Our Product / Services
We are offering orbital incubator shaker cooling model. Temperature range 5c to 50c with an accuracy of +- 1c double walled insides. Steel and outside mild steel painted and two air circulation fans. Full view inner glass door with magnetic gasket allows inspection of samples without disturbing. The temperature of cabinet. To work on 220230 volts. A.c.
Additional Information:
Packaging Details : Wooden Box
Delivery Time : 10
Sterilizer single door fully automatic: rectangular chamber size (w x h x d) : 300 x 300 x 1200 m.m. Capacity: 108 liters approx. inner chamber: ss304, 4mm outer body: ss304, 1mm door: manual operate chamber operating pressure: -500 to -450 negative pressure cycle (safety features) gasket: silicon rubber gasket glass wool insulation door type: hinged door sterilization time : 6/8 hours machine features: programmable plc (hmi) with touch screen display sterilization temp.: 33- 55c (selectable) gas manual transfer into chamber cycle stage auto complete vacuum pump inbuilt heating system (circulation pump 1hp) will rotate hot water around chamber heater load: 12 kw or 18 kw water tank (80-100-150liter) thermal printer inbuilt for cycle print, eto. Gas cylinder (manual transfer in chamber) vacuum gauge inbuilt y type angle walls (operate by air compressor) all fitting & piping s.s.304 screen on control panel indicates specific phase during the operation. the operator by means of messages on indicator and buzzer control facility: automatic/manual operate cycle will be not start if door is not lock properly
We are offering lyophilizer machine. Application advantage heat sensitive biological materials may be freeze-dried without affecting their potency. The dried materials may be stored for years at room temperature without loss of their original characteristics. the freeze-dried material may be transported and shipped in small containers, and no provision is necessary for refrigeration enrooted. bacterial growth and enzyme action do not take place in freeze-dried products and proteins do not coagulate. oxidation of many materials such as haemoglobin and vaccines is completely prevented when drying and sealing is done under high vacuum. what is freeze drying? freeze drying is the process of removing the moisture from a biological product while maintaining the integrity of the biological products, chemical structure and activities. Freeze drying technology is used in particular for removal of moisture from the products usually of biological origin without causing any noticeable change in the original characteristics. Freeze drying is also the preferred process in the field of pharmacy, chemistry and in conservation of food. how freeze dryer works: all "aps" units are provided with following basic requirements:- a drying chamber or manifold on/in which the containers with pre-frozen samples are connected/placed. a high vacuum double stage pumping system with gas ballast with ultimate vacuum of less than 50 microns in the system and 10 microns on pump head to facilitate the vapour flow to the condenser for speedy drying. a low temp. Condenser to trap the moisture vapour and allow the non- condensable vapours to go to the pump for release to the atmosphere. construction & salient features housed in a super structure steel frame it is mounted on swivel casters. complete with perspex see through lid, gasket and control instruments i.e. Microprocessor based digital temperature controller for measurement of temp. & electronic digital vacuum indicator. the unit made out of hermetically sealed compressor and can be optionally fitted with 100 litters/ min direct motor drive rotary vane type vacuum pump of double stage with air ballast having ultimate vacuum of 1x10-3 torr on pump head. high grade puf insulated between outer and inner chamber for minimal thermal losses.
Additional Information:
Payment Terms : D/P, T/T
Packaging Details : Wooden box
Delivery Time : 15-20 Days
Horizontal autoclave (cylindrical) triple wall with pressure switch & water cutoff a) autoclave (horizontal cylindrical (triple walled with steam jacket). The autoclave is mounted on a mild steel tabular stand. the autoclave chamber & steam jacket are made of 14 swg. Stainless steel, outer shell which serves as a cover is made of stainless steel. steam jacket allows dry sterilization. Hinged door is made of stainless steel. Radial locking arms prevent opening of the door while steam is inside the chamber. autoclave is fitted with neoprene gasket; steam is generated in a separate boiler which is placed below the main body. multiport valve is provided for steam, dry sterilization & steam exhaust. Autoclave is fitted with easily replaceable heaters and water level indicator. autoclave holds pressure at selected point between 10 to 20psi +/- 3 psi. pressure control has markings which are approximate; the actual pressure is as shown by the pressure gauge. hydraulically tested at 40psi. Fitted with safety valves pressure is as shown by the pressure gauge. Hydraulically tested at 40psi. fitted with safety valves pressure gauges, steam release valve, steam trap, and one tray
Additional Information:
Payment Terms : L/C, D/A
Packaging Details : Wooden box
Delivery Time : 10 Days
We are offering autopsy table our company specializes in offering qualitative range of autopsy table. These autopsy table are ideal for usage in any sort of postmortem work. The designing of these table includes heavy gage stainless steel & conveniences and state-of-the-art engineering. This range of autopsy tables is mounted on stainless steel tubular stand and is scientifically manufactured for providing maximum efficiency. Also, these are provided with two body-supports of width 6 and are removable along with the six position head rest and crusher (grinder/aspirator) for disposal. Additionally, this range possess chrome plated swing spout mixing faucet for hot and cold water and lever handle for waste & drain along with deep & large s. S. Sink with overflow.
Additional Information:
Payment Terms : L/C
Packaging Details : Wooden Box
Delivery Time : 10 days
We are offering bio safety cabinet applications "biosafe biological safety cabinet class iii exhausts 100% of air in the cabinet. rew" bio safe cabinet is used to protect personnel, product and the environment from exposure to biohazards and cross contamination during routine procedures. used for various applications in the life science, clinical, pharmaceutical and industrial laboratory. these cabinets are designed to provide 3 basic types of protection. 1) personnel protection from harmful agents inside the cabinet. 2) product protection to avoid contamination of the work, experiment or process. 3) environment protection salient features & construction low cost. low noise. user friendly ergonomic design. controlled environment particulate free product protection. work area surrounded by negative pressure, double wall plenums for protection. aerodynamic designed airflow grille maintains safety by preventing blockage. silent vibration-free blower ensures noiseless operation. sound level no more than 65 dba. the unit is suitable for class 100 conditions. 100% of the air is re-circulated through the hep a filter. filtered exhaust protects ambient environment, and avoids build up, air borne particles. the exhaust of safety cabinet is connected to the virus burn out unit for product and personnel protection. air is drawn through pre-filter and is made to pass through high effective hep a (high efficiency particular air) filters. the efficiency of hep a filter is greater than 99.97% down to 0.3 micron. basic material is thick board wood front back top and exterior surfaces are covered with formica. or cold rolled steel duly powder coated or stainless steel (ss-304) (as ordered). working table is made of stainless steel sheet (ss-304 grade).
Additional Information:
Payment Terms : L/C, D/A
Packaging Details : Wooden box
Delivery Time : 7 days
Rew Horizontal Fully Automatic Autoclave
Automatic Purging for Moisture Removal
Automatic Steam Transfer
Automatic Steam Release
Soak Timer
Gasket Made of Joint less Silicon
Display Digital
Exhaust of Pressure Manual through a Exhaust Valve
Sterilizing Pressure 1.2 to 1.5 kgf. (15 to 35)PSI
Operating Pressure 15 to 35 PSI
Pressure Gouge 0-4 kgf/cm (50 Psi)
MOC Chamber 3.5mm 304 Grade
MOC Jacket 2.5mm 304 Grade
MOC Boiler 3mm 304 Grade
MOC Door Lid 12mm 304 Grade
Power Supply 440 Volts 3 Phase Supply
Features
REW Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
All ideal tool for Laboratories, hospitals, nursing home, R&D labs, etc.
The inner chamber, steam jacket, outer chamber, and boiler are made of heavy gauge stainless steel with leak-proof argon arc welding.
Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
Hydraulically tested to withstand 2.5 times the working pressure.
Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device, and automatic pressure control device.
Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/cleaning.
The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when the chamber is exhausted.
This affords complete safety to the working personnel against the explosive opening.
Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.
The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
An automatic vacuum breaker is fitted to all REW units as a standard accessory, in order to break vacuum in case of steam condensation.
The flange immersion-type heating element made from very high-grade material provides the fast formation of pressure in the system and are protected through an electric low water level cut-off device.
All REW Sterilizers are provided with triple safety features, through a PIEZOSTAT (Automatic Pressure Control System) and a spring-loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring-loaded safety valve and a dead weight release valve.
Highly accurate temperature indicator is fitted for monitoring temperature.
To work on 440Volts, 3phase, 50Hz AC supply.
Additional Information:
Payment Terms : D/A, D/P
Packaging Details : Wooden box
Delivery Time : 10 Days
We are offering mortuary chamber. mortuary storage system is designed for storing cadaverous under cool condition to prevent decomposition. These are latest development in mortuary technology offering vast space saving advantage over the conventional type together with greater hygiene. Useful for hospitals, railways & airports etc. Double-walled with stainless steel and stainless steel inner chamber with insulation in between. Front opening, hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead bodies. Trays to carry dead bodies with handles at both ends travel on rollers fitted for easy movement. Exterior surface in chemically treated, antirust coated and duly finished with powder coated paint. To avoid any moving part inside the cabinet, for easier maintenance and cleaning refrigeration unit is kept outside the chamber and fixed at rear. Temperature of 2c to +5c is maintained by hermetically sealed refrigerator compressor unit and is controlled by an automatic electronic solid state digital temperature controller cum indicator. temperature controller is mounted on front panel, provided on front top, along with pilot lamp, main switch etc. Supplied complete with trays, cord and plug. Suitable to work on 220 v, single phase, 50 hz, ac supply.
Additional Information:
Payment Terms : L/C
Packaging Details : Wooden Box
Delivery Time : 15 days