Pune, Maharashtra, India
GST : 27AGGPN1109D1ZU
Verified
Add Review
Our Products
We bring forth efficient Magnetic Float Switch for our valued clients. The Magnetic Level Switch consists of non-abrasive float carrying permanent magnet and non-ferrous stem carrying one. Two or multiple reed switches. The float glides along the stem and when the float nears the vicinity of reed switch the magnetic field of permanent magnet forces the contact to close, thereby completing the external electrical circuit. We offer Magnetic Level Switch at reasonable price.
Applications :
Due to simple design, reliability and with only one moving part i.e., Magnetic float, Magnetic Level Switch finds application in various liquids where accurate and repeated liquid level control is called for. Magnetic Level Switch is suitable for storage tanks, utility tanks, process tanks, hydraulic power pack, centralized lubrication system, fuel tanks, cooling tower, textile, pharmaceuticals and special purpose machines.
Download
Technical Details
| ∅ 34 x 36 Nylon foam float |
∅ 40 SS 316 Float | ∅ 52 SS 316 Float | ∅ 68 SS 316 Float | ∅ 50 PP Float | |
| Temperature | 0oC to + 80oC | -25oC to + 125oC | 0oC to + 80oC | ||
| Pressure Max. | Atmospheric | 20 kg/cm2 | 2 kg/cm2 | ||
| Stem Size | 12.7 m | 16 mm | 20 mm | ||
| Flange Size | OD 75mm PCD 60mm | OD 100mm Pcd 80mm | 2½ table D | OD 100mm Pcd 80mm | |
| Max. Length | 3000mm | 5000mm | 3000mm | ||
| Accuracy | +2mm | +5mm | +5mm | ||
| Set point | 1 to 10 | ||||
Float Level Transmitters are ideal for continuous Level monitoring in Water, Diesel, Chemical and Oils for accurate level Measurement. The Output is not affected by liquid type, temperature, Pressure and other physical parameters. The Transmitter is factory calibrated and is ready to use.
Construction
Float Level Transmitter consists of non magnetic sealed stem containing series of reed switches and resistor, Float carrying magnet, Mounting adaptor (or flange) and enclosure containing electronics. Consider our Float Level Transmitters for all your continuous liquidlevel monitoring needs like Water, Diesel, Lube oils, Fuels, Chemicals and Petrochemical liquids. Here are just few areas where transmitter can be used :
What is Capacitance Level Transmitter?
Capacitance Level Transmitter is the type of transmitter that operates like a capacitor. These capacitors consist of two conductive plates which are separated by the medium called as insulating material having dielectric constant. The insulated electrode acts as the first plate and the other plate comprises a tank wall or reference electrode.
Working Principle Their working depends upon the principle of change of capacitance. The capacitance depends upon the variety of fluid level such as aqueous and organic liquids, solids, slurries, powders, granular material, etc.
The output is 4-20mA, 4 wire connections for isolated supply & 3 wires for non isolated supply. 2 wire loop powered output is also available. The tank empty (4mA) & Full (20mA) calibration is through easy field calibration button in case of 4 wire & 3 wire. For 2 wires it is through multi turn trimpot. Rigid probe is offered for tank depth upto 3 mtr & Flexible probe upto 15mtr. Capacitance Level Transmitter is available with different mounting arrangement to suit customer requirement. It is widely used for water, diesel, oil and chemical application.
Highlights :
Properties of It
Ultrasonic Level Transmitter Exported By Our Company :
Our Ultrasonic Level Transmitter manufacturer in Pune creates these transmitters that work by using the speed of sound as given in ‘Time of Flight’ as their working principle for adequate result for our valuable clients. We suppliers in Pune provide a huge variety of these level transmitters that are able to emit pulses of higher frequency range for easy measurement of liquids.
Meaning- Ultrasonic Level Transmitter
Properties of These Transmitters
Highlights :
Model LV36 Hydrostatic liquid level transducers and transmitters with flush diaphragm is designed for a wide variety of level measurement applications. This model pressure sensor and is protected by the stainless steel (SS) housing. Featuring the flush diaphragm makes the LV36 suitable to measure viscous media or media with small particles, so as to have diverse measurement applications.The standard reference pressure is gauge (or relative) pressure realized through a vent tube in the cable. The reference pressure can also be absolute pressure on request.The measuring range of LV36 transmitters spans from 01 to 0200 meter water column (mH2O) withmeasuring accuracy of 0.5%fs (fs = full scale). The output signal of transmitters can be configured toeither current loop (420mA, standard), voltage output (0.54.5V, 15V), or digital output (I2C orSPI). The millivolt signal directly from the Wheatstone ridge circuit is also available on request(transducer version).
Download
Technical Details
| Parameters | Units | Specifications | |
| Measuring media | viscous fluid, or fluid with particles which is compatible with 316L SS | ||
| measuring ranges* | mH2O | 1m, 2m, 3m, 5m, 6m, 8m, 10m, 12m, 15m | |
| overload | %fs | 150 | |
| output signal | for transmitters for transducers |
mV/V | 4~20mA (standard). ≥ 15 |
| power supply | for transmitters | Vdc | 24 (typical), 12, ..., 36 |
| excitation | for transducers | Vdc mA |
5, ..., 10 0.5, ..., 2 |
| accuracy | %fs | ≤ ±0.5 | |
| response time | %fs/year | ≤ ±0.2 (standard), ≤ ±0.1 is available on request | |
| long-term stability | ms | < 1 (10%~90% of leading edge) | |
| input resistance | for transducers | Ω | 2000~8000 |
| output resistance | for transducers | Ω | 3500~6000 |
| insulation resistance | MΩ @500Vdc | > 500 (transducer only) | |
| storage temperature range | °C | -40~+100 | |
| operating temperature range | °C | -20~+85s | |
| compensated temperature range | °C | 0~70 | |
| temperature coefficient of span | %fso/°C | ≤ ±0.02 | |
| temperature coefficient of zero | %fso/°C | ≤ ±0.02 | |
| process connection | submersible in | ||
| electrical connection | Φ7.3mm, 4-core shielded black PVC cable with/without a vent tube | ||
| membrane material | 316L SS | ||
| housing material | 316 SS | ||
| environment protection | P rating | IP68 | |
| weight (without cable) | gram | ~250 | |
Graph
Fuel level sensoris a low cost capacitance type level sensor. It is designed for monitoring levels in fuel tanks of vehicles, Bulk storage tanks fitted on vehicles, diesel storage tanks. The Design is simple & light weight. It measures the level accurately and reliably. The sensor output is connected to vehicle monitoring and tracking system or level indicators. The sensor consists of measuring probe which is encircled with a reference probe. This given more linear output and is not affected by turbulence inside the tank. Fuel Level Sensor As the fuel level increases, the capacitance value also increases. The fuel acts as the dielectric between electrodes. The increase in capacitance directly proportional to increase in fuel level. This change in capacitance is measured and converted into 4-20mA, 0-5V, 0-10V, RS485 O/P.
Percentage Level Indicator is used to know the level of liquid in storage or process tank. The unit consist of a Percentage Level Sensor mounted inside the tank & a Digital Level Indicator mounted in control room or pump room or user accessible area.
Sensor
The Percentage Level Sensor is a Magnetic Float Operated Level Sensor with ten set point with each set point equal to 10% of the tank depth. The sensor gives variable resistance output from zero U to 2.5k U. for each set point the output resistance will increase by 250 U.
Pump ON & OFF is provide in two modes :
Auto / Manual selector switch is provided for manual intervention. Similarly Alarm is between Low & High Level which is field selectable between ten steps. Digital Level Indicator also provides optional 4-20mA output. It is very useful for Water Sumps, Overhead Tanks, Diesel Storage Tanks, Diesel Day Oil Tanks, Oil Tanks, Chemical Tanks, Storage Tanks Etc.
Indicator
Digital Level Indicator is a microcontroller bases electronic unit for display of level in percentage. The level is displayed as 0%, 10%, 20%, 30%, 40%, …………80%, 90% & 100%. The display is through Seven Segment bright LED display. The unit is connected to Percentage Level Indicator supplied by us. Digital Level Indicator comes with a unique feature of Dual option of Pump control Or Alarm facility. The unit can be used to either switch ON & OFF the pump or provide High & Low Level Alarm by selecting suitable DIP Switch.
Superior Quality Materials designed compactly
Magnetic Level Gauge is manufactured using high quality materials meeting all standard parameters. Depending on material of construction Level Gauges are resistant to chemicals, acids, alkalis, aggressive liquids, high temperature and high pressure. They are designed to indicate liquid level and can also provide continuous analogue output through Reed Level Transmitter.These Magnetic level gauges are designed as an alternative to glass level Gauges which are comparatively unreliable and inaccurate.
Early Delivery, Best quality and Cost Effective :
mounted level Gauge and Top mounted level Gauge with customer requested process connections. Level Gauge is available for High temperature, High Pressure, material of construction.
Liquid Level Controller (APC-1) is used to automatically start & stop the pump for filling the tank or emptying the tank with alarm indication With liquid level inputs from the Magnetic Float Switch fitted in the sump and over head tank, (APC-1) controller can be used for PUMP UP or PUMP DOWN operation. Alarm relay is provided to indicate abnormality in the process like liquid level raised beyond high level setting or drops below low level setting in the Overhead or sump tanks.
Inputs :
Outputs :
