Mumbai, Maharashtra, India
Verified
Add Review
Our Products
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 kgs HDPE Carboys
Delivery Time : 15 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 KGS
Delivery Time : 7 DAYS
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 15 days
Is a dry strength resin in powder form. it is to be added in mixing chest after dilution in the ration of 1:10. the dosages will be 2.0 kg per ton of pup. it improves various strength properties of paper. most beneficial for kraft paper to improve strength properties and also for duplex and kraft board for improving stiffness and ply bond.
Additional Information:
Payment Terms : T/T
Packaging Details : 50/100/200 kg
A unique product with a blend of Epichlorohydrin based polymers. it is usual for any Paper & Board industry, to undergo recurring and chronic problems of Fluff/Lint in Paper . Such problems of fluff/lint are overcome by the use and application of the product "CON-TROL"© 1810.The product is useful for application in bringing about uniformity of results. The addition of this chemical reduces/eliminates fluff/lint in paper
Properties
Application :"CON-TROL"© 1810 , is to be added @ 0.10 to 0.25 (1.0 to 2.5 Kgs) per ton of pulp, A recommended product for use and application for normal papermaking conditions. As prescribed, the consumption of 0.2 to 0.3% of the resin provides sufficient improvement in the fluff removal in the paper machine process irrespective of any prevailing state of locations and conditions. The product can be used directly in the mixing chest. It can also be injected with dosing pump before the head box/pressure screen etc.
Shelf Life The product is assured for a long standing life preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight has to be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 KG.
Forming fabrics, wet press felt, dryer felts and dryer screens are clogged by fine deposits & foreign materials. Such deposits result to poor drainage system, loss of production, enhanced cost of energy and leading to inferior quality of produce. Numerous problems are noticeable specific to poor sheet quality, crushing, increase in sheet breaks, higher steam consumption, wear & tear of machine fabrics. FABCLEAN, a recommended product is developed to dispense these intricate problems. It generates efficient fabric cleaning system for paper machine clothing such as wire, press felt, dryer felts and dryer screens.
Properties
Application : "CON-TROL" Fabclean, a product formulation of dispersants, surfactants and emulsifiers, recommended for use and application in the removal and cleaning of dirt, chocked & clogged material without any adverse effect on the quality of fabric. Use and application of product is prescribed after diluting in 1:20 ratio. Before use, allow the machine to run at a low speed. While in the crawling motion, the solution is spread over the surface of the fabric all through the deckle, preferably with shower. On motion, the fabric should be properly soaked with solution for 20/25 minutes. After proper soaking of fabric is processed by applying the use of high pressure shower, rinse it thoroughly with water. Whenever online cleaning is undertaken the dilution ratio prescribed is 1:10 before use of high pressure showers and other felt conditioning vacuum boxes.
Shelf Life The product is assured for a long standing life preferably to be stored in the covered, dry area to be kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 KGS
Delivery Time : 21
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 21 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : "COB-TROL" 0171 is a Polymer and improves various strength properties of paper & board. It improves Burst Factor of Kraft Paper. The product is to added at the outlet of Fan Pump after dilution in the ration of 1:15
Delivery Time : 21 days
We are offering it is a polymer and is to be added in wet end or on size press. most suitable for writing, printing and news print. it also improves drainage on the machine and helps in improvement in fpr
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 Kgs Carboys
Delivery Time : 15 days
This is an effective chemical for removal of hot melt and wax from waste paper pulp. the product is to be added in refining chest prior to refining and consumption will be in the range of 500 to 1000 gram per ton of pulp. we assure minimum reduction of 60 to 70% of hot melt and wax from the pup.
Is a cationic dry strength resin. it is be added in mixingmachine chest @ 3.0 to 5.0 kgs per ton of pulp. it improves strength properties of kraft paper including bursting strength of kraft paper. this product can also be used in size press operations along with starch.
This is an effective chemical for removal of hot melt and wax from waste paper pulp. the product is to be added in refining chest prior to refining and consumption will be in the range of 500 to 1000 gram per ton of pulp. we assure minimum reduction of 60 to 70% of hot melt and wax from the pup.
This is an effective chemical for removal of hot melt and wax from waste paper pulp. the product is to be added in refining chest prior to refining and consumption will be in the range of 500 to 1000 gram per ton of pulp. we assure minimum reduction of 60 to 70% of hot melt and wax from the pup.
Environmental protection confers use of waste paper for manufacturing of various quality of papers. “CON-TROL” 9099 most sought after product by paper manufacturers, effectively disperses ink from the raw material. This de-inking chemical is useful for process under alkaline & neutral pulping conditions. The formulation of the product loosens the ink particle bonded to the paper surface. It thereby help in disintegration of ink mass. Product is most suitable for wash type of de-inking process.
Properties
Applications
Shelf-LifeThe product is assured for a long standing life preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : Use of Dispersant, Alum and Kerosene may affect efficiency of products. R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 KG
"CON-TROL"Supersize-50 is a specially modified fortified rosin soap size with higher active ingredient suitable for internal sizing of various grades of paper in acidic pH condition. A cost effective product resulting to lower rate of consumption for reasons of higher active ingredient content. The product improves and enhances the hydrophobic properties of the resulting paper.
Properties
Applications : "CON-TROL" Supersize-50 may be used as such or in diluted form up to ratio 1:4 with water. Dilution ratio should be reduced in case diluted solution turns milky white. It should be added to the pulp slurry followed by alum solution / PAC for proper mixing and uniform distribution. It is recommended to optimize the dose level of "CON-TROL" Supersize-50 for the requirements depending upon furnish, mill's, operating conditions, final product etc. It is suggested to use a suitable metering pump for dosing "CON-TROL" Supersize-50 to get optimum results.
Shelf Life : Recommended for use of product within 3 months. The product preferably to be stored in M.S., HDPE, and Polypropylene etc. made properly closed suitable containers. Exposure to the direct sunlight should be avoided.
Value Offered
Note : Controlled pH of product helps to reduce alum/PAC consumption for adjusting the required acidic pH. R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
"CON-TROL" Powder Size 1800, an efficient product for internal sizing of various grades of paper in acidic pH condition. It is fortified rosin in Powder form with nearly 90 percent active ingredient. A product forms aluminum -resinate when it comes in contact with aluminum joins derived from the dissociation of alum / PAC used for adjusting the required acidic pH of the pulp slurry. This aluminum -resinate gets adsorbed on the surface of fibers and imparts water repellency to the formed paper. It also improve & enhance the hydrophobic property of the resultant paper.
Properties
Application : "CON-TROL" Powder Size 1800 should be diluted in water at a temperature of 40 to 50 degree centigrade before adding to Pulp Stock. The diluted fortified rosin size should be added to the pulp slurry followed by alum solution / PAC for proper mixing and uniform distribution. It is recommended to optimize the dose level of product for the requirements depending upon furnish, mill's, operating conditions, final product etc. It is suggested to use a suitable metering pump for dosing a product to get optimum results. Normally consumption level is between 6.0 to 8.0 kgs per ton of pulp. However the consumption may vary depending on the various operating conditions of the individual mills and the final cob value maintained by individual mill.
Shelf Life : Recommended for use of product within 6 months. The product preferably to be stored in M.S., HDPE, and Polypropylene etc. made properly closed suitable containers. Exposure to the direct sunlight should be avoided.
Values Offered
Note : Controlled pH of product helps to reduce alum/PAC consumption for adjusting the required acidic pH. R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
"CON-TROL"© 1512 improves various strength properties and printability of craft paper & board. The Product gets absorbed into the fibers because of its cationic charge. Elevated temperature makes the inter-fiber bonding less susceptible to hydrolysis. It also ensures retention of fillers and color pigments at any pH range leading to better opacity. It also improves retention of synthetic sizing agents based on alkyldiketone.
Properties
Application : CON-TROL 1512© can be added directly in the mixing chest @ 2 TO 5 KG per ton of pulp. For best results we recommend that the chemical should be injected with metering pump by diluting in the ratio of 1:5 just prior to the head box of the paper machine (stock pump, selectifier). Dilution ensures good distribution in the stock and thus maximizes performance. When it is used only for retention an addition rate of 0.1-0.3% at the head box is recommended.
Shelf Life : The product is assured for a life of 6 months preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
In Rainy & Winter seasons , it is usual for any Paper & Board industry, to undergo chronic problems of dimensional stability. Paper as such considered to be hydrophobic in nature tends to gain atmospheric moisture during such climatic seasons. Such climatic problems are overcome by the use and application of the product "CON-TROL" 2424 'A', The formulation dispenses these occurring problems mainly in rainy and winter season. Under seasonal variation and change of geographical locations, the product is useful in bringing about uniformity and consistency of dimensional stability, add stiffness and plywood. This product is useful in the retention of the various types of dimensional stability of Paper & Board; gets absorbed in the fiber. A unique product with a blend of polyamide amine and poly amine based polymers.
Properties
Application Of Product : "CON-TROL" 2424 'A' , a recommended product for use and application under all form of processes for normal papermaking conditions. As prescribed, the consumption of 0.2 to 0.3% of the resin provides sufficient improvement in bursting and tensile strengths including other dimensional stability of paper & board. The product can be used and applied freely and directly in the mixing chest. Besides this, other process applied can be injected with dosing pump before the head box/pressure screen etc. Use of the excessive consumption of this chemical ensures the properties of wet strength of Paper & Board.
Shelf Life : The product is assured for a life of 6 months preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 kgs
"CON-TROL" 5301, a user friendly product, helps to achieve and obtain ultimate wet strength and retention effect of the paper. It also acts as a adhesion control agent on the Yankee cylinder in the manufacture of tissue papers. The product helps in increasing the opacity. At pH 4 — 8, the formulation is effective resulting to obtaining of optimum wet strength in a neutral or slightly alkaline medium. As the product ensures retention of fillers and coloured pigments, it is suitable for the production of soft /toilet tissue, security paper & laminate base paper.
Properties
Application "CON-TROL" 5301, its use and application is recommended for wet strength treatment of paper under neutral pH range - laminate base paper, tissue paper. The retention of fillers and colour pigments is increased. The product produces a coating on the Yankee cylinder ensuring good creeping of tissue paper. The application is flexible to be metered with an adequate metering pump via on-line dilution with water just prior to the head box of the paper machine (stock pump, selectifier). Whenever full wet strength is required to be delivered, the drying cylinder temperature is to be maintained at a temperature of 110 - 120oC with a curing time of 5-6 weeks
Shelf Life The product is assured for a life of 6 months preferably to be stored in a tightly closed container, in a dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/200 KGS
A unique product with a blend of Epichlorohydrin and poly amine based polymers. It is usual for any Paper & Board industry, to undergo recurring and chronic problems of Fluff/Lint in Paper and also they seek of improved wet strength properties of paper for better printability. Such problems of fluff/lint and wet strength can overcome by the use and application of the product "CON-TROL" 1909. The product is useful for application in bringing about uniformity of results. The addition of this chemical reduces/eliminates fluff/lint in paper & also improves the wet strength properties of paper for better printability.
Properties
Application Of Product"CON-TROL" 1909 , is to be added @ 0.20 to 0.30% (2.00 to 3.00 Kg) per ton of pulp. A recommended product for use and application for normal papermaking conditions. As prescribed, the consumption of 0.20 to 0.30% of the resin provides sufficient improvement in the fluff removal in the paper machine process & also offers improvement in the wet strength properties of the paper;( irrespective of any prevailing state of locations and conditions). The product can be used directly in the mixing chest. It can also be injected with dosing pump before the head box/pressure screen etc. The curing time is of 12-25 hours.
Shelf LifeThe product is assured for a long standing life preferably for storage in the covered area to be kept at distance from heat. Exposure to the direct sunlight has to be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50/100/200 Kgs
Delivery Time : 15 DAYS
Stickies result to loss of productivity, machine down time and immobilization of paper mill. Every papermaker intends to dispense elements of stickies in the process of manufacturing. Such deposits are generated by way of Re-pulping, Deinking of Waste Paper, Broke, Pitch formation in Pulping and changes in Climatic conditions. The product, "CON-TROL" © SC-2001 has been developed to do away and cleanse the sticky material during processing. The product is blended formulation of reentrant, dispersant, solvent and quaternary ammonium compound. It is recommended for use and application in Pulp and Paper Mills. It helps in the cleansing of the machine Wet Felts and flexible to neutral, acidic and alkaline systems.
Properties
Application : "CON-TROL" © SC-2001 a recommended product, ensuring operating efficiency and raising productivity of the paper machine. It upkeeps and cleans Press Felts, Dryers Screens/felts and Dryers cleaner resulting to improvement in the performance of the paper machine. The product makes easier and faster repulping process ensuring uniformity in the dispersion of hot melt and other synthetic adhesives, quicker removal of extraneous materials on deckers and screens. Dosage prescribed for use between 500-600 Gms per Ton of paper subject to furnish and water quality. Optimum results desired the dilution to be in the ratio of 1:2. Additional dosages in Hydro Pulper is recommended to prevent Stickies/ Pitch formation avoiding SLIME growth in the system.
Shelf Life : The product is assured for a long standing life preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note: The product stands ineffective in prevention of stickies generated due to presence of Plastic, Rubber, and Thermocole material. R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, D/P
Delivery Time : 15 DAYS
Sheet breaks occur mainly for sticky elements clogging to press felts, dryer screen and forming fabrics. It results to loss of production. "CON-TROL" SG-2501 is developed to ensure as a release aid when applied on the surface of the rolls. This disperser products keeps away dirt sticking on the surface of Press rolls and Calendar roll. It also acts as a releasing agent in M.G. poster, soft and hard tissue paper manufacturing.
Properties
Application :Product "CON-TROL" SG-2501, its use and application is recommended on the surface of the rolls or on Dryers @ 70 Gms per Mtr2, in dilution, in ratio of 1:1, prior to process. When the chemical is applied on the surface, a thin film is formed which remains effective for at least 24 hours.
Shelf Life The product is assured for a life of 6 months preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 50 Kgs
"CON-TROL" FX 8001 is a High-molar-mass, water soluble polymer for use in the production of paper .industries. The product works as fixing agent for AKD Size at neutral ph conditions of paper sizing process. It also improves first pass retention to some extent during paper making process at wide pH range of 4.0 — 7.5. It performs very well in slow drainage stock like recycled fiber, agro waste and wood free pulp. The product can also be used to reclaim suspended fibers from waste water.
Technical Specifications :
Application "CON-TROL" FS 8001 is a cationic polymer, it binds fines, fillers and also binds organic substances to the paper fibers. It improves drainage on the wire considerably thus makes drying much faster and reduces steam consumption. While using in the treatment of white water it improves save all efficiency thus reduces load on effluent treatment plants. The product is to be used after dilution in concentration 0.1 to 0.5% with water directly in the mixing chest. For the best results it should be dodged with metering pump. The best dodging point varies from machine to machine thus can be determined only after taking trial on the machine. The idle dosages can be determined during plant trials.
Areas Of Applications
Shelf Life & Storage : "CON-TROL" FX 8001 has a shelf life of six months in tightly closed containers at 35° C. The product should be stored in cool dry place in tightly closed containers. Reclaiming Fiber: The product is to added in white water in very low concentration. It is to added in the machine
Values Offered
Additional Information:
Payment Terms : L/C, T/T
"CON-TROL" Bleach 1011 is an reductive bleaching chemical. It is a powered stable compound, which dissolves in water and decomposes gradually to produce sulfoxylic acid to exhibit a reducing action. The reaction is promoted by the application of heat or in the presence of alkali, an a strong reducing action is thereby exhibit.
Properties
Application :"CON-TROL" Bleach 1011 is a substitute for NaC1O bleaching in bleaching of waste wood-free or mechanical paper and as substitute for Sodium Hydrosulfite bleaching in post bleaching (after hydrogen peroxide de-inking/bleaching) It has a property of reacting with oxygen in the air slowly as compared with Sodium Hydrosulfite. Even when a presently used NaC1O bleaching equipment is diverted as it is. Loss due to oxidative decomposition is relatively small and a bleach brightness equal to that attained by NaC1O bleaching can be attained by choosing a suitable using amount of this chemical.
Shelf Life The product is assured for a long standing life preferably to be stored in the covered, dry area, kept at distance from heat. Exposure to the direct sunlight should be avoided.
Values Offered
Note : R&D mandates to improve the product for which any changes are at our discretion without prior intimation.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : 25 Kgs HDPE Woven Sacks
Delivery Time : 30 Days
