Other Products / Services #5466979

• High Capacity Sorbent
• Dimension 5 X 50 / Box
• Absorption Capacity 10.5 Gallons / Box; 31.5 Gallons / Case
• Quantity 3 Boxes / Case
• Perforations at every 16 inches

• High Capacity Sorbent
• Dimension 15.5 X 150 / Roll
• Absorption Capacity 31 Gallons / Case
• Quantity 1 Roll / Case

3M 1100 Series Earplugs feature soft, hypoallergenic foam and a tapered design to fit comfortably in the earcanal.

• Soft, hypo-allergenic polyurethane foam offers maximum wearer comfort.
• Smooth, dirt-resistant surface.
• Tapered design fits most ear canals.
• Available corded or uncorded.
• Probed Test Plug version available.

This ear plug is lightweight, comfortable and easy-to-use for workers in a wide variety of industrial and commercial applications. Recommended for moderate noise (up to 95 dBA TWA).

Use with 3M Filters 2000 Series, 3M Cartridges 6000 Series, 3M Cartridges and Filters 7000 Series and powered and supplied air systems against a variety of gases, vapors and particulates according to NIOSH approvals.

• Lightweight
• Flexible system (gas/ vapour and / or particulate filters plus Supplied-Air option)
• Soft, pliable hypo-allergenic, facepiece material
• Easy to use.
• Dual filter design reduces breathing resistance and improves weight distribution for greater comfort.
• Large, polycarbonate lens
• Large, polycarbonate lens
• Double face sealing gasket ensures a better fit
• Speech diaphragm improves communication

Scotch Electrical Moisture Sealant 06147 is a self-fusing, rubber-based thin insulating mastic compound laminated to a flexible, all-weather grade PVC backing and are designed for moisture sealing of electrical connections up to 600 volts.

• 2 1/2 in x 10 ft
• Self-fusing, rubber-based thin insulating mastic compound laminated to a flexible, all-weather grade PVC backing
• Designed for moisture sealing of electrical connections up to 600 volts
• Excellent resistance to abrasion, moisture, alkalies, acid copper corrosion and varying weather conditions
• Applications: seal out moisture and insulate low voltage connections, pad and insulate bolted connections, insulate service drops, insulate lighting connections, protect grounding rod connections, and end seal cables

This fine-textured, slip-resistant material helps provide enhanced safety and comfort in light traffic barefoot areas.

• For wet, barefoot-traffic areas
• Non-mineral, fine-textured, slip-resistant vinyl surface
• High performance, water-resistant, acrylate adhesive is ideal for wet conditions
• Applications: showers, tubs, surfboards, around hot tubs and pools
• Treads: 6 in. x 24 in.
• Tapes: a varietey of widths from 1 in. to 12 in. wide x 60 ft. long
• Custom shapes and sizes are available

SYSKA LED lights are a smart innovation in the future of lighting. Advanced technology, energy efficiency and durability put SYSKA LED lights years ahead, giving it a clear edge in todays market. Every LED Lights made by SYSKA LED is crafted to meet global standards. SYSKA LED lights are superior quality lights products, priced fairly, and offer 2 years warranty.

White board film or a writing surface film for offices, conference hall, lecture hall. It is an revolutionary product comes in the form of film with adhesive at the back to stick over any kind of surface like concrete, aluminum, glass and plastic.

Once installed company guarantees minimum life of 10 years if used under prescribed conditions.

The white board film can also be used as projector board or projector curtain for lectures and seminars.

• Glossy white polyester films with whiteboard capabilities
• Texts and drawing, written with waterbased whiteboard marker can be easily removed
• High gloss surface allows smooth writing
• Can be installed over any flat surface available in custom made sizes
• Comes with 12 years warranty

3M makeTubularDaylightDevicefor Factory / Warehouses establishments. These are being widely installed in many reputed companies for lighting up spaces and energy conservation by harnessing Sun light.

The productTubularDaylightDeviceis an 3M innovation using highly reflective films and crystallized glasses, it harnesses and captures sunlight above the roof, and reflects it towork-spaceminus heat.

It is excellent energy saving product andzeroes down the cost of electricityto light the surroundingright from morning to evening.

Below are some salient features and merits of the product

• Effective for Factory / Warehouses establishments
• Zeros down the cost of electricity for daylight lighting
• Works on Collection, Transmission and Diffusion method
• 100% green; eligible in LEED points
• Compatible to any roof top
• One light generates approx1100 watts of energyandcovers 450 sqft area.
• Cost effective andmaximum 3 years payback periodincluding interest overinvestment
• Company guarantees more than 15 years of working efficiency
• No Mechanical/ electrical parts usedZERO maintenanceNO loss in efficiencywith time
• No electricity required to run it
• Outside light reflected inside with7% efficiencyusing radial lenses and 3M patent films
• Sunlight heat is reflected outsideonly with use of anti Infrared and UV glass
• Tax Benefit Avail80% Depreciation benefit in first yearover installation

3M Scotchlok Fuse Holders are used to install a blade-type automotive fuse between power source and device.

3M Heat Shrink low voltage joints are available for armoured/ unarmoured low voltage single core and multi core power cables.

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

Features:

• Available for 1-Core(1C), 3-Core(3C), 3.5-Core(3.5C) and 4-Core(4C) power cables
• Provides excellent environmental protection and moisture sealing
• Wide conductor size ranges upto 500 mm2

3M Heat Shrink medium voltage joints are available for tape/wire shielded, armoured/ unarmoured medium voltage single core and three core polymeric cables. 3M Heat Shrinkable joint utilizes a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The stress control tube together with the insulating and dual walled (inside insulating & outside semiconducting) tubes forms the splice body.

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.All the grounding connections are solder-less.

Features:

• Available for 1-Core and 3-Core polymeric cables
• Provides excellent environmental protection and moisture sealing
• Wide conductor size ranges upto 1000 mm2

Dry Termination TD-II Family for up to 123kV Applications

• One-piece dry termination, for indoor or outdoor installations

Features:

• Light weight
• Dry design does not require liquid dielectric
• Can be installed at any angle or inverted
• No special maintenance required
• Top and bottom sealing system based on proven cold shrink technology
• Alternating sheds (skirts)
• One-piece factory-tested push-on termination body

Application:

• Conductor size up to 800 mm2
• Meets class 3 (heavy pollution) requirements
• Not self-supporting, requires holding structure

3M Oil Sorbents are an innovative range of highly absorbent, quality products. Being hydrophobic, (repels water) they are ideal for absorbing oil from areas where water may also be present exterior locations for example. 3M oil sorbents will not disintegrate or sink, even when saturated with oil, and are very easy to dispose of.

• Molykote D-321R Anti-Friction Coating

Dry Paint Lubricant for Tap Changing Gears; Solenoid Plungers; Stamping / Punching Dies, Rack-n-Pinion, Circuit Breaker Cylinder Sliding Pieces

• Molykote 3402-C LF Anti-Friction Coating

Air Cure, Dry Film, Works over high load and avoids Wear and Tear of bearing

• Molykote L-0500 Zinc Coating

Re-galvanising of Damaged Galvanised Surfaces, Welding Points, Drilling Points, Reworked Surfaces etc.

• Molykote D-7409 Anti-Friction Coating

Heat-curing dry film, durable, resistant to greases and solvents

• Molykote 106 Anti Friction Coating

Dry lubricant, metal to metal application, anti seize application for hinges, gear, engine, locks etc

• Molykote Metal Protector Plus

Corrosion Protection of Machined Parts for Long Storage / Export

• Molykote D-3484 Anti-Friction Coating

Coating on Electrical Contacts in MCB, metal to metal sliding coating, toothed gears, car boot lock parts

• Molykote 3400A Anti Friction Coating

Spiral Spring Coating, Turbocharger Sliding Block, sleeve bearings, locks and switches, fasteners

• Dow Corning 1-2577 Conformal Coating

Sealant for Ceramic Bottles and Flange Joints in Vacuum Interrupters, electronic printed wiring board, tough to abrasion

• Molykote P 40 Metal Free Adhesive Lubricating Paste

Anti-seize for Fasteners for Motors, Bushings, etc., with Better Corrosion Resistance also used in automobile application for brake system, open gears, plain bearings, guide bolts

• Molykote P-40 Metal Free Assembly Paste

Long Life Lubricant with Good Corrosion Protection for Mechanisms; Rarely Operating Relays

• Molykote PG 21 Grease

Water resistant high performance grease for plastic to plastic and plastic to metal contacts, used in Plastic Coated Pivots in Cut-outs (Hager), water pumps, domestic appliances, toys and electrical application

Dow Corning products are best suited for food and beverage industries. The lubricants and sealants are manufactured under the stringent guidelines of U.S. Department of Agriculture and are well certified under the various regulations of H1, H2, and NSF.

Dow Corning manufactures the products from Freezer to Oven level of application or application for below -226 deg C to more than 1400 degree C.

• Increase the time duration of change of lubricant and hence reduces down time
• Reduces labor cost and time of scheduled and unscheduled maintenance
• Increases life of compressor and pumps
• Food grade lubricants and sealants help maintain the HACCP guidelines

Molykote has engineered a compound for hardware to solve double purpose of maintaining friction less movement and block the leakage from taps. It is FDA approve food grade grease and hence is safe to use in bathrooms faucets, like water taps, showers knobs etc.

• Compatible with ceramic discs, rubber gaskets, plastic components
• Excellent water resistance for longer cartridge lifetime
• Improved coefficient of friction for easier lever movement
• Improved tackiness/adhesion so grease stays in place at lubrication point
• Good load-carrying capacity
• Wide service temperature range (-40 to 200 C)
• Just one grease to stock instead of two grades (prevent wear and corrosion plus resist water spray-off.)
• Meets requirements of DIN EN 817
• Meets several global standards for drinking water contact
• Complies with UBA guidelines for the hygienic assessment of lubricants with drinking water contact
• Complies with the requirements of the Water Regulation Advisory Scheme (BS6920:2000)
• Meets NSF/ANSI 61 Standard

Dow Corning manufactures Molykote Brand Greases and lubricants for a wide variety of application for lubricating any kind of moving parts, greases for bearings. anti seize pastes for high temperature joints so that nut-bolts may not join permanently.

Dow Corning serves to all kind of industries some of them are home appliances, power industry, automobiles, electrical and electronics etc.

Many food grade greases are also manufactured for several critical applications where human contact and accidental consumption may happen.

• Molykote M-77 Solid Lubricant Paste

for high temperature lubrication upto 400 deg centigrade, load carrying capacity and good life, majorly application brake anchor plate, piston assembly, disk brake

• Molykote 1000 Solid Lubricant Paste

High Temperature Anti Seize Paste for non-destructive dismantling of threaded fasteners, services in high temperature and load

• Molykote Dx Paste

High load sliding and friction contacts used in textile, home appliances and industrial machineries

• Molykote G-n Metal Assembly Paste and Spray

Lubrication paste and spray for threaded joints, press fit assembly prevents corrosion and welding

• Molykote P-37 Paste

Major application in Power plant turbines in threaded connections, approved by steam valve joints manufacturers, works upto 1400 degree centigrade

• Molykote D Paste

General Purpose white solid paste used for domestic electrical appliances, food and beverages and industrial machineries

• RTV 789 Dow Corning 789 Silicone Weatherproofing Sealant

Weatherproof sealant for control joints, curtain wall mullion joints, parapel wall joints.

• RTV 991 Dow Corning 991 Silicone High Performance Sealant

UV resistant, weatherproof sealant for sensitive glass, metals and natural stones

• RTV 795 Dow Corning 795 Silicone Building Sealant

Neutral Cure sealant used in structural and non structural applications, weatherproofing solution for painted metal, steel, glass, aluminium, granite concrete or bricks etc.

• Dow Corning Fire Stop 700 Silicone Sealant

Meets BS 476 part 22 standard, neutral cure and halogen free silicon sealant, conforms to ISO 11600-F&G-25LM. Used for sealant of joints to stop penetration of fire, through holes and pipes. Major application includes fire proof sealing faced walls, partition walls, curtain walls

• RTV 995 Dow Corning 995 Silicone Structural Glazing Sealant

High tensile strength for protective glazing application, works over painted, enameled or coated surfaces as well

• RTV 983 Dow Corning 983 Structural Glazing Sealant
• RTV 982 Dow Corning 982 Silicone Insulating Glass Sealant
• RTV 791 Dow Corning 791 Silicone Weatherproofing Sealant
• RTV 991 Dow Corning 991 Silicone High Performance Sealant
• RTV 688 Dow Corning 688 Silicone Glazing & Cladding Sealant