.Product Features:Thermal heat Detector model IGNIS.Available with low profile base and high junction base.Independent head, bayonet system assembly and extraction lock.Nickel-plated phosphor bronze contacts, double-sided double-grip connection.SMT Design, High stability.Wide supply voltage range.

TSGC-230 is Indias first IoT (Internet of Things) based GAS Leak Detector. The TSGC-230 provides reliable gas detection for protection for Domestic Kitchens, Small Office Pantry Rooms, etc. TSGC-230 provides buzzer, LEDs for indications with cloud connectivity through WiFi. It is compatible with LPG, CNG, PNG. It is used for detecting gas Leakage from cylinders or pipelines and send their status on Fire Cloud Mobile App (Android or iPhone App).Product Features:Detects gases - LPG, CNG, Natural gas etc.Potential free relay contacts for alarm output (Optional).Cloud Connectivity through Wi-Fi (Internet connection).True Safe Detector has unique patented enclosure design.Semiconductor type sensor, life is 2-3 years.Notification on the Android or iPhone APP

Gas Detection System is basically a conventional 2-zone system to protect home as well as commercial premises. It has a siren output for audio GAS alarm indication. Other LED indications for sensors are open, short, bypass and gas Detection. Zone bypass facility is available with separate key for each zone. All the keys can disable by using a key lock arrangement. When the gas is detected by any one of the gas detector within a zone alarm should be activated.Product Features:Dual LED GAS Detection IndicationTouch Capacitive Key PadGAS Control Valve OutputLow Battery IndicationBattery Disconnect IndicationAC Fail Indication

Gas Detection System is basically a conventional 4-zone system to protect Home as well as commercial premises. It has a relay output siren for audio GAS alarm indication. Other LED indications for sensors are open, short, bypass and gas Detection. Zone bypass facility is available with separate key for each zone. All the keys can disable by using a key lock arrangement. When the gas is detected by any one of the gas detector within a zone alarm should be activated.Product Features:Dual LED GAS Detection IndicationTouch Capacitive Key PadGAS Control Valve OutputLow Battery IndicationBattery Disconnect IndicationAC Fail Indication

Product Features:16 x 2 Backlight LCD DisplayTactile 18 Keys Key Pad (external keypad of 18 key supported*) Inbuilt GSM Auto Dialer (compatible to PSTN dialer also Add on support GPRS module and IP module support SIA DC 09 protocol)10 Voice & 10 SMS Reporting Number Suppor20 second pre-recorded voice message. Message playback facilityUp to 500 number of event supportProvision for partial arm and auto arm / disarm (day/night mode) zone facilityScheduled base arming & disarmingArming and disarming through keypad, wireless key fob, SMS and using android app.Upgraded to IP connectivity ready (optional*)

TSFC24-4 is a four-zone fire alarm panel with cloud connectivity. This is not like an ordinary panel; it is Indias first IoT based conventional fire alarm panel. This panel is connected with cloud through Wi-Fi (internet) and stores all fire and fault information on it. We are providing mobile app along with our system. It is used for monitoring the fire panel status on mobile from anywhere from the world.Product Features:Receive Fire & Fault alerts on your mobile appSturdy metal Enclosures

TS12CEx is LPG Gas Leak Detector for commercial segment. Application area of this detector is Refineries, Chemical plant, Gas Cylinder Refilling , Gas Boiler, and Spray- Paints etc Where gas leakage is possible. It reads the gas concentration in Air. If concentration reaches to hazardous level, it will generates alert and send signal to the Gas detection panel OR BMS. Semiconductor type of gas sensor is used in this detector .This sensor provides good reproducibility. It has long life-span and easy to operate. PFC Relay output is used to connect or interface conventional Gas Detection Panel OR SCADA system/BMS. Semiconductor sensor is used in this model.Product Features:Gas Sampling by Natural diffusionAuto CalibratedReplaceable Filter & Gas SensorManual Calibration (On Site)PFC Relay O/P (NO or NC)Explosion Proof Enclosure is usedIndian MFG Product

It detects LPG or PNG and warn before the gas density in air reaches unwanted levels.Dustproof & Water Splash proof IP65 EnclosureReplaceable FilterOnly Commercial Detector available with LEL BargraphCan be interfaced with Gas Detection Panel

ATM AVV is designed considering Safety, Security & Surveillance needs of ATMs, Bank ATMs are subject to theft, vandalism of assets. ATM AVV can be integrated to audio & video recording facilities. Two way voice device is used to warn the intruders. Upto 4 CCTV Cameras, 1 Audio Microphone and 1 Speaker could be connected along with upto 31 Sensors, 4 smoke zones and 32 Wireless sensors to this panel.Product Features:Support SIA protocol plus reverse commands for controlling panel operation ( *customize protocol can be supported )All zones and parameters are user configurable with the help of Panel utility.Centralized monitoring of specified events in multiple ATM locations or branchesLED Indications on keypad:RED LED - For Alarm ConditionsGREEN LED For Fault ConditionsBLUE LED When in Arm LED continuously ON*EM (Electro-magnetic) Lock with keypad to access backroom with unique codes for different companies.keypad with LCD with unique codes (up to 19 different codes to support 19 different agencies) for Disarming the Chest Door Sensor of the ATM machine , Back room door sensor , Cheque drop box etc. ( * others zone can be configure through Utility)Access can be controlled at any essential points where it could be necessary to restrict or regulate entry.Multiple keypad support up to maximum 4 keypads.All zones can be configured as NO or NC.Buzzer and siren indication for Alarm on site and alarm reported to AEMS.Auto ARM feature - settable time through utility and configuration fileUpgradable firmware from remote location.One touch zone configuration from remote location by configuration fileInbuilt Self diagnostic tool to show zone status, reboot, threshold adjust parameters50 event logs can be stored.*Support up to 4 CCTV Cameras*Support 1 two way communication portSupport up to 31 Intrusion Sensors inputs4 Conventional smoke zones and*Support up to 32 Wireless sensors zones (optional)*4-8 relays box support - (Signage, AC, Backroom, Lobb

ATM AVV is designed considering the Safety, Security & Surveillance needs of ATMs as well as Banks, Bank ATMs are subject to theft, and vandalism of assets. ATM AVV can be integrated into audio & video recording facilities. A two-way communication device is used to warn the intruders.1 Audio Microphone, and 1 Speaker could be connected along with up to 31 Sensors (Including panel tamper, Mains & UPS sensing, Silence Key), 1 smoke zone to this panel, externally cameras can be integrated with Ai facility for various detections.Product Features:Support SIA protocol plus reverse commands for controlling panel operation (*customize the protocol can be supported)All zones and parameters are user configurable with the help of the Panel utility.Centralized monitoring of specified events in multiple ATM locations or branchesLED Indications on keypad:RED LED - For Alarm ConditionsGREEN LED For Fault ConditionsBLUE LED When in Arm LED continuously ON*EM (Electro-magnetic) Lock with the keypad to access the backroom with unique codes.keypad with LCD with unique codes (up to 19 different codes to support 19 different passwords) for Disarming the Chest Door Sensor of the ATM machine, Backroom door sensor, Cheque drop box etc. ( * others zone can be configured through Utility)Access can be controlled at any essential points where it could be necessary to restrict or regulate entry.Multiple keypads support up to a maximum of 4 keypads.All zones can be configured through the utilityBuzzer and siren indication for Alarm on-site and alarm reported to CMS.Auto ARM feature - settable time through utility and configuration fileUpgradable firmware from a remote location.Support 1- two-way communication.Support up to 32 Intrusion Sensors inputs1 Conventional smoke zone.4-relays box support - (Signage, AC, Backroom, Lobby light, etc)

TS12CHR is a Hydrogen Gas Leak Detector. Safety of commercial & industrial battery back-up power stations is of prime importance. It detects Hydrogen gas leakage and warns before the gas density in the air reaches unwanted levels.Product Features:Dustproof & Water Splash proof IP65 EnclosureReplaceable FilterOnly Commercial Detector available with LEL BargraphCan be interfaced with Gas Detection Panel

The iVS Sensor is designed for the security purpose. Vibration Sensor gives alarm when it recognizes movement or vibration. It sends a signal to Intrusion control panel. This sensor is new type of omni-directional high sensitivity Security Vibration Detector with omni-directional detection. iVS can decipher between different types of vibration and raises an alarm only when it finds genuine threat.Product Features:Identifying vibration type.Low power consumption.Tamper detection.LED indication.Sensitivity adjustment

TS12CC1R is a Carbon Monoxide Gas Leak Detector. It is ideally suitable for applications where additional safety is required. The detector is positioned in such a way that gas leakage is detected as soon as possible. Output of the detector is PFC relayProduct Features:Dustproof & Water Splash proof IP65 EnclosureSemi Conductor type sensorReplaceable FilterNo Calibration required

Beam Detector uses invisible light to scan a defined area. The transmitteremits a beam of light into the scan zone. The light, which is reflected by the background returns to the receiver, which constantly monitors the scan zone. When a person or object enters the zone the infrared light is interrupted. It then sends a signal to the internal relay, which is wired into the door controls. One variation of this operating mode is called "background suppression". This is when the receiver only detects a change in the reflected light when a person or object enters the scan zone thus causing a reflectance variation of the light, sending a signal to the internal relay.Product Features:Dual BeamsActive Photoelectric technology is usedTamper ProofDigital Frequency Convertor is used inside detectorPC Engg. Plastic Material Housing

This is wired Pet-immunity passive infrared with high stability. It takes advance signal processing technology, providing super high detection and anti false alarm abilities and MCU processing ensuring the reliability from the design basis. When the intruder passes through the detection area, the detector will detect the movement of the human body automatically. If there is any movements, it will send an alarm signal to the connected alarm host.Product Features:Immunity of less than 12kgs petDouble temperature compensationPulse count adjustmentAnti white light adjustmentCan installed on Wall / corner

Vighnaharta introduces battery operated Wireless Door Magnetic Sensor (WDMS) based on 865MHz wireless LoRa technology. The sensors embedded LoRaWANTM Class A protocol enables seamless connectivity to any LoRaWAN compliant network infrastructure.Product Features:Magnetic Reed Switch SensorLoRaWANTM Class A protocolLow Battery Indication before 30 daysTransmission: Periodic or events(2) AAA Battery PackOperating temperature: -10C to +55C

This product is a battery operated long life, temperature Sensor, -adopting unique structure design and advanced microcontroller technology, able to monitor in real time. It provides a reliable, convenient and cost-effective solu-tion for temperature sensing.Product Features:Easy InstallationWiFi with WPS & OTA Support, SSID and PasswordSetting like Pre Alarm and Alarm temp and data intervalSupports MQTT (HTTPS available on request)IP certified enclosure (on request)