Other Products / Services #1089860

Situated in Kolkata West Bengal in India RMco offers HORN GAP FUSE Two post insulator per phase complete with G I channel complete set.

R M CO, a Kolkata West Bengal in India Based Company is Manufacturers of Overhead Hightension Line Materials Such as G O A B Switch ( Rotating Type), Horn Gap Guse, Discharge Rod, Fues Barrel with matal parts, Goab Switch Titling Type, Goab Switch Rotating Type, Drop Out Fues( Bracket Type), Drop out Fues( Chanel Type), Line Discharge RodEarthing Rod.

R M CO, a Kolkata West Bengal in India Based Company is Manufacturers of Industrial Reverse Osmosis Plants(R.O.Plants).Industrial Reverse Osmosis Plants(R.O.Plants) accoring to the need for tap water and large volume of water application. The Production range starts from 100 lite per hour to maximum limit to 45000 per hour.

All "RMCO" Brand Industrial Reverse Osmosis Plants(R.O.Plants) are carefully customised and configured to suit the individual requirment of the output water, which varies from normal drinking application to the specific usage.

Reverse Osmosis has gaoned wide acceptance and populanity due to its simple operation and the ability to withstand variations feed water quality.

R M CO, a Kolkata West Bengal in India Based Company is Manufacturers of Overhead Hightension Line Materials Such as G O A B Switch ( Rotating Type), Horn Gap Guse, Discharge Rod, Fues Barrel with matal parts, Goab Switch Titling Type, Goab Switch Rotating Type, Drop Out Fues( Bracket Type), Drop out Fues( Chanel Type), Line Discharge RodEarthing Rod.

Situated in Kolkata West Bengal in India RMco offers Gang Operated Air Break Switch Tilting Type Complete with square shaft, operating pipe, handle, guide clamp.The switch is designed to suit overhear systems used in high density urban situations or high load centers, where the load is much higher and the need of improved and steady quality supply is much greater. Main function of this product is to isolate the Transformer, Overhead lines, System or Cables from distribution network.

R M CO, a Kolkata West Bengph in India Based Company is Manufacturers of the Pressure Clarifier. When the source of water generally happens to be river / pond / jheel (called as ground source)and the suspended impurities of water are to be eliminated for passing through a pressure filter, the filtration unit will be chocked immediately, if highly turbid water is passing through it. The technical approach to such a treatment usually involves coagulations, pH corrections, flash mixing, flocculation, clarification etc. and the PRESSURE CLARIFIER is left for only choice.

The Pressure Clarifier, as the name implies, works under Pressure and as such influent water can be directly passed through the unit and subsequently through a filter for obtaining the treated water at an overhead tank, by single pump pressure only.

Design and Fabrication

The pressure clarifier units are designed, fabricate from welded mild steel plates suitable for withstanding working pressure. The fabrication is generally as per our schedule practice. The size and capacity of the pressure clarifier depend upon customers requirement of treated water.

Situated in Kolkata West Bengal in India RMco offers HORN GAP FUSE Two post insulator per phase complete with G I channel complete set.

Manufacturer, Exporter and Supplier in Kolkata, West Bengal. Pressure Clarifier, offered by us, combines the system of flash mixing, flocculation and dynamic settling process. Raw water, dosed with coagulant, enters into the central flocculation zone, from the bottom of the Pressure Clarifier. Specially designed ejector is provided at the bottom of the clarifier for sucking the performed sludge and mixing it with the influent water, so that large and heavy flocks are formed, when the water flows through clarification zone. The water subsequently enters into the clarification zone, through the ports located at the bottom of the flocculation column. From the ports the water reverses its direction and flows upwards while the flocks formed with the suspended impurities of the water lag behind with distinct settling tendency. A perforated ring is provided on the top of the clarification zone to collect the treated water uniformly throughout the cross sectional area of the Pressure Clarifier. A sludge discharge valve is available at the bottom of the unit for the removal of sludge at period of intervals. Sampling points are also available at different heights of the unit to check-up the clarification process at different levels.

The inlet line of the equipment is provided with coagulant chemical dosing accessories and the outlet line is connected in series with pressure filtration unit. The treated water so obtained is suitable for portable supply, industrial use and for further processing like or demineralization by ion exchange technique.

Advantages Of Our Pressure Clarifier
The advantage of our system of water treatment are

Quick installation : Elaborate civil work is completely avoided. Only to build up a foundation for the pressure clarifier, which is a package type plant, is just put on it.

Pressure factor : The pressure clarifier, as the name implies, works under pressure and as such influent water can be directly passed through the unit and subsequently through a filter for obtaining the treated water at an overhead tank, by single pump pressure only.

Cost factor : For a moderate installation, the overall cost of the pressure clarifier including foundation for it, is significantly lesser than that of clariflocculator/settling tank with civil work.

Load factor : Our Pressure Clarifier, usually, takes maximum turbidity load of 2000 ppm by silica scale. The limit, however, varies slightly with the nature of suspended impurities present in the influent water.

Design and Fabrication Of Our Pressure Clarifier
The Pressure Clarifier units are designed, fabricated, assembled and tested at our works. The units are made from welded mild steel plates suitable for with standing working pressure. The fabrication is generally as per our schedule practice. The size and capacity of the Pressure Clarifier depends upon customers requirement of treated water.

The Question Of Quality
Water is a driving force for life and civilization, but dirty water is accepted by none. Obviously, the task of proceeding clean water has been a matter of top priority at all time. We take up the task and extend the benefit to any users of water. Whenever the quality of water is the question, we offer to answer it through our engineering expertise with many years experience.

The question Of Choice
For the large water supply schemes, the source of water generally happens to be river and the suspended purities of water are to be eliminated at the first step of treatment to render the water suitable for passing through filter. A filtration unit is chocked in no time if highly turbid water is tried with it. The technical approach to such a treatment usually involves coagulations, pH corrections, flash mixing, flocculation, clarification, etc. Thus, clariflocculators/flocculators and settling tanks are equipped whenever demand for treated water is over 0.5 million gallons per day.

But in the case of treating moderate volumes of water, the installation of clariflocculator or flocculator and settling tank has been found to uneconomic and the P Pressure Clarifier is left for only choice.