Ric Oil

Moscow, Moscow region, Russian Federation

• MOQ 300 Metric Ton

We are offering jet fuel.jet a-1 jet a flash point 38 °c (100 °f) autoignition temperature 245 °c (473 °f)[10] freezing point −47 °c (−53 °f) −40 °c (−40 °f) max adiabatic burn temperature 2, 500 k (2, 230 °c)(4, 040 °f) [11] [12] [13] density at 15 °c (59 °f) .804 kgl (6.71 lbus gal) .820 kgl (6.84 lbus gal) specific energy 43.15 mjkg 43.02 mjkg energy density 34.7 mjl 35.3 mjl.

• MOQ 300 Metric Ton
• brownlight brown

We are offering d2 diesel. Quality of gas oil l-0.2-62 shall meet gost 305-82 including but not limited to the below stated specification: 1.cetane number, min 45 2.distillation, deg. C - 50% max - 96% (final boiling point), max 280 360 3.cinematic viscosity at 20 deg. C, mm2c, (cst)3.0-6.0 4.total sulphur, %wt, max 0.2 5.mercaptan sulphur, %, max 0.01 6.hydrogen sulphur abs 7.copper strip test passes 8.water-soluble acids and alkalis abs 9.actual gum content, mg100cm3, max 40 10.acidity, mg100cm3 of gas oil, max. 5 11. Lodine numbers, g100g, max. 6 12.ash, %, max 0.01 13.cokability of 10% residue, max. % 0.20 14. Filtration coefficient, max 3 15.sediments abs 16.water abs 17.density at 20 deg. C, kgm3, max. 860 18.flash point (closed cup), deg. C, min 2 19.pour point from march to october (summer), deg. C, max.-5 20. Pour point from november to february (winter), deg. C, max. -10 21.cloud point from march to october (summer), deg. C, max. 0 22.cloud point from november to february (winter), deg. C, max.-5 (*) summer from march to october - (pp- 5.0 deg c) - (cp- 0.0 deg c) winter from november to february - (pp- 10.0 deg c) - (cp- 5.0 deg c)

• MOQ 300 Metric Ton
• Blacketc

We are offering mazut. Specification of heavy fuel oil mazut m100 gost 1058575 component result 1. Ash content, not more % 0.14 2. Mass fraction of sulphur, not more % 0.5 - low - sulphur - residual – oil 3. Temperature of the flash, not less °c in the closed crucible in the open crucible °c 110mm 4. The temperature of solidification, not hiaher °c 25 5. Kinematics viscosity at 50°c 118 max 6. Water content 0.5% 7. Mechanical impurities lower than 0.1 % 8. Aciditv lower than 5ma kohlooml 9. Alkalinitv nil 10. Gross calorific value kcalkq I kjka min920041 300 11. Density at 15.0 deg c (ºc) kall 0.890-0.9200 12. Hvdrogen sulfide content (h25) oom 0.5 max 13. Carbon residua lower than 7% 14. Vanadium (v) ppm 30 max 15. Aluminium (ai) ppm 5 16. Silikon (si) ppm 12 17. Nickel lni} ddm 29 18. Asphaltenes mm 3.6% 19. Destilation @4 mm ha extracted to 760 mm ha initial boilina point deg c (ºc) 216 5% recovered deg c (ºc) 259 10% recovered deo. C 310 20% recovered deg c (ºc) 358 30% recovered deg c (ºc) 445 40% recovered deg c (ºc) 502 50% recovered deg c (ºc) 534 60% recovered deg c (ºc) 538 75% recovered deg c (ºc) 545 80% recovered deg c (ºc) - 90% recovered deg c (ºc) - final boiling point deg c (ºc) 550 percent recovered vol 78% residue vol 22% total nitrogen mm 0.192% sodium (na) ppm 15 pantone 497

• MOQ 300 Metric Ton

We are offering lpg. Specification of russian lpg (mix 50%c3 - 50%c4) propane (c3) test unit design actual ethane mole% 0.470 summer 0.509 winter propane mole% 98.1 summer 98.17 winter pentanes plus mole% 0.01 maximum copper strip no.1 a maximum volatile sulphur ppm 30 maximum moisture content ppm 10 maximum vapor pressure psio 200 maximum h2s ppm 5 maximum butane (c4) test unit design actual ethane mole% 0.08 propane mole% 0.95 total c4 mole% 98.3 total c3 mole% 0.75 copper corrosion 1 hour at 100 no.1 a maximum total sulphur ppm 30 maximum h2s ppm nil vapor pressure psio 70 maximum moisture content ppm 10 maximum residue ppm 0.05 maximum s.g. 0.5778 r.v.p. 88.5 psi summer from march to october (pp – 5.0 0c) summer from march to october (cp – 0.0 0c) winter from november to february (pp – 10.0 0c) winter from november to february (cp – 5.0 0c)

• MOQ 300 Barrel(s)

We are offering jp54 fuel. Specifications of jp54 russian origins property test name units min max specific acid number d 3242 acidity in turb fuel mg kohg 0.10 additives - conductivity conductivity improver additives - general note general note appearance visual clear & br aromatics d 1319 hydrocarbon typ by fia vol% 25 copper strip corrosion d 130 cu str 2 hr @ 212 f rating 1b density @ 15 c d 1298 dens, sp gr, api by hyd kgm3 775 840 dist 10 vol% rec, corr d 86 dist at atm press deg f 401 dist 50 vol% rec, corr d 86 dist at atm press deg f report dist 90 vol% rec, corr d 86 dist at atm press deg f report dist end pt, corr d 86 dist at atm press deg f 572 dist loss, corr d 86 dist at atm press vol% 1.5 dist residue d 86 dist at atm press vol% 1.5 existent gum d 381 gum content by jet evap mg100ml 7 flash pt d 56 flash pt by tcc deg f 100 freeze pt d 5972 freeze pt by ph tech deg c -40 jftot press drop d 3241 jftot@ 260 c mm hg 25 jftot tube rating d 3241 jftot@ 260 c rating

• MOQ 300 Metric Ton

We are offering fuel oil. Specifications of fuel oil cst-180 № characteristics specifications 1---- acidity (inorganic) mgkoh gm max nil 2---- ash percentage by weight max. 0.1 3---- flash point (pmcc) c min 66 4---- pour point c. Max 18 5---- kinematics’ viscosity at 50 c cst max 180 6---- sulphur pet wt.max (quartz tube) 3.5 7---- carbon residue raw bottom pet max 15 8---- water pet. Vol. Max 1.0 9---- total sediment potent by pet max. 0.10 10---- density @ 15 c max 0.990 11---- gross calorific value kcal kg (min.) 10100 12---- c.c.a.i. 850 13---- vanadium pot by wt. Mg kg max. 350 14---- sodium pot by wt mgkg max 50 15---- asphaltense pot by wt.max 14 16 aluminium mgkg max 3

• MOQ 300 Metric Ton
• Base Oil SN 60,100,150,500,Bs 150Light color

We are offering base oil . Characteristic 150 150-a 300 500 650 bright stock test method astm kinematic viscosity @ 100 °c , cst @ 40 °c , cst 5.5 38 6.5 45 7.3 53 10.5 101 14≈13.5 30 511 d-445 viscosity index (vi) 100 90 95 95 85 90 d-2270 flash point, °c 198 195 220 240 260 252 d-92 pour point, °c -9 -3 -6 -6 6- -6 d-97 specific gravity @ 15. 6°c 15. 6°c 0.872 0.890 0.875 0.880 0.902 d-4052 sulphur content , (wt%) 0.2 ---- 0.3 0.4 0.64 d-2622 color 0.5 2.5 1 1.5 2 2 d-1500 tan , mg kohg

• MOQ 300 Kilogram
• Granularprilled
• Light brownwhite

We are offering urea fertilizers. Specifications: urea prilled ##quality: standard export quality prilled ##nitrogen : 46% by weight min ##moisture : 0.5% max fisper 0.3%max dryer ##biuret : 1% max by weight ##anti-caking agent :treated against anti-caking ##free ammonia : 160 pxt, ppm. Max. ##prill : 95% max ##granulation : 1-4 mm 90% ##lesser than 2 mm : 1% ##greater than 3 mm : 4% ##melting point : 132 degrees c ##colour : standard white or pure white ##purity: free from harmful substances. ##radiation : certified non-radioactive. ##consistency : 100% free flowing, non-clotted. urea granular ##quality: standard export quality granular ##nitrogen : 46% by weight min ##moisture : 0.5% max fisper0.3% max dryer ##biuret : 1.5% max by weight ##anti-caking agent : treated against anti-caking ##free ammonia : 160 pxt, ppm. Max. ##prill : 95% max ##granulation : 2-5 mm 90-94% ##lesser than 2 mm : 2% ##greater than 3 mm : 4% ##melting point : 132 degrees c ##colour : standard white or pure white ##purity: free from harmful substances. ##radiation : certified non-radioactive ##consistency: 100% free flowing, non-clotted.

• MOQ 300 Metric Ton
• Blown Bitumen R85/90Penetration Bitumen R85/100

We are offering bitumen 80, 100. Penetration grade bitumen 100120 property value test standard specific gravity @ 2525’c 1.01-1.04 d-70 penetration @ 25’c 100120 d-5 softening point’c 4249 d-36 ductility @25’c 100 min d-113 loss on heating (wt)% 0.2 max d-6 drop in penetration after heating% 20 max d-6 & d-5 flash point’c 250 d-92 solubility in cs2(wt)% 99.5 min d-4 organic matter insoluble in cs2(wt)% 0.2 max d-4 spot test negative *a.a.s.h.o.t.102 penetration grade bitumen 6070 property value test standard specific gravity @ 2525’c 1.011.06 d-70 penetration @ 25’c 6070 d-5 softening point’c 4956 d-36 ductility @25’c 100 min d-113 loss on heating (wt)% 0.2 max d-6 drop in penetration after heating% 20 max d-6 & d-5 flash point’c 250 min d-92 solubility in cs2(wt)% 99.5 min d-4 spot test negative *a.a.s.h.o.t.102 blown bitumen r9015 property value test standard specific gravity @ 2525’c 1.05 approx d-70 penetration @ 25’c oct-20 d-5 softening point’c 8595 d-36 ductility @25’c 1.5 min d-113 loss on heating (wt)% 0.2 max d-6 flash point’c 225 max d-92 solubility in cs2(wt)% 99 min d-4