Our Products
Working Data
Wind Velocity | Temperature |
---|---|
5 kmh | 3oCÂ to 5oC |
10 kmh | 4oCÂ to 7oC |
Details
Size | 28" net 21" mounting |
---|---|
Weight | 6.5 Kg aprrox. |
Speed | Depends on wind |
Blade | Total 36 No. .5 mm Aluminum Blade |
Frame | MS galvanized frame |
Top Cover | Stainless steel |
Ring | Stainless steel |
Mounting | Stainless steel |
Note : Available in aluminum Stainless steel. Powder Coating / Anodizing will be on request. |
Details
Reverting Capacity in Steel (hot)mm | 27 |
---|---|
Blows per minute | 720 |
Approx Weight (kg) | 15 |
Overall Length (rpm) | 660 |
Air Inlet Connection | 1/2" NPT |
Type of Handle | Piston Grip |
Standard Equipment | Chisel Retainer 2 Nos. Rubber Bumpers |
Details
Reverting Capacity in Steel (hot)mm | 24 |
---|---|
Blows per minute | 1320 |
Approx Weight (kg) | 8.6 |
Overall Length (rpm) | 470 |
Air Inlet Connection | 1/2" NPT |
Type of Handle | Piston Grip |
Standard Equipment | Snap Clip |
Details
Model | Type of Handle | Drilling Capacity (mm in Steel) | Free Speed (rpm) | Approx Weight (kg) | Air Consumption (m3/min at 6.33kg/cm2) | Air Inlet Connection | Standard Equipment |
---|---|---|---|---|---|---|---|
D-14(S) | Straight | 6.35 | 3000 | 1.2 | 0.4 | 1/4" NPT | Chuck & key with 3/8" * 24 TPI |
D-14(O) | Offset | 6.35 | 3000 | 1.3 | 0.4 | 1/4" NPT | Chuck & key with 3/8" * 24 TPI |
D-38(S) | Straight | 10 | 3000 | 1.3 | 0.6 | 1/4" NPT | Chuck & key with 3/8" * 24 TPI |
D-38(O) | Offset | 10 | 3000 | 1.3 | 0.6 | 1/4" NPT | Chuck & key with 3/8" * 24 TPI |
Details
Model | Blows per minute | Number of needle per set | Overall Length (rpm) | Approx Weight (kg) | Air Consumption (m3/min at 6.33kg/cm2) | Air Inlet Connection | Standard Equipment |
---|---|---|---|---|---|---|---|
NS-2S | 4200 | 25 | 360 | 2.5 | 0.3 | 1/4" NPT | 1 Set of Hardened alloy Steel needle (3 mm Diameter) |
NS-WCSH | 4200 | 19 | 400 | 3.1 | 0.6 | 1/4" NPT | 1 Set of Hardened alloy Steel needle (3 mm Diameter) |
Details
Model | Blows per minute | Length of Stroke (mm) | Overall Length (rpm) | Approx Weight (kg) | Air Consumption (m3/min at 6.33kg/cm2) | Air Inlet Connection | Accessories |
---|---|---|---|---|---|---|---|
WCSH-42 | 4200 | 25.4 | 257 | 2 | 0.6 | 1/4" NPT | Angle Scalling Chisels Wide Blade Chisels Available at Extra Cost |
Details
Model | Application | Free Speed (rpm) | Wheel Capacity Diameter (mm) | Approx Weight (kg) | Air Consumption (m3/min at 6.33kg/cm2) | Air Inlet Connection | Standard Equipment |
---|---|---|---|---|---|---|---|
BSO-17 | Sanding Only | 17000 | 125 Sanding Disc | 1.1 | 0.4 | 1/4" NPT | Wheel Guard Wheel Collar Wheel Nut Sanding Pads |
ASG-160 | Grinding/Sanding | 6000 | 180 Sanding Disc/180 DC/125 Resinoid Cup | 5.4 | 1.59 | 1/2" BSP | Wheel Guard Wheel Collar Wheel Nut Sanding/Grinding Pads |
ASG-145 | Grinding/Sanding | 4500 | 230 Sanding Disc/230 DC/150 Resinoid Cup | 5.4 | 1.59 | 1/2" BSP | Wheel Guard Wheel Collar Wheel Nut Sanding/Grinding Pads |
Details
Model | Blows per minute | Length of Stroke (mm) | Approx Weight (kg) | Air Consumption (m3/min at 6.33kg/cm2) | Recommended Use | Air Inlet Connection | Accessories (available at extra cost) |
---|---|---|---|---|---|---|---|
CH-21 | 2100 | 76.2 | 6.5 | 0.98 | Low Carbon Alloy Billets Heavy Steel Castings Concrete Chipping | 1/2" BSP | Pneumatic Chisels in Length 6" to 48" |
CH-26 | 2600 | 50.8 | 5.9 | 0.93 | High Carbon Billets Heavy Cast Iron Castings | 1/2" BSP | Pneumatic Chisels in Length 6" to 48" |
CH-30 | 3050 | 25.4 | 5.5 | 0.88 | Heavy Aluminium Medium Cast Iron Medium Steel Castings Removal of Core Sand | 1/2" BSP | Pneumatic Chisels in Length 6" to 48" |
| Yes |