Ahmedabad, Gujarat, India
Our Products
When electrical wires/cables pass through holes, they are prone to get damaged by metal sharp edges. Rubber Grommets are those cable protectors, which when applied on wires/cables, not only protect them from cutting but also extend the life of machinery/equipment by sealing the holes, to avoid dirt, dust, foreign materials entry.
Rubber Concept manufactures variety of Rubber Grommets – both open as well as close type. Rubber Concept has developed no of dies to produce variety of Rubber Grommets in wide range of diameter, plate thickness, and hole.
Depending upon the application requirement, Rubber Grommets are produced from variety of Rubbers such as
Rubber Concept offers an unmatched value proposition when it comes to products and services specifically tailored to end use applications. Our focus on the details in this niche market has helped our customers improve roll performance and reduce maintenance down time expense. We are constantly working to refine our products, service and support to meet the ever diverse operating conditions of this industry.
Rubber Rollers Applications:"RubCon" rubber rollers are widely used in various applications:
Salient Features of "RubCon" Rubber Rollers:
Our team of specialists offers an extensive background in engineering, covering chemistry and the capability to design coverings to meet the most demanding applications. We can insure our customers to get the most suitable covering for the specified application with our own experience. This technical expertise and the extensive understanding of roll applications and requirements remains the most important distinguishing characteristic of the company.
Rubber Concept manufactures Rubber Rollers, mainly by moulding process, under high hydraulic pressure, which ensures compact microstructure thus longer life and durability. High Hydraulic pressure ensures excellent Rubber to Metal contact thus reduce the chances of bonding failure and entrapment of air. Electronic temperature controller ensures uniform curing of Rubber over entire length of rolls thus reduce the variations. Rubber concept has developed various dies and moulds in the diameter range of 15 - 110 mm and length range of 100 – 1100 mm. Bigger sized rolls are manufactured in the autoclave under steam pressure.
Rubber Diaphragms are flexible sealing material, which are used to prevent unwanted material to be transmitted. Rubber diaphragms should be flexible in nature as well as tough to avoid leakage while flexing. Rubber coated fabrics are normally used to make diaphragms in order to provide toughness. Rubber diaphragms are used in many flow control applications in chemical, pump and valve, oil and gas industries.
Rubber Concept manufactures rubber diaphragms form variety of rubber materials, such as Nitrile rubber, Polychloroprene (Neoprene) rubber. Rubber Concept has developed diaphragms with different fabrics such as Nylon, Rayon, Polyester, Cotton etc. Rubber Concept has developed various tools to make plain, cup, bucket type diaphragms. We also develop customized rubber diaphragms, based on the application requirements.
Apart from regular rubber applications, there are so many engineering areas, where rubber is used for flexibility, cushioning, leakage protection, and many other purposes. Compared to other metal processing, rubber is very easy and cost effective solution, so designers often design non-standard rubber components to meet their requirements.
Rubber Concept offers various solutions to make customized rubber components to OEMs and other users. These services include:
Rubber Concept extrusion department supplies tubing, cord, U-section, C-section, or any custom design rubber extrudate as per customer requirement. Rubber Concept can supply practically anything both in small and large quantities. Custom extrusion may be coiled for easy shipping and storage or cut in straight lengths to the desired size.
Rubber Concept specializes in producing rubber extrudate section in sponge rubber, having density less than 1 gm/cc. Rubber sponge section possess better sealing capability compared to solid section.
Rubber Concept has developed special adhesive tapes (PSA), to apply it to rubber extrusion section, for ease of assembly. These rubber extrudates are available with protective liner, upon removal of which extrudate can be sticked to any metal surface.
Our experience, innovation, and system capabilities combine to create faster and more flexible lead times, higher quality manufactured products, and an overall reduction in total cost to the customers.
Nitrile foam is a new age insulation material. These are made from 100% Nitrile rubber, with closed cell construction, which offer superior thermal insulation qualities. It provides protection against thermal loss, condensation and moisture accumulation. Nitrile foam is recommended to be used from -40 deg C to 105 deg C.
The major application areas of Nitrile rubber foam are:
Rubber Concept deals with Nitrile foam in both sheet as well as tube form.
Nitrile foam tubes: Nitrile foam tubes are available with variety of inner diameters, to cover the variety of piping system. Rubber Concept Nitrile foam pipes are ideal for chilled-water and refrigeration piping system. These can be available with option of aluminium foil. Rubber Concept also supply Nitrile foam pipe in fire safety grades and antimicrobial grades.
Nitrile foam Sheet: Nitrile foam is also available in sheet form. Rubber Concept supply Nitrile foam sheet with option of aluminium foil or single side adhesive for ease of assembly. Fire safety grades as well as antimicrobial grades are also available.
EPDM foam is manufactured from EPDM rubber. Due to its outstanding weather, ozone, UV and heat resistance properties, EPDM foam finds numerous applications in automotive, electronics and industrial segments. EPDM foams are available in wide range of densities and thickness.
Rubber Concept supply EPDM foam sheet, EPDM foam tape as well as EPDM foam gaskets. EPDM foam gaskets are manufactured from EPDM foam sheet with CNC controlled precise tools. Rubber concept offer foam tape and gasket with or without single side adhesive for ease of bonding to variety of surfaces. Rubber Concept frequently supplies a range of EPDM foam tape and EPDM foam gasket to solve issues of flow control, water leakage, cushioning and vibrations.
Owing to its excellent low temperature, high temperature, electrical, chemical properties; Silicone Rubber has found numerous applications in various industries, such as industrial, electrical, electronics, pharma, healthcare, food products etc.
Rubber Concept has developed various compounds, based on Silicone Rubber to meet varying requirements of different industries. At Rubber Concept, we handle Silicone Rubber of varying Hardness range (20 Shore A to 90 Shore A) and physical properties
Double stem seals are generally used for high head, exceeding 30Mtrs. Double stem seals can be used as Top or Side rubber seal, sometimes as Bottom rubber seal too. Rubber Concept specializes in PTFE (Teflon) cladding over bulb portion of Double stem rubber seal. PTFE cladding helps rubber seal to retain its flexibility while maintaining its position between the clamp bar and seal plate, thus improving durability and life.
Flat seals are generally used as Bottom rubber seals for all types of gates and pressed against bottom sealing plate. They can be of wedge type or radius type too.
Rubber concept manufactures various types and various designs of rubber seal corners. They can be manufactured by both factory moulding process as well as fabrication process. Strength of factory moulded rubber seal corner is much higher than the fabricated rubber seal corners. Combination of various types of rubber seals can also be prepared for various application.
We deals in manufacturing of wide range of Plastic Components.
