Our Products
castrol chain lubricants is a high temperature chain lubricants, which has been specifically formulated with synthetic base stocks having unusually high temperature lubricating capability. Careful selection of additives results in a fluid, which resist high temperature decomposition and prevents the formation of sludge or carbon normally produced by petroleum based products. This results in longer equipment life, less maintenance, better efficiency, while costly downtime is significantly reduced. applications castrol viscotex kl 23 is designed and formulated for chain operating tmperature applications between 350of175oc (the point at which synthetics becomes cost effective compared to mineral oil based lubricants) and 391of235oc. viscotex kl 23 lubricants is designed for the lubrication of roller chains, slides, cams and general lubrication where a high temperature synthetic lubricants is needed. Major applications include industries using high temperature conveyor systems used for baking, coating, drying and curing. Product application may be achieved by drip, spray, splash and automotive dispensing equipment. product benefits
castrol engine oil were developed specifically for service in advanced numerically controlled (nc) hydraulic systems, including robotics. These high performance, multiservice oils can extend service life for uninterrupted machine availability and production. The following performance characteristics are emphasized : the base oils in tribol 943aw fluids are selected for chemical and thermal stability. They are also selected for the naturally high film strength necessary to prevent rupture at the highest pump pressures and tightest clearances where operating conditions usually lead to mixed or boundary (contact) lubrication. The antiwear characteristics of the 943aw fluids are achieved by a unique additive system which does not include zinc. Tribol 943aw fluids are part of castrol performance lubricants eco-solutionstm product offering. Formulated to address environmental concerns, tribol 943aw fluids are free of lead, zinc, chlorinated solvents, and barium. They contain less than 2 ppm of phenol. The unsurpassed oxidation stability of the 943aw fluids is a result of extensive research to stabilize petroleum oils at high operating temperatures. The balanced, total additive system in 943aw fluids also inhibits foaming, and provides an unusual degree of corrosion protection - see typical properties. applications in fact, drain intervals approach the range of some synthetic fluids. Tribol 943aw fluids may also be used in reciprocating compressors if temperatures are not high and units are not prone to valve deposits. Tribol 943aw fluids have been approved by the usda as h2 lubricants acceptable for use where there is no possibility of food contact in official establishments operating under the federal meat and poultry products inspection program. advantages notes filtration - where the ultimate in oil cleanliness is required, as with robots and other nc machines, portable filter systems and hardware, and related engineering services are available from castrol performance lubricants engineering department. For specific terms, conditions, warranty, and availability, refer to castrol performance lubricantsprice list in effect at time of purchase.