Coimbatore, Tamil Nadu, India
GST : 33ACUPV6633Q1ZH
Verified
Add Review
Our Products
We are the main supplier of this product.
We are the main supplier of this product.
| Description | RVD 6-60-P-S | RVD 12-80-P-S | RVD 12-125-P-S | RVD 20-125-P-S |
| Max. drilling capacity in steel (400N/mm) | 6mm | 12mm | 12mm | 20mm |
| Spindle bore | PB16mm/MT1/ ER16 | PB20mm/MT1/ER 20 | PB20mm/MT1/ ER20 | PB20mm/MT2/ ER32 |
| Spindle motor | 0 . 3 7Kw/2880rpm | 0.75kw | 0.75kw | 1.1kw |
| Spindle speed | 2800 to 6000 rpm | 1400rpm | 1400rpm | 1400rpm |
| Total travel | 60mm | 80mm | 125mm | 125mm |
| Working travel | 25mm | 25mm | 25mm | 25mm |
| Thrust force kgf | 164@6 kgcm2 | 240@6 kgcm2 | 240@6 kgcm2 | 395@6 kgcm2 |
| Description | RVT 16-60(leadscrew) | |||
| Max. drilling capacity in steel (400N/mm) | M5 x .8 to 16 x 2 | |||
| Spindle bore | MT 2 /PB 20 | |||
| Spindle Power | .75 kW | 1.1 kw | ||
| Speed Range | 400/750/1300 | 318/265/200 | ||
| Pitch range | M5x0.8 toM8x 1.25 | M8 X1.25 to M 16 X 2 | ||
| Quill Travel | 70mm | |||
We are the main supplier of this product.
We are the main supplier of this product.
Part : Motor Body CoverUnits of Operation : 9Drill : 6.7mm x 3NosDrill : 4.1 x 3NosTap : M5 x 3NosCycle Time : 20Sec
No of Operation : 12Drill : 5.1mm x 6 Nos, Tap : M6 x 6Nos, Cycle time : 15Sec
No of Axis : 3(LH, RH & REAR), No of Operations : 16NosLH : Drill 10.5x1No, drill 3.3 x 3NosRH : Drill 10.5x1No, drill 2.2mm x 4NosRear : Drill 10.5x1No, drill 6.8mm x 1No, Drill 3.3x5NosCycle time : 20Sec
We are the main supplier of this product.
Spindle Tapper : ISO40
Spindle Speed : 2000rpm
Spindle Tilt Angle : +/-5deg
z-axis thrust force : 15kN
Z-axis Travel : 200mm
X-axis Travel : 300mm
Y-axis Travel : 50mm(Manual)
Table to Spindle nose Min/Max 100/300mm
Controller : Rexroth
Data Acquistion software : spindle rpm, torque axis force and velocity against time and distance.
Weldable Material : Steel/copper/Aluminium
We are the main supplier of this product.
We R V Machine Tools are the Leading Manufacturers and Suppliers of Friction Stir Welding Machine.
Spindle Tapper : ISO 50
Spindle Speed : 3000rpm
Head Tilting angle - 5
z-axis thrust force :50KN (max)
Z-axis Travel : 300mm
X-axis Travel : 400mm
Y-axis travel (manual) : 100mm (Optional: Servo)
Table with threaded holes : 500x400mm
Table to spindle nose (min/max) : 100mm/400mm
Controller : Rexroth
Data Acquistion software : Spindle rpm, Torque, axis force and velocity against time and distance
Weldable Material : Steel/copper/Aluminium.
Features
We R V Machine Tools are the Leading Manufacturers and Suppliers of Friction Stir Welding Machine.Double Column Friction Stir welding Model: FSW-DC-10T- NC
Spindle Tapper : ISO 50
Spindle Speed : 3000rpm
Head Tilting angle - 5
z-axis thrust force :100KN
Z-axis Travel : 200mm
X-axis Travel : 2000mm ( OPTION UP TO 12000MM)
Y-axis travel : 500mm
Table to spindle nose(min/max) : 600mm/800mm
Controll : 2 mode Control Force control and Position control
Data Acquistion : Input & output data Spindle rpm, Torque axis force and velocity against time and distance
Weldable Material : Steel/copper/Aluminium.
Steel 2 to 25mm /Aluminium 2to 50mm
We R V Machine Tools are the Leading Manufacturers and Suppliers of Friction Stir Welding Machine.Linear Friction welding machine - Model : FW- 6T - NC
Specimen clamping : Manual
Axis force : 60KN
Amplitude : 1 4mm
Frequency : 20 60 Hz (Crank mechanism)
Slide travel : 300mm
Controller : PC based 2 mode Control Force & Position
Data Acquisition software : Input & output data Spindle rpm, Torque axis force and velocity against time and distance.
Steel 2 to 25mm /Aluminium 2to 50mm
We are the main supplier of this product.
Servo Hydraulic Friction Welding Machine We R V Machine Tools are the Leading Manufacturers andSuppliers of Friction Welding Machine(NC.
| Model | Max.upset force (KN) | Max. component dia /Steel |
| FW – 3T | 30 | 10mm |
| FW – 6T | 60 | 19 mm |
| FW – 10T | 100 | 25mm |
| FW – 15T | 150 | 40 mm |
| FW - 30T | 300 | 57 mm |
| FW- 45 T | 450 | 69 mm |
We are the main supplier of this product.
| Description | 3T-NC | 6T- NC | ||||||
| Spindle Taper | A2-4 | A2-5 | ||||||
| Spindle Speed | 2000rpm(VFD) | 2000rpm(VFD) | ||||||
| Part Clamp | Hyd Chuck | hYD chuck | ||||||
| Max. slide force | 30 KN | 60 KN | ||||||
| Max. slide travels | 300mm | 300mm | ||||||
| Main Slide Drive | Servo Motor gear box | Servo Motor gear box | ||||||
| Max.dia of component | 10mm | 16mm | ||||||
| Max. length of component | 500mm(stationary),100mm(rotary) | 500mm(stationary),100mm(rotary) | ||||||
| Controller | Rexroth | 2 mode Control Force control & Position control | ||||||
| Data Acquisition & Analysis-Software | Input & output data Spindle rpm, Torque axis force and velocity against time and distance | Input & output data Spindle rpm, Torque axis force and velocity against time and distance | ||||||
| FRICTION WELDING -NC | FRICTION WELDING-HYDRAULIC | |||||||
| Model | FW 30 | FW 60 | FW 100 | FW 150 | FW 300 | FW 450 | ||
| Max Forge load | 30kN | 60kN | 100kN | 150kN | 300kN | 450kN | ||
| Spindle Speed | 3000 rpm | 2500 rpm | 2000 rpm | 2000 rpm | 1500 rpm | 1200 rpm | ||
| Spindle power | 12 kw | 15 kw | 17 kw | 22 kw | 37.5 kw | 55 kw | ||
| Axis travel | 300 mm | |||||||
| Weldable range | 5 to 10 mm | 8 to 16mm | 10 to 22mm | 10 to 30 mm | 15 to 45mm | 25 to 60mm | ||
| Controller | Force and position control mode control | |||||||
| Data acquisition | Spindle rpm, axis velocity and force against time | |||||||
| LINEAR FRICTION WELDING MACHINE | ||||||||
| Model | LFW 30 | LFW 60 | LFW 100 | |||||
| Max weld area in steel 400n/mm2 | 100 | 200 | 500 | |||||
| Part clamp | Clamp pads (manual) | |||||||
| Axis load in kN | 30 | 60 | 100 | |||||
| Oscillating slide amtitude inmm | 3 to 5 | |||||||
| Oscillating slide freequncy | 30 to 60 | |||||||
| Axis slide travel in mm | 300 | |||||||
| Controller | Force and position control mode control | |||||||
| Data acquisition | Oscillating slide motor rpm torque, axis slide force and velocity against time and dis | |||||||
We are the main supplier of this product.
We are the main supplier of this product.
We are the main supplier of this product.
We are the main supplier of this product.
