SAKSHI CHEM SCIENCES PRIV...

Bonding Agent is a acrylic copolymer specially developed to improve the bonding properties of cementitious compositions. When used in combination with standard quality of Ordinary Portland cement, enhances the mechanical properties such as bonding(adhesion) with various building materials, flexural, compression and impact strength, Bond it improves the thin section fragility of cement when used as coating. Bond it is an admixture polymer cement composite for multipurpose use i.e. bonding of cementitious material, waterproofing, surface protection, repair rehabilitation, floor topping, etc.

Features & Advantages

• Bonds (adheres) strongly to most of the building materials.
• Cures to a hard, tough, wear resistant surface.
• Can be applied to uniform thickness coating on horizontal and vertical surfaces.
• Allows trapped water vapour to escape but prevents ingress of moisture blistering and adhesion failure
• Makes cement mortar or coating compact thus preventing salt penetration into concrete.
• It is unaffected by UV light and prevents discolouration of concrete.
• It will not corrode reinforcing steel
• Coating is highly durable even in continuous contact with water.
• It is resistant to water, dilute acids and alkali solutions.
• It is non-flammable, non-hazardous. Does not evolve toxic gases when exposed to fire
• Non toxic to human beings.
• Most properties improve on ageing

Curing Compound is a ready-to-use, water-based solution designed to retain moisture in freshly placed concrete. By forming a thin, protective membrane on the surface, it prevents rapid water evaporation, ensuring proper hydration and optimal strength development. This compound reduces surface cracking, improves durability, and eliminates the need for traditional wet curing methods. Ideal for use on pavements, slabs, bridges, and other large concrete surfaces, it is easy to apply by spray or brush and complies with standard curing requirements.

We are leading manufacturer of protein, super protein and a synthetic based foaming agent for cellular lightweight concrete(CLC).The foaming agentis such chemical which is highly used in the field of construction for making bricks which are simply made up with the proper amount of cement, fly ash and foaming agent finely mix with water in particular compressed air. What makes these bricks which are made with foaming agents different from other bricks due to some specific qualities such as it is very eco-friendly have very lightweight so due to this it is easy for transporting it also have the soundproof quality which makes it different from other bricks. This agent produces almost no fumes of toxic or any emission over the lifetime.


Features:

• Enhanced shelf life
• Accurate composition
• Effective in usage

Additional information:

• Purity:90% foaming agent
• Type: plant protein foam agent
• Usage: construction and foam concrete
• Application: CLC wall panel, foam concrete brick, insulation board
• Processing: foam concrete Brick Production Line
• Method: Autoclaved Aerated Concrete
• Condition: New
• Brick Raw Material: Concrete
• Brand Name: Addage

Centering, it is basically known as a temporary structure on which layers of vault and arch laid during the process of construction. After placing the arch once it gets the desired strength and when it becomes able to support itself then the centering can be removed.

It is necessary to apply centering oil before laying the layer of arch on centering it requires because when the arch gain its strength and centering is supposed to be removed there should be a greasing agent in between the surface of centering which stays away the base of arch and remove the centering easily without damaging the upper layer.

MHEC (Methyl Hydroxyethyl Cellulose)is a non-ionic, water-soluble cellulose ether derived from natural plant fibers. It is widely used as athickening agent, binder, stabilizer, and water retention additivein various industrial applications, particularly inconstruction, paints, coatings, ceramics, and personal care products.

Key Features:

• Excellentwater retentioncapability

• Improvesworkability and adhesionin cement- and gypsum-based formulations

• Providesthickening and viscosity control

• Enhancesopen timeand reducessagging

• Compatible with a wide range of additives and formulations

• Non-toxic and biodegradable

Main Applications:

• Tile adhesives and grouts

• Wall putty and skim coat

• Cement-based plasters and renders

• Dry mix mortars

• Paints and coatings

• Detergents and cosmetics

Addage Non-Metallic Floor Hardener is a high-quality, mineral aggregate-based dry shake hardener designed to enhance the surface strength, wear resistance, and durability of concrete floors. It is ideal for medium to heavy-duty applications where metallic hardeners are not required or desired, offering long-lasting protection against abrasion, dusting, and surface wear.
Key Features:

• Made from specially graded non-metallic aggregates
• Provides excellent abrasion and impact resistance
• Reduces surface dusting and wear
• Enhances floor durability and compressive strength
• Non-rusting, ideal for wet or damp environments
• Available in natural and pigmented shades

Recommended Applications:

• Commercial and industrial floors
• Garages and warehouses
• Car parks and workshops
• Retail outlets and service areas
• Cold storage and food processing units