We are one of the leading Manufacturers, Exporters, and Suppliers of
PVDF Sump Pump. Our PVDF Sump Pumps possess heavy-duty design with thick walled volute casing and back plate. There is no requirement of shaft sealing in our PVDF Sump Pumps. The specialized bush bearing at the bottom end of the shaft minimizes the shaft deflection. All the hardware is of Polypropylene with metal insert. The available submerged Length of PVDF Sump Pump is 0.5 mts, l.0 mts, 1 .5 mts, 2.0 mts & 2.5 mts.
Heavy Duty Engineered Polyproylene/PVDF Sump-Pump for primary Effluents/Corrosive Liquid and Scrubbing System :
- Heavy duty design
- Thick walled volute casing & Back plate
- Semi-open Impeller with large metal insert
- Shaft sealing not required
- Specislized CFT bush bearing at bottom end of shaft to minimize to shaft deflection
- All hard ware are of polypropylene with metal insert
- Available submerged Length : 0.5 mts, 1.0 mts, 1.5 mts, 2.0 mts & 2.5 mts
- Maximum head-30 mts, Maximum flow-30m3/hr
*Technical Details Available on request
Warantee Clause : We stand guarantee only the genuinety of PVDF Resign in our pumps but not stand gaurantee for any king of chemical, physical & toxicological effects on the same by the liquid handled with our pumps. Since the conditions of handling and useare beyond our control, we make no guarantee of results. We assume no liability for injuries, damages or penalties resulting from its use whether or not our recommendations are followed. Our recomendations are only on the basis of our past experienceand should be taken as guarantee.
Part List for VSP Pumps
No.DescriptionM.O.C.Qty.1Voute CasingPolypropylene1 No.2Back PlatePolypropylene1 No.3ImpellerPolypropylene1 No.4Cage RingPolypropylene2 Nos.5Back Plate BushCarbon Filled Teflon1 No.6Shaft SleeveHast-B/Ceramic1 No.7Shaft with HDPE SleeveEn8 / HDPE1 No.8Column PipeHDPE1 No.9Discharge PipeHDPE1 No.10Discharge FlangePolypropylene2 Nos.11Discharge ElbowPolypropylene1 No.12Elbow FlangePolypropylene1 No.13Pump Support PlateM.S. with PP Lining1 No.14Motor Support Stool - BottomC.I.1 No.15Motor Support Stool - TopC.I.1 No.16Bearing Cover - BottomC.I.1 No.17Bearing Cover - TopC.I.1 No.18Ball BearingSKF - 62071 No.19Ball BearingSKF - 73061 No.20Oil Seal (35x60x10)Neoprene3 Nos.21Oil Seal (25x40x10)Neoprene1 No.22Flexible CouplingC.I.1 Set23Lock NutSteel2 Nos.24Motor25Eye BoltsSteel2 Nos.26Back Plate FlangePolyproplylene1 No.27StrainerPolyproplylene1 No.28Hardwares for Clamping Cage RingSteel / PP8 Nos.29Hardwares for Clamping Casting & Elbow FlangeSteel / PP4 Nos.30Hardwares for Clamping Column Pipe & Back PlateSteel / PP6 Nos.31Hardwares for Clamping Column Pipe & Pump Support PlateSteel / PP6 Nos.32Hardwares for Clamping Discharge Pipe FlangeSteel / PP4 Nos.33Hardwares for Clamping Bearing CoverSteel8 Nos.34Hardwares for Clamping Motor & Motor StoolSteel12 Nos.
Note : - The pumps are available in five standard vertical length, 500mm, 1000mm, 1500mm, 2000mm, 2500mm
- At he time of ordering spare parts please specify submerge depth size of the pump.
- The pump is designed up to 1.5 mts. submerge depth single column pipe and from 2 mts. to 2.5 mts. submerge depth the pump is designed with double coulmn pipe.
- The submersible depth is measured from the pump support plate.
Mumbai, Maharashtra, India
Verified
Add Review
