Salzer Electronics Limited

Periyanaickenpalayam, Coimbatore, Tamil Nadu

It is manufactured from specially compounded high-impact rigid polyvinyl chloride. It will not peel, chip or crack. It is non-flammable and non-brittle too. The unique cover locking design prevents popping up of wires while removing cover. The ducts are offered in various colours and slotting styles. The colours we offer are greenish grey, black, ivory, white, blue and green. It is typically used in poorly ventilated areas such as aircrafts, rail cars or ships. It is also used extensively in the railroad industry. It stands strong during short-circuit.

Specifications :

• Snap fit cover
• Non slip cover
• Snap fit in Din sizes, restricted slots
• Wide range from (15X15 mm) up to (150X150 mm)
• Standard, Thin, Oblong, Circular
• Various Colour options & Custom built profiles
• Flame retardant UL VO material, RoHS & FRLS types available

The offered CAM operated rotary switches are used to make or break operation in a sequential way by rotating the switch to different positions.

The basic operating mechanism of Cam Switch is required to suit intended application coupled with “Quick-Make”, “Quick-Make-Quick-Break” and “Spring Return” operating mechanisms are offered to cover wide range requirements.

CAM switches are suitable for AC as well as DC switching applications. In the AC switch range, we offer open terminals, touch-proof, rear termination, side termination and screw less terminals. We also offer versatile mountings. The D series switches are designed for DC switching applications. These Switches are constructed using snap action mechanism which provides "Quick Make Quick Break" of the contacts which is essential for DC switching.

Specifications

• Touch proof, rear termination, side termination and screw less terminals
• Mountings: Standard Front Panel, Rear, 22.5 mm dia., Din rail, Mix & Match, Center Key lock, Pad Lock & Door Interlock switches
• Spring return to Neutral, Memory Feature & Sequential Lock

Solar isolators are switch gears for interrupting the inverter from the solar panels. DC Changeover switches are used in Solar pumps for switching power between Solar & Grid supplies

Description Application : 

• Photovoltaic Isolators in Roof top Solar Panels
• AC / DC Changeover in Solar Pumps - See Application Notes
• Inverter Applications - Battery Charging from Solar-Main Switch
• Emergency ON / OFF

Specifications : 

• Tested as per IEC 60947-3 , DC21B and UL 508i
• PV1 & PV2 certification
• Rating 32A at 1500VDC & 40A at 1000VDC
• IP 65 & Padlocks are available
• Easy Installation
• Compact and reliable
• Finger Protection
• Wiping Contacts
• Excellent switching and high short circuit capacity
• Insulated Shorting Links are provided with switch
• DIN rail mounting - Suitable for DB boards
• Various Panel mounting Options - Front mounting, Rear mounting, Enclosure mounting

General purpose relays are ideal to use instead of mechanical relays. The relays are used to transfer electricity for high voltage or frequency applications.

We offer general purpose miniature relays with LED indication and 3 poles. It is ideal for power and sequence control, instrumentation, industrial controls and automation systems.

It is highly durable and reliable. The relays with 5/10 Amps are used in UPS, inverters, voltage stabilizers, process control systems, instrumentation, automation system, vending machine, machine tools and textile machineries. 10/16 Amp relays are elegant, sturdy and lightweight. They are great for air conditioners. As per client demand, we offer them with AC and DC coils.

Specifications :

• AC & DC relays from 3 to 80 Amps from 1 to 4 pole
• DC power relays up to 125 Amps
• Miniature, General purpose, Power & Automotive Relays
• Termination via Solder, PCB mounted, Plug-in and Screw type terminals
• ERDA Tested & complies with JSS standards
• Relay Modules: 1 & 2 Changeovers with 2, 4, 6 & 8 channels

The offered load break switches are the finest mechanical and electrical devices. We manufacture them keeping fine quality in mind.

We offer breaker control switches, isolators, double break contacts, multiple mounting options, changeover switches, DC isolators and DC changeovers.

Our latest LB series of load break switches and photo voltaic switches comply with latest specifications for modern low voltage devices. It is recognised in the market for its outstanding electrical characteristics such as compact design; contribute to space saving installation and operational convenience. The basic construction and design of the switch makes it highly compact, safe and reliable. It is manufactured using polyamide glass filled material which is recognised for its insulation. It is highly reliable to withstand short circuit currents.

It is used for isolators, main switch, inverter applications and emergency ON and OFF. We offer various panel mounting options too such as front mounting, rear mounting and enclosure mounting.

Specifications : 

• Load Break (Isolator) range from 16-125 Amps
• Up to 8 poles
• Multiple mounting options, ABS / Aluminium / Sheet Steel enclosures / IP65 / NEMA Rated
• Add on pole–Power / Neutral and Auxiliary pole
• Changeover switches from 25-125 Amps up to 4 poles

Photo Voltaic Isolators Specifications

• DC Isolators
• Range 25A to 63A upto 1000 VDC
• Mounting Options: Standard Front Mounting, DB Mounting , Door Interlock & Enclosure Mountings
• DC Changeover
• Range 25A to 63A upto 1000 VDC
• Mounting Options:Standard Front Mounting, Door Interlock & Enclosure Mountings available

Description : 

• The limit and foot switches offered by us is an electro-mechanical device that consists of an actuator mechanically linked to a set of contacts.
• It is used in a variety of applications and environments. It is easy to install and reliable in operation.
• We offer limit switches in a range of different series. Each series is designed for a different application. The series are PC 100, PC 200, PC 300, PC 400, PC 600, PC 900 and PC 1500.
• We also have a wide range of foot switches such as compact foot switch, heavy duty foot switch, domestic foot switch, mini foot switch and meditwin.

Specifications : 

• Limit switches : Available in Normal / Snap action types
• Precision limit switches : 1 NO + 1 NC / 2 NO + 2 NC
• Operating force : From Light to Heavy duty applications
• Versatile mounting heads
• Rugged aluminium die cast housing
• Foot switches : With Guard / Shielded versions Twin switches also available
• Zinc die casting housing available on request

Description : 

• The terminal connectors produced by us are used in the automotive and medical industry. It is engineered for quality and performance.
• Every component of the terminal block is designed to provide a product that offers efficient functionality.
• The screw or spring clamp is the heart of the terminal block. It is engineered for perfect grip over solid or stranded wires. The special spring steel clamp ensures a tight yet gentle grip over the wire. The polyamide 66 housing encloses the clamps and provides the current bar with safe creep age and clearances. It also gives it long life insulation and unique flexibility. The terminal connectors are certified by UL and CSA for North America. With the terminal connectors, we also offer a wide range of accessories.

Specifications : 

• Range from 2.5 – 95 Sq.mm Universal mounting
• Standard terminal connectors, Miniature, Double Level, Triple Level connectors & Screw less connectors
• UL94 V0 grade material
• Fuse terminals, Earth Terminals, Stud Test & Disconnecting Terminals. Connectors with Electronic components & Distribution Terminal Blocks
• Accessories : End plate / Clamp, Marking ferrules, Group markers, shorting links & Din rails

From small alarm panels to full PLC panels, we have it all. The control panels can be used to monitor and control the speed and working of various machines.

We at Salzer have the ability to customise control panels as per your industrial or commercial requirement.

Description : 

We offer our clients standard contractors, mini contractors, control relays and bimetallic overload relays.

The contractors and relays are safe and easy to install.

Overload relays control and protects electric motors. They prevent short circuit and prevent overload from occurring. When a relay is used to switch a large amount of electrical power through its contacts, it is given the name contractor. Contractors typically have multiple contacts. Along with the contractors, we also offer auxiliary contacts, PCB link modules, electronic timers, mechanical interlocks, wiring modules and surge compressors.

Specifications : 

• Standard Contactors 4 Frames 9A to 105 Amps Reversing, Non Reversing
• Accessories : Front & Side Mounted Auxiliary Contact, Wiring Modules Interlocks, Surge Suppressors
• Mini Contactor : 7A to 16 Amps, Control relays - 16 Amps
• Accessories : Auxiliary Contact, PCB Link Module, Electronic Timer, Mechanical / Electrical Interlocks, Wiring Module, Surge Suppressor etc.
• Bimetallic Over Load Relay 5 Frames from 0.28-112 Amps

Description : 

• We at Salzer offer our clients, motor control products. It has a universal rating and marking.
• It is available in 2 frame sizes of 32 and 63 amps. It is a combination motor controller with short circuit protection and overload tripping.
• Motor protection circuit breakers are ideal for group motor application and tap conductor protection. Some of the functions are motor disconnect function, branch circuit protection, motor control function and overload protection. The ratings conform to manual motor controller. We have 8 relay range available from 11 to 64 Amps.

Specifications : 

• Motor Disconnect function, Branch circuit protection, Motor control function & Overload protection
• Available in 2 frame sizes 32 & 63 Amps
• Ratings confirm to Type E & Type F Combination motor controller as per UL508–NKJH clause
• Ratings confirm to Manual motor controller as per UL508–NLRV clause
• Suitable for Group motor application and Tap conductor protection and 8 relay ranges available from 11 to 63 Amps

Description : 

• The MCBs save electrical connections and appliances from facing overload and short circuit.
• They are of great utility in households and commercial installations.
• The technology of the MCBs offer enhanced operational safety and easy installation for all kinds of applications. The offered product can also be used as a non-frequent changeover of electric circuit. We offer MCBs in single pole, double pole, three pole and four pole.

Specifications : 

• High performance
• Easy installation
• Flame retardant and non-toxic
• No overload and short circuit
• Ideal for household, commercial and industrial applications

Description : 

• Rogowski Technology of Current measurement With its over 20 years of experience in Toroidal Technology Salzer- Engineers have pioneered the design, development and manufacturing of Rogowski coils and we have been supplying the Rogowski Coils to various OEM’s worldwide.
• A Rogowski coil, named after the German Physisct Walter Rogowski, is an electrical device for measuring alternating current (AC) or high-speed current pulses.    It consists of a evenly wound helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil. The winding is done on a non-magnetic/non-metal former of constant cross sectional area. The whole assembly is then wrapped around the straight conductor whose current is to be measured. The speciality is there is no metal (iron) core.

Features : 

• Rogowski coils have been used for the detection and measurement of electric currents for decades. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current.
• Even though Rogowski Coils are low power sensors, the protection system is immune to external electromagnetic fields.
• Rogowski Coil can replace CTs for protection, metering, and control purposes.
• Rogowski Coils are accurate, small, light, and easy to install. They do not saturate.
• Rogowski Coils provide superior differential protection for power transformers, substation bus bars, generators, and large motors.
• Rogowski Coils do not create hazards for personnel with open secondary, as Conventional current transformers.

Specifications :

• Range : Frame 1- Upto 2000AMPS.
• Range : Frame 2- Upto 4000AMPS
• Range : Frame 3- Upto 6400AMPS. 
• Frame 3 is provided with Two Rogowski

Application : 

• Sudden short-circuit testing
• Monitoring arc furnaces
• Lightning test facility
• Monitoring weld quality
• Protection of slip-ring induction motors
• Electromagnetic launchers
• On-line insulation discharge monitoring
• Transient measurements.

Description : 

• ACCL is used for efficient distribution of generator power in high rise apartments, townships, commercial buildings, etc without overloading the generator.
• The ACCL will switch the load to generator supply during failure of mains supply. It also acts as a current limiter when load on generator exceeds the pre-set limit thus avoiding any overload on the generator.

Specifications :

• Unique - patented design - Contactor based ACCL
• Heavy Duty - AC 32A and AC22A utilization category
• Long life - 25000 operations
• Safe - 5 kA short circuit capacity Tested at Third party lab
• Energy efficient - Low Power consumption as coil operates only during DG
• Cool - Low Temp rise as power consumed is less than 0.2VA on EB
• User friendly - even during overload, load will be On for 10 sec so that user gets some time to switch off unwanted loads. Beep & LED indication.
• Proven - Tested at third party (UL LAB)
• Technically sound - Break before make due to higher air gap
• Convenient - Auto Reset Facility
• Versatile - Can be used in new buildings as well as for retrofitting (i.e 2 Sub main or 1 Sub main wiring method)

Salzer Distribution Boards are Aesthetically pleasing and sleek that seamlessly blends with your Interiors. Salzer DB’s are made of CRCA Sheet steel and are rugged in construction and spacious enough to facilitate easy wiring. Salzer has a wide range of DB’s for Residential & Commercial applications. The range includes Enclosures, Plug & Sockets, Single Phase DB’s, Three Phase DB’s, Vertical DB’s, Phase Selector DB’s & Segment DB’s etc.

Features :

• Made of CRCA sheet steel
• Epoxy hybrid powder coating
• Electrolytic Copper Phase links 63 Amps rating
• Neutral & Earth links – Brass
• Suitable for Flush and surface mounting
• Door Earthing feature
• Door Reversible feature
• Zinc plated screws
• Galvanised Din rails
• Cement / Dust guard sheet
• Anti Insertion & Circuit labels provided

Description :

• A dream home conceived to reflect your distinct personality in each and every element that goes into its making.
• Salzer offers an aesthetically created range of Modular Switches, Sockets , Regulators, Plates , Accessories & Speciality products that elegantly suits your Decor.
• Salzer Electronics is the first in India to adhere to RoHS compliance. We offer a contemporary and sleek range of switches that inspires your creativity and fires your imagination. Salzer S90 is a range fine-tuned for ultra-smooth operation. It is designed for switching excellence. We offer switches for all kinds of domestic and workplace applications. Each unit is made of high grade flame retardant polycarbonate material incorporated with total safety features. Switch range includes 10 & 20 Amps with or without neon indication.

Apart from modular switches, we also have to offer switch accessories and speciality switches. Our switch accessories include step regulators, miniature emergency lamps, night light, buzzers, bell indicators and fuse units. Salzer’s speciality range is unmatched in convenience and aesthetics. Whether you’re looking for multi control remote convenience or movement sensors, we have it all.

Specifications : 

• Contemporary & Aesthetically Sleek Modular
• 10, 20 & 32 Amps AC suitable for Standard
• Plates, Elite Plates, Glass Plates & Coloured Plates
• Economy range Switches & Sockets
• Elegant Black colour Switches / Sockets
• Silver Nickel contacts for enhanced Electrical life
• Anti Spark shield & Finger Protected
• Terminals with Captive Screws & Snap fitment Installation

Speciality :

• Aesthetically sleek and sophisticated speciality products viz.
• 4 Channel Remote switches, Touch / Remote switches, Movement Sensors, Motor Starters, Automatic Source Changeovers (ACCL), Timers, Dual Voltage Shaver socket, Key Tag Switches, Surge Suppressor, Universal Remote & other Hotel / Hospitality range of products.

Salzer Movement sensors are ideal for automatic Switching .The sensor Switches ON the appliance connected when it senses any Movement and remains ON for the set period of time (adjustable from 2 to 37 minutes ) when there is No movement it automatically switches OFF the appliance , Salzer Movement Sensors are ideal for Washrooms , Store Rooms , Staircase Lighting , Corridor/ pathway lighting , Garage , Portico’s & other areas of indoor usage . An easy to install fit and forget product that helps save energy and cost

We are among the reputed manufactures and suppliers of remote switches. The switches are applauded by the clients for their easy use and reliability.

Description :

• Each wire is fabricated using 99.97% pure, electrolytic grade, annealed bare copper with more than 100% conductivity.
• The use of copper guarantees electrical energy saving which further reduces electricity bills.
• The wires are also wadded with flame retardant PVC compound, which helps to control the spread of a fire even at high temperature. It also provides protection against electrical shock and short circuit.

Specifications :

• Additional safety and security
• Manufactured using high-grade copper
• 100% conductivity
• Flame-retardant wires
• Provides protection against short circuit

Description :

• High quality enamelled copper wires that are manufactured from 99.97% pure ETP grade copper
• We offer our clients’ high quality enamelled copper wires that are manufactured from 99.97% pure ETP grade copper and insulated with high temperature engineered enamel. It is made as per NEMA standards.
• The offered enamelled copper wires or magnet wires meet all requirements and applications where there is a need to boost manufacturing efficiency. It finds application in AC/DC motors, transformers, alternators, relay coils, white good appliances, pumps, fans, light fittings and other electrical and electronic equipment.

Specifications :

• Manufactured from 99.97% pure ETP grade copper & insulated with high temperature engineered enamel
• Wire ranges from 0.1 mm to 3.0 mm nominal diameter (11 to 42 swg & 9 to 38 awg)
• Insulation range available in grade 1, 2 & 3 as per IEC in single, heavy & triple as per NEMA Available in 130(B), 155(F), 180(H) & 200 classes
• Range from 0.4mm to 2.1mm upto 105 as per IS Standards

Description :

• Manufactured in accordance with IEC, UL and CE standards.
• The flexible bus bars manufactured by us are made in accordance with IEC, UL and CE standards. We offer an extensive range to suit any application.
• The bars are manufactured from 99.997% pure ETP grade annealed bare/ tinned copper strips.
• We at Salzer have formulated a special grade of insulation compound to give it better flexibility and also meet the flammable rating of UL 94VO. It finds application in panel boards, UPS, stabilizers and windmills.

Features :

• Easy bending highest flexibility
• Bending with the smallest radial
• Suitable for drilling or punching
• Shorter for connections and space saving
• RoHS - environmentally friendly
• High di-electric strength
• Higher operating temperature 105°C
• Flexible PVC insulation acc. to UL 758
• Tinned / bare copper strips
• High conductivity electrolytic 99.9%
• 1mm strip thickness

Specifications : 

• Manufactured from 99.997% pure ETP grade annealed bare / tinned copper strips
• Formulated special grade of Insulation compound to give more flexibility and to meet UL94 VO & RoHS Compliant
• Offered with Cutting, Bending, Twisting & with Hole used in Panel Boards, UPS / Stabilizers and Windmills

Description :

• Salzer is equipped with a full-fledged testing laboratory complying with stringent quality benchmarks as per UL, BIS & IEC standards which ensures consistent quality, highly durable and world class wires.
• Salzer LAN Cables are designed to support Hi speed data transmission offering superior performance and reliablity. Our LAN Cables comply and exceeds the requirements specified by TIA/EIA-568.2 -D standards.
• Salzer also specializes in custom-built wires & cables and is a preferred supplier to many leading OEM's and Automotive component manufacturers around the world.

Features :

• Verstaile HDPE Insulation-(Solid, SKin-Foam-Skin)
• Insulation Physical foam technology and Max foaming 60%(Based on product)
• Online monitoring of Insulation for consistent quality
• High accuracy Lay Length and Low Noise level
• 4 pairs or 2*4 twisted pairs, 100
• ANSI/TIA colour code
• Compliant with ISO/IEC 11 801, EN 50173 and ANSI/TIA 568 standards
• Products conforming to the new CPR regulations
• Automatic LF/HF measuring system - fitted with ultra-reliable
• relays or fastest & most consistent Quality.