Technical specifications
maximum sheet width that can be formed : 1550mm
maximum sheet thickness in crca strips that can be formed : 1 mm
horizontal distance between shafts : 400mm
number of forming stations : 12 nos
vertical station : 11 nos
total hp for line : 13
speed of the machine : 7 mt.minute
size of machine : 6500 x 1100 x 1100 mm
mandrel uncoiler
coil weight : 2 mt max
coil width : 1200 mm
coil bore : 450 mm min, 510 mm max dia.
mandrel movement : manually adjusted
back tension : manually adjusted
entry gate
entry gate will be provided for movement of sheet to roll former.
Main base
the main base is ms fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (station)
the stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
the roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
the drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 hp motor
tooling

Technical specifications
maximum sheet width that can be formed : 1550mm
maximum sheet thickness in crca strips that can be formed : 1 mm
horizontal distance between shafts : 400mm
number of forming stations : 12 nos
vertical station : 11 nos
total hp for line : 13
speed of the machine : 7 mt.minute
size of machine : 6500 x 1100 x 1100 mm
mandrel uncoiler
coil weight : 2 mt max
coil width : 1200 mm
coil bore : 450 mm min, 510 mm max dia.
mandrel movement : manually adjusted
back tension : manually adjusted
entry gate
entry gate will be provided for movement of sheet to roll former.
Main base
the main base is ms fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (station)
the stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
the roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
the drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 hp motor
tooling