Other Products / Services #1177279

The unit is very useful when it comes to acquiring data from a remote and/or un-attended location with little or no connectivity in terms of broad band /Dialup internet. GSM/GPRS or even PSTN. SPECIFICATION: Serial Interface: RS-232Backup memory: USB Pen Driver (To be attached externally)Operating voltage: 24VDC +/- 20%Status Indicator LEDs: Power & USB activitiesEnclosure: DIN Rail mountDimensions: 75 x 45 x 125 mm (D)

Specifications: No. of Streams: Up to 12Operating Voltage: 110-230 VAC +/- 10%, 1 Phase, 50 Hz NominalKey board: 12 keys keypadDisplay: 7 digit 7-Segment, 0.56" Green/Red LED20 Character x 4 Line LCD with back litDisplay: 16/32 Discrete LEDs for process status IndicationRelays: Stream selection: Up to 8 Relays 2 C/O typeRelay Contact rating: 2A/250 AC, Resistive for each relayAlarm Relays (Optional):Up to 8 Relays 1 C/O typeCommon Alarm (Optional):1 Relay 1 C/O typeStream selection logic: time based and/or external input triggeredDigital Inputs: Up to 4 (Potential free)Analog Inputs: Up to 8 channels, 4 to 20 mAAnalog Output: Up to 16 Channels, 4 to 20 mAMultiple Outputs per stream. S/H type Dimension: Outer: 270 (W) x 133.5 (H) x 260 (D)Cutout: 228 (W) x 133.5 (H)Weight: 6 KgsEnclosure: General purpose, Made up of Aluminum, Panel Mount

Specifications: input: 0-1 vdc, proximity (pnp type)digital inputs: two (potential free contacts)display: 14 digit 7-segment 0.56 red led display organised in three groups. aggregate rate (tons/hour) : 4 digitsconveyor speed (meter/sec) : 3 digitstotal aggregate (tons) : 8 digitsnon-resettable eight digit totaliser (reset possible only thro password)keypad: eight keys membrane keypaddiscrete leds: twopower supply: 230v +/- 10% ac proximity power supply: +24v dc/50 maoutput options: 0 to 10 v dcrelay: one for alarm conditionserial interface: rs232 or rs485 (optional)scaling method: linear (multiplying factors: programmable)warm up time: 10 minutesaccuracy: 0.1% of fs +/- 1 digitenclosure: metalised din standard, panel mounting typedimensions: outer: 144 mm x 144 mm x 120 mmpanel cutout: 138 mm x 138 mmweight: approx. 2 kgs

We offer batch controller. Features: - micro controller based unit - eeprom for data & parameter storage - onboard rtc - operating supply: 230v/110vac - display: 128 x 64 graphics lcd display with backlit - keyboard: 23 keys membrane keypad - input: load cell sensor - excitation voltage: 10vdc - adc: 24-bit adc used for digitization - field programmable parameters: - set points/offset of all component, filter, various timings for batching sequence - control outputs: total 12 relay outputs - seven relays to control feeding of components - alarm, gate on/off - status: batch over, batch ready - digital inputs: 8 digital inputs to read status & remote commands - calibration: offset & span calibration through software using keypad - report: batch wise online & offline report printing - serial interface: rs-232/rs-485 (for printer/computer) - mechanical data: mounting: panel mounting - dimensions: - outer: 269 (w) x 133.5 x 190 (d) - cutout size: 228 mm x 133.5 mm - enclosure: normal

We offer load cell amplifier and transmitter. Specifications:this is a din rail mount unit. It can be field mounted near load cell. As signal is amplified and than transmitted from field, it drastically reduces chances of noise pick up. Output of the amplifier is linearly proportional to weight applied on the sensor. O operating voltage: 110/230 vaco input: load cello excitation voltage: 10vdco output: 0-20 ma/4-20ma/0 to 1vdc/0-10vdc/0-5vdc (factory configured)o enclosure: din rail mounting type, plastico mechanical dimension: 112 mm x 88 mm x 76 mmapplications:o weighing systemso tension measurement systems

We offer we offer 422 converter. Specifications:- - power supply: 110/230vac, 50 hz or +5vdc- rs-232 interface: 3-wire- rs-485 interface: 2-wire or 4-wire- galvanic isolation of 1kv between rs-232 and rs-485/422 signals- supports high speed communication- supports 32 nodes on rs-485 side- enclosure: din rail mounting- dimension:- outer: 70 mm (w) x 60 mm (h) x 111 mm (d) - it is recommended to use twisted shielded pair of cable for connecting on rs485 side- this device is very useful for inter connecting field instruments, plc, pc, hmi etc.

We offer concrete controller a micro-controller based batch control unit. Specification:onboard rtcoperating supply: 110-230v ac/24vdcdisplay: 128 x 64 graphics lcd display with backlit/240 x 128 graphics lcd25, 40 discrete leds for process status indicationkeyboard: 20 keys membrane keypadanalog inputs: four channels for loadcell. excitation voltage: 5vdcpulse inputs: for water feeding thro water meterfield programmable parameters: set points/offset of all component, filter, various timings for batching sequencecontrol outputs: up to 24 relay outputso control of component feeding gateo discharge, alarm, mixer gate on/offo status: batch over, batch readydigital inputs: up to 24 digital inputs to read status & remote commands: auto/manual/semi auto switch, bucket top/bottom, start, stop commandscalibration: offset & span calibration through software using keypadreports: batch wise online print, offline print, summary print, recipe print etc. serial interface: rs-232/rs-485 (for printer/computer)mechanical data: mounting: panel mountingdimensions:o outer: 303 (w) x 243 (h) x 170 (d) mmo cutout size: 265 (w) x 223 mm (h)

We offer protocol converter. Main features: this is microcontroller based unit. the unit continuously receives data on rs-232 serial port in ascii format. as per pre-defined logic, converts this data and organize as a list of registers. set of data stored in these temporary registers can be accessed using modbus protocol thro rs-485 port or tcp/ip port. unit ip address is programmable. user can also configure serial interface settings (data rate, parity etc.) other features: operating voltage: 24 vdc +/- 20% din rail mount enclosure led indication for power status and communication activities enclosure: abs material colour: grey mechanical dimensions: 55 (w) x 75 (h) x 109.5 (d) mm mounting: rail mounting or wall mounting