• TypePebble Stone
• ColorWhite

It is used in water treatment, effluent water treatment, waste water treatment & Construction industries.

• TypeVolatile Distillate Oil
• StyleLiquid
• ApplicationFuel Oil
• PressureLow
• StructureNatural
• Warranty12 Months
• Purity99%
• Viscosity Minimum3.1 mm2/g
• Viscosity Maximum6.3 mm2/g

Applications : Steel rolling mills Rotary furnaces Power plant factory Glass factory Cement factory Ceramic factory Aluminium factory Boiler factory Central heating factory Painting factory Features & Benefits : Preheating Not Required Low Sulphur Content Low Density Better Heat Transfer Efficiency Higher Calorific Value

• Brand NameQuartz Silica
• Materialstones,crystals,powder
• ShapeDifferent sizes
• ApplicationRefer application
• SiO2 Content (%)99.8
• MgO Content (%)Nil
• GradeDifferent grades
• Classification16-30,8-16

we having our own mines in india. We can also produce all sizes of quartz as per buyer requirement. quartz (silica): as a crystal, quartz is used as a semiprecious gem stone. Cryptocrystalline forms may also be gem stones: agate, jasper, onyx, carnelian, chalcedony, etc. Crystalline gem varieties include amethyst, citrine, rose quartz, smoky quartz, etc. Because of its piezoelectric properties quartz is used for pressure gauges, oscillators, resonators, and wave stabilizers; because of its ability to rotate the plane of polarization of light and its transparency in ultraviolet rays it is used in heat-ray lamps, prism, and spectrographic lenses. Used in the manufacture of glass, paints, abrasives, refractories, and precision instruments. silica has many industrial applications in abrasives and polishes, in glass manufacture, fillers and extenders, silica brick manufacture, as a catalyst, in speciality coatings, cleansers, ceramics, electronics, optics and refractories, in ferro-silicon manufacture, rubber, and as a frac sand. Processing of silica of specific quality yields several types of speciality silicas. These include colloidal, fumed, fused, high purity ground, silica gel, and precipitated silica. Colloidal silica is mainly used as a high temperature binder for silicon wafer polishing and carbonless paper. specification of quartz: loss on ignition : 0.10 % silica as sio2 : 99.8 % aluminium oxide as al2o3 : nil iron oxide as fe2o3 : 0.0005 % cacium oxide as cao : nil magnesium oxide as mgo : nil titanium dioxide as tio2 : nil manganese oxide as mno : nil sodium oxide as na2o : 0.0011 % potassium oxide as k2o : 0.0010 % electrical conductivity : 8 main applications: glass jewelry ceramic paints abrasives refractories

• MOQ 500 Kilogram
• TypeLow Aromatic White Spirit
• StateLiquid
• ApplicationAppliance Paint, Car Paint, Coating Paint

  Mineral spirits are a type of chemical substance that is a liquid hydrocarbon solvent mixture of aliphatic and alicyclic petroleum-based compounds. Mineral spirits are used as a key ingredient in paint and varnish products used to coat metal surfaces to prevent corrosion.   Mineral spirits are formed by the molecular interaction via distillation of paraffin (aliphatic) and cyclo-propane (alicyclic) with aromatic compounds. Mineral spirits are used in primarily three common types - type I, II and III. Type II is the most commonly used in corrosion preventative applications. It has been treated to remove aromatic solvents, making it ideal for manufacturing oil-based paint and thinners. Mineral spirits are also grouped in three classes. Class 1 is characterized by a high flashpoint with a low volatility rating. Class 2 is characterized by a lower flashpoint temperature. Class 3 has the highest volatility with the lowest flashpoint of the three classes. Pure mineral spirits are used for stripping paint and other substances. At these concentrations, they are highly corrosive and should be used carefully.

• Purity99%
• Ash Mass0.02% Max
• Ash ContentMax 0.02 %
• Kinematic Viscosity1.8 to 5.0 cSt at 40 Deg C
• Pour Point12 Deg C For Winter And 21 Degree Celsius For Summer
• Flash Point45 to 70
• Water ContentMax. 0.25%
• SulphurMax. 1.8%

Applications : Steel rolling mills Rotary furnaces Power plant factory Glass factory Cement factory Ceramic factory Aluminium factory Boiler factory Central heating factory Painting factory Features & Benefits : Preheating Not Required Low Sulphur Content Low Density Better Heat Transfer Efficiency Higher Calorific Value

• TypePebble Stone
• ColorWhite

It is used in water treatment, effluent water treatment, waste water treatment & Construction industries.

• TypeVolatile Distillate Oil
• StyleLiquid
• ApplicationFuel Oil
• PressureLow
• StructureNatural
• Warranty12 Months
• Purity99%
• Viscosity Minimum3.1 mm2/g
• Viscosity Maximum6.3 mm2/g

Applications : Steel rolling mills Rotary furnaces Power plant factory Glass factory Cement factory Ceramic factory Aluminium factory Boiler factory Central heating factory Painting factory Features & Benefits : Preheating Not Required Low Sulphur Content Low Density Better Heat Transfer Efficiency Higher Calorific Value

• Brand NameQuartz Silica
• Materialstones,crystals,powder
• ShapeDifferent sizes
• ApplicationRefer application
• SiO2 Content (%)99.8
• MgO Content (%)Nil
• GradeDifferent grades
• Classification16-30,8-16

we having our own mines in india. We can also produce all sizes of quartz as per buyer requirement. quartz (silica): as a crystal, quartz is used as a semiprecious gem stone. Cryptocrystalline forms may also be gem stones: agate, jasper, onyx, carnelian, chalcedony, etc. Crystalline gem varieties include amethyst, citrine, rose quartz, smoky quartz, etc. Because of its piezoelectric properties quartz is used for pressure gauges, oscillators, resonators, and wave stabilizers; because of its ability to rotate the plane of polarization of light and its transparency in ultraviolet rays it is used in heat-ray lamps, prism, and spectrographic lenses. Used in the manufacture of glass, paints, abrasives, refractories, and precision instruments. silica has many industrial applications in abrasives and polishes, in glass manufacture, fillers and extenders, silica brick manufacture, as a catalyst, in speciality coatings, cleansers, ceramics, electronics, optics and refractories, in ferro-silicon manufacture, rubber, and as a frac sand. Processing of silica of specific quality yields several types of speciality silicas. These include colloidal, fumed, fused, high purity ground, silica gel, and precipitated silica. Colloidal silica is mainly used as a high temperature binder for silicon wafer polishing and carbonless paper. specification of quartz: loss on ignition : 0.10 % silica as sio2 : 99.8 % aluminium oxide as al2o3 : nil iron oxide as fe2o3 : 0.0005 % cacium oxide as cao : nil magnesium oxide as mgo : nil titanium dioxide as tio2 : nil manganese oxide as mno : nil sodium oxide as na2o : 0.0011 % potassium oxide as k2o : 0.0010 % electrical conductivity : 8 main applications: glass jewelry ceramic paints abrasives refractories

• MOQ 500 Kilogram
• TypeLow Aromatic White Spirit
• StateLiquid
• ApplicationAppliance Paint, Car Paint, Coating Paint

  Mineral spirits are a type of chemical substance that is a liquid hydrocarbon solvent mixture of aliphatic and alicyclic petroleum-based compounds. Mineral spirits are used as a key ingredient in paint and varnish products used to coat metal surfaces to prevent corrosion.   Mineral spirits are formed by the molecular interaction via distillation of paraffin (aliphatic) and cyclo-propane (alicyclic) with aromatic compounds. Mineral spirits are used in primarily three common types - type I, II and III. Type II is the most commonly used in corrosion preventative applications. It has been treated to remove aromatic solvents, making it ideal for manufacturing oil-based paint and thinners. Mineral spirits are also grouped in three classes. Class 1 is characterized by a high flashpoint with a low volatility rating. Class 2 is characterized by a lower flashpoint temperature. Class 3 has the highest volatility with the lowest flashpoint of the three classes. Pure mineral spirits are used for stripping paint and other substances. At these concentrations, they are highly corrosive and should be used carefully.

• Purity99%
• Ash Mass0.02% Max
• Ash ContentMax 0.02 %
• Kinematic Viscosity1.8 to 5.0 cSt at 40 Deg C
• Pour Point12 Deg C For Winter And 21 Degree Celsius For Summer
• Flash Point45 to 70
• Water ContentMax. 0.25%
• SulphurMax. 1.8%

Applications : Steel rolling mills Rotary furnaces Power plant factory Glass factory Cement factory Ceramic factory Aluminium factory Boiler factory Central heating factory Painting factory Features & Benefits : Preheating Not Required Low Sulphur Content Low Density Better Heat Transfer Efficiency Higher Calorific Value