Vadodara, Gujarat, India
Our Products
Spun bonded filter cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges are available with core & without core version. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on central molded core, without any binders, resins or lubricants.
OPERATION OF SPUN BONDED FILTER CATRIDGE
Unfiltered fluid passes through depth filter matrix and enables the progressive retention of finer particles, which provides high efficiency, high dirt retention & long filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.
SALIENT FEATURES OF SPUN BONDED FILTER CATRIDGE
Type HM pumps for liquid with high melting point are high melting pumps for thermosensitive liquids with high solidifying temperature. These pumps are provided with a heating jacket on the outer body of the pump and motor to prevent liquid from solidifying during pump operation. Suited for fluids with melting points from ambient upto 150 C.
APPLICATIONS
CONSTRUCTION
MIC pumps are adequately designed with foot-mounted Casing, to accommodate high piping loads and high pressures. Centre line discharged Casing design aids natural venting of vapours from the pump.
Over-designed shaft accommodates high torque & power transmission requirements. Over-sized bearing absorb high radial and axial thrust loads, resulting in minimum vibration & noise levels.
IMPELLER
Solidly moulded semi-open Impeller with metal insert ensures high strength & durability. The Impeller is dynamically balanced to ISO 1940 to achieve minimum vibration and extended bearing life.
MATERIALS
The MIC series pumps are available in the following materials :
LINING MATERIALS
Back pull out design permits quick inspection, repairing of rotary
without disturbing the pipeline & Motor connections lower maintenance time.
Open impeller suitable for handling anything from clear liquid, abrasive, corrsive, slurries to stringy materials.
FEATURES
Closed impeller suitable for handling clear liquid.
Back pull out design permits quick inspection, repairing ofRotary assembly without disturbing the pipeline & motorconnections lower maintenance time.
FEATURES
MBM Pumps are designed for operating reliability, easy maintenance and maximum interchangeability. These pumps offer superior hydraulics and wide coverage to meet exact requirements at best efficiency. Heavy duty bearing assembly ensures rugged and dependable service. Improved hydraulic coverage and higher efficiencies can be obtained from various models. Wide range of materials available to meet any service requirement.
DESIGN CONSTRUCTION DETAILS
Metalic Pumps construction offered in Various Materials
CASING
Top centreline discharge self-venting casing design fully confined casing gasket casing foot support for handling misalignment, distortion from pipe loads and suitable for back pull-out construction.
BACK PLATE
The back plate is designed for gland packing and mechanical seal installation. The large bore provided in case of mechanical seal arrangement enhances the mechanical seal life. The flow path in series MBM pumps is between the rear of the impeller and face of the back plate. The abrasive and erosive wear takes place on the face of the back plate and not on the expensive casing. This feature reduces the replacement costs.
MIPP industrial centrifugal Plastic Pumps are designed and manufactured to meet the stringent requirement for handling corrosive liquids including moderate slurries. The pump design confirms to IS-5120 standard, which gives higher efficiency. All wetted parts coming in contact with media are injection molded, which can withstand in higher pressure. The pump shaft is protected from corrosive media with reliable sealing arrangement. Our pump manufacturing program ensures quality, reliability and trouble free operation for long duration.
DESIGN CONSTRUCTION DETAILS
Casing, stuffing box and impeller are offered in Various Materials
IMPELLER
Solidly moulded semi-open Impeller with metal insert ensures high strength & durability. The Impeller is dynamically balanced to ISO 1940 to achieve minimum vibration and extended bearing life.
SHAFT
As a standard shaft is offered EN-8 Materials. Different materials can be offered on request.
Filter elements suits various applications like water, gas, steam, solvents, process fluids, alkalies, acids, beverages and finished products to meet almost all filtration needs, chemical process, pharmaceuticals, food and beverages and electronic industry. Our filter elements are available in various types viz. fibre wound, melt blown, pleated membrane, sintered metal, stainless steel mesh, wedge wire etc. for effective removal of fine particles down to 0.01 microns.
Pleated synthetic media filter elements for use in pre-filter, final filter and sub micronic membrane filters are also offered with validation documents wherever applicable. Metallic filter elements like sintered SS and multi-layered SS mesh are ideal for applications calling for high strength, excellent corrosion and temperature resistance besides having regenerable properties. The fibre wound and melt blown filter elements have true graded density and high dirt holding capacity resulting in higher flow rates and longer life. Sterile grade filter elements are designed to withstand multiple in line stream sterilisation cycles or can be autoclaved.
| Filter element type | Spun, fibre wound, pleated, resin bonded | Sintered, multi-layered mesh, pleated mesh, plain mesh |
| Materials of media | polypropylene, polyester, cotton, ceramic, glass fibre, nylon, PTFE, PES, PVDF | Stainless steel, bronze, hastalloy, monel |
| Available pore size in microns | 0.01, 0.1, 0.2, 0.45, 0.5, 0.8, 1, 2, 3, 5,10, 20, 25, 40, 50, 75, 100 | 0.5, 1, 5, 10, 20, 25, 40, 50, 75,100, 150, 200 |
| Standard cartridge dimensions | 21/2″ dia x 5, 10, 20, 30 and 40″L | 2 1/2″ dia x10, 20, 30 and 40″L or any other size |
| standard end fitting style | double open end, threaded open end, double “O” ring and fin | double open end, threaded open end, double “O” ring and fin or any other |
Compressed Air Filters protect your equipment and delicate instruments from the dirt, water, and oil. Compressed air filters remove these contaminants at an efficiency rate of 99.99% for 0.01 micron particles and droplets. Compressed air filters are used widely by the manufacturing industry for a variety of tasks including valve operation; spray coating, vacuum packing and cleaning. These compressed air filters are designed as per the customer / site requirements.Compressed air filters equivalent to Ultra Filter, Zander, Domnic Hunter etc can be developed as per clients specific requirements.
TECHNICAL SPECIFICATIONSOFFILTER HOUSING/CATRIDGES
Filter bags are manufactured for optimum filtration performance. They are made from carefully selected media, according to the specifications of the process industry. Various types of media are used such as needle felt, monofilament and multi-filament. They are effective in removing solid particulate from liquids where large volumes of contamination are present or where highly viscous fluids are required to be filtered. They offer an effective solution to many filtration problems.
SALIENT FEATURESOF PP FILTER BAGS
Pleated series water filter cartridges outperform wound, spun, melt blown, resin bonded and other depth type filter elements because the cartridges are pleated to provide increased surface area and longer life.
Lower pressure drop is another significant advantage, using pleated cartridges, which allows for increased flow rates and the use of smaller filter housings to reduce capital equipment costs.
Further savings are provided because our 100% synthetic filter media is cleanable, five micron and up, to lower cartridge replacement costs.
These cartridges provide depth filtration for greater sediment removal, along with more surface area with our pleated design.
