Other Products / Services #477339

REFCON design, manufacture, supply, install and commission Freon Ammonia based Flake Ice Plants in Packaged form for smaller requirements and as a site installation for bigger requirements, capacities available are from 0.5TPD to 50TPD, and in modules of 50TPD for higher capacity requirement.

REFCON design, manufactures, supply, install and commission Freon Ammonia based Dehumidification system, required for industrial application, to control humidity in production area. The Temperature and Humidity level can be designed to individual requirement. (Humidity Level upto 40-35% RH). REFCON supplies High Side Refrigeration equipment as well as low side material and takes total turnkey job with ducting, insulation, acoustic insulation etc. Since most modern machinery require a controlled environment to operate; international standards for dehumidification plants, and reliable Indian dehumidifier manufacturers is vital for the nation's steady industrial progress. At REFCON Technologies & Systems Pvt. Ltd, we want to bring this new age of India's growth the best services and products - since we are one of the nation's biggest, most prestigious, and among oldest refrigeration systems, cooling solutions, and dehumidification plants manufacturers.

REFCON design, manufactures, supply, install and commission Freon / Ammonia based Dehumidification system, required for industrial application, to control humidity in production area.

The Temperature and Humidity level can be designed to individual requirement. (Humidity Level upto 40-35% RH). REFCON supplies High Side Refrigeration equipment as well as low side material and takes total turnkey job with ducting, insulation, acoustic insulation etc.

Since most modern machinery require a controlled environment to operate; international standards for dehumidification plants, and reliable Indian dehumidifier manufacturers is vital for the nation's steady industrial progress. At REFCON Technologies & Systems Pvt. Ltd, we want to bring this new age of India's growth the best services and products - since we are one of the nation's biggest, most prestigious, and among oldest refrigeration systems, cooling solutions, and dehumidification plants manufacturers.

We are not only one of the first names as Industrial cooling systems providers; but also among the only industrial dehumidifier manufacturers in India to work on all the leading International Standard Certifications - ASME, TEMA, ASHRAE, ISHRAE, and IS Standards!

We custom design a range of dehumidification plants and climate control systems; and undertake the most challenging turnkey projects in the country, and across the world. REFCON Technologies & Systems Pvt. Ltd., along with our Group Companies; is among India's leading dehumidifier manufacturers, and among the largest suppliers and service providers for various industrial cooling systems and equipments.

While we cater to huge brands like Hindustan Unilever Ltd. and Laffans Petrochemicals Ltd.; if you're looking for the most dependable and efficient service providers, and even small scale custom solutions from one of India's best Dehumidification Plants manufacturers - REFCON Technologies & Systems is your most reliable and resourceful vendor!

Today it is necessary to maintain proper and required room conditions like Temperature, Humidity, Air quality in Terms of Class contentiously for pharmaceutical chillers or Pharma chilling plants product (Bulk Drug/Formulation) manufacturing units, as per WHO standards.
Refcon carry out Design, Heat Calculation Layout, Ducting Mfg. and supply of AHU condensing Unit, Electrical Panel.

Refcon with its enriched experience provides, Turnkey Services like Site erection, Installing and commissioning of complete system for establishing and maintaining Pharmaceutical Clean Rooms, Pharmaceutical Air Conditioning, Pharma Chilling Plants and Condensing Unit with required quality. Air class by install required micron Pre, M.V. and HEAPA Filters as per requirements of schedule M and GMP standards.

AHU ( Air Handling Units )

• Double/Single skin Construction.
• Made out of Heavy Aluminum Extruded Section with Heavy Ms Base Frame.
• Powder Coated, 25mm/ 50mm PUF Insulation Panels, (GI Inner and Outer Skin)
• Krugger/Nicotra forward/backward curved DIDW fans with Drive Motor.
• Fan, Coil Filters Section, Mixing Chamber with Supply, Return Fresh Air Dampers
• rovision of service door in blower and mixing section wherever required and the doors and panels will be sealed with rubber gasket.
• We take special care to provide zero air leakage in AHU system.

Condensing Units

Highly efficient condensing units, with Rotary/Scroll/Reciprocating Compressor are provided, the Units are manufactured with utmost care and are power efficient, consuming optimum required power for required capacity.

• Reliable and highly energy-efficient scroll compressors
• Mega power savings with tandem scroll models
• Tropicalised design for high ambient temperatures up to 52 degree C
• Auto distribution of load for efficient running of the chiller
• Capacity modulation ensures that only required number of compressors operate to handle the load, thus saving power
• Lower electrical infrastructure cost
• Quiet operation

REFCON design, manufactures, supply, install and commission Freon / Ammonia based Gas Liquefaction Plants required for liquefaction of gas like Carbon Dioxide.

REFCON has successfully installed equipment for Carbon Dioxide Liquefaction, with environment friendly Refrigerant (R-404a) operating at (-) 30 Deg C Evaporating Temperature & 50 Deg C Condensing Temperature.

The equipments can be tailored to individual requirement.

We provide equipment for Carbon dioxide (CO2), Nitrogen (N2), Oxygen (O2).

REFCON design, manufactures, supply, install and commission Freon / Ammonia based cold storage plants. REFCON manufactures and supply cold storage with prefabricated PUF Panels and Monoblock Refrigeration Unit up to (-) 40 Deg C room temperature requirement. Also we take turnkey job (except civil work) for developing bigger size cold storage plants.

Refcon Offers sandwitch type pre-fabricated, ready to assemble polyurethne foamed (PUF) panels for cold stores with monoblock (packaged/split) type refrigeration units. It is extremely easy and quick to assemble on cold storage cell. The elements, Prefebricated with the sandwitch system, are light and easy to handle, but at the same time, are robust and compact once assembled. Standard modular lengths from 200mm to 1500mm, heights from 2000mm to 6000mm.

• Puf Resin complying with ASTM D 1692/58 DIN 410285 specifications.
• High insulation coefficient, density 40 kg/cu.mt, high pressure injection techniques
• Inner/Outer finish available in, self extinguishing fibreglass, stainless steel AISI 304
• Galvanized plate, galvanized pre painted and galvanized pre-plastcized sheet metals
• PUF Insulation thickness available from 50mm to 200mm
• Low wall thickness compared to block/brick wall
• Low maintainance and excellent weather tightness large panel size will reduces joints
• Fast erection time saves cost of construction with one step installation, as compared to multi step field work of conventional insulated buildings.
• Specially designed Camlock are provided, which holds the panel in place and together in two stage actions, tongue and groove Joints are provided to secure tight fit.
• Doors are available in various thickness and sizes with imported/Indian fittings.
• Floor is provided with marine ply and chequered plate.