Stroydormash

Ekaterinburg, Russian Federation

We are offering rod-type diesel pile hammer. Diesel hammers for driving of concrete and steel piles: rod-type (ram mass 0, 25 tons – 3 tons) diesel pile driving hammers are designed for the reinforced concrete and steel piles and sheet piles driving into the ground. They are mainly used in foundation construction. The pile foundation construction technology by using diesel hammers is the most cost-effective of all available todays. Rod type diesel hammers. The wearing surfaces of the fuel and oil pump plunger pair is coated by epilam “polizim." greasing of the piston rings is provided through two diametrically opposite holes. The rods are mounted to the base properly and securely. The fuel pump is provided with a mesh strainer. The hammer shutting down backup system and the selfaligning spherical driving caps are installed on the hammer. The hammer is equipped with a dropping and lifting device. It is used an original design injectors with improved fuel atomization.

We are offering diesel pile hammer. Diesel hammers for driving of concrete and steel piles: tubular (ram mass 1, 2 tons � 5 tons) diesel pile driving hammers are designed for the reinforced concrete and steel piles and sheet piles driving into the ground. They are mainly used in foundation construction. The pile foundation construction technology by using diesel hammers is the most cost-effective of all available todays. 2 types of diesel pile driving hammers: tubular and rod a significant advantage of the tubular type diesel hammers compared to the rod type hammers is the best relation of impact energy and immersion ability to the hammer's proper weight . Tubular type hammers also have a higher durability compared to the rod type hammers. the basic quality of rod type diesel hammers that determined their widespread use on pile works, is soft impact and that rod diesel hammers can operate stably at low temperatures and significant depth of pile immersion. Technological features: tubular type diesel hammers. The wearing surfaces of the fuel and oil pump plunger pair is coated by epilam "polizim". Holders and fasteners are made of high-strength and treated steel thus preventing elongation and loosening. Fuel and oil pump are separate, which increases maintainability index and lifetime of the machine plunger pairs. For working on soft ground it is possible to manufacture tubular type hammers with swirl-type combustion chamber.

We offer digger derrick truck pole setter. Condition: new maximum digging depth: 3, 9 - 8 m max digging radius: 360-380 mm digger derrick truck mkm-200. Mobile rig â«3 in 1â»:telescopic crane, aerial lift and auger. Hole dia 360-800 mm, hole depth 3, 9-8 m, winch lifting capacity 4 t, aerial lift load capacity 0, 25 t, lift height 13, 3 m, rotation torque 6, 7 knm, telescopic boom length 9, 6 m.

Quick details condition: used altec dm-47 is digger derrick alteck mounted on russian truck ural. The whole digger derrick on truck or just the altec attachment are available for sale. general specification - bucket lift capacity (single-place) 136 kg - boom fully extended -11, 4m - maximum lift capacity - 5 500 kg - operating height - 15 m - drilling diameter - 0, 46 m - digging radius minimum 5, 5 m maximum 8 m - max torque - 16 000 n*m

We are offering truck mounted drilling rig. Feature: truck crane condition: new drilling rig with telescopic mast and hoist mounted on truck (gw 23, 5 ton, 225 hp) (hydraulics). For wide piles in dense soils. Max depth 20 m, max dia 1200 mm, torque 44, 5 knm, winch lifting capacity 3 ton, lift height 10, 5 m, 2-speed rotation actuator.

Quick details place of origin: united states condition: used year: 2006 altec db-35 is the best solution for limited access works. general specification • maximum lift capacity 1 361 kg • pole setting sheave height -10, 6m • reach from centreline of rotation 9, 2m • dig radius from centreline of rotation minimum 3, 2m maximim 5, 9m • boom articulation, degrees -6 to 75 • rotation 250 degrees • digger capacity 3, 39knm • maximum driving slope side-to-side 10 degrees front-to-back 15 degrees • travel width, minimum 864 mm • travel height, approximate 2, 0m

We are offering hoist carrier mounted drilling rig. Place of origin: sverdlovsk oblast russian federation drilling depth: 3 m drilling diameter: 360-800 mm max rotation torque: 5900 n*m max lifting capacity: 1400 kg drilling tool feed actuator: hydraulicmechanic drilling equipment rotation actuator: hydraulicmechanic chassis: tractor bm-205. Mast rig "2 in 1": hoist winch and blade borer (hydraulic). Supplementary working attachments: front bulldozer blade and loader. Hole depth 3 m, hole dia 360-800 mm, winch lifting capacity 1, 4 t, max rotation torque 5, 9 knm, technical productivity 15 m per 1 hour*.

We are offering hoist carrier mounted drilling rig. Feature: truck crane condition: new place of origin: sverdlovsk oblast russian federation brand name: stroydormash model number: bkm-317 drilling depth: 3 m drilling diameter: 360-800 mm max rotation torque: 5900 n*m max lifting capacity: 1250 kg drilling tool feed actuator: hydraulic drilling equipment rotation actuator: hydraulic chassis: truck bkm-317. Mast rig "2 in 1": hoist winch and blade borer (hydraulic or mechanical). Hole depth 3 m, hole dia 360-800 mm, winch lifting capacity 1, 25 t, rotation torque 4, 9-5, 9 knm, technical productivity 15 m per 1 hour*. * under this condition: diameter 500 mm, depth 3 m, medium soil density.

We offer urb-51. Drilling rig for geological exploration mounted on truck (gw 17 ton). Latest model. hole (depth, mdia, mm): augers â�� 60 360, core drilling dry â�� 60 76-225, dth â�� 100 88-180, dth rotary â�� 200 76-245, core drilling with mud pump â�� 300 76-225. Drilling equipment: hydraulics. Directional drilling 45-90â°. Max rotation torque 6, 4 knm. Winch lifting capacity 2 ton. Lift height 8 m. 4-speed rotation actuator (rotation speed - 55-640 rpm), moveable rotation actuator (600 mm to the right of the borehole axis). Pipe-clamping force - 150 kn, casing pipe pull down force - 100 kn, pull up force - 153 kn. Options (at choice): â�¢ compressor â�¢ water pump â�¢ free falling hoist â�¢ supporting table â�¢ hydraulic clamp for drilling stems application: â�¢ geological survey â�¢ geological exploration â�¢ drilling of geophysical wells â�¢ drilling of borehole for technical purposes â�¢ drilling of blast geophysical boreholes â�¢ pit-run drilling for blusting.