Expansion engine

Listing ID #4604900

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier

Preferred Buyer From : All over the world

The Electric Motor is used initially to start the machine. Thereafter the engine is moved by the air pressure itself and during which time, the engine motor retains the speed by acting as a brake. Since work is done by air in rotating the Flywheel, it loses its heat content (enthalpy). Thus the air gets cooled. This cooling is more than that of an expansion in an expansion valve.The Expansion Engine can be considered as three major units:a. The drive unit.b. The Cylinder Unit for air expansion andc. The Hydraulic Systems for operating the Valves.

View More Details

Send Enquiry

Product Details

TECHNICAL DATA	SANGHI-ORG 80	SANGHI-ORG 100	SANGHI-ORG 200	SANGHI-ORG 300
Type of Expansion Engine	SEM 0.5/1	SEM 0.5/1	SEM 0.5/1	SEM 0.5/1
No. of Cylinders	1	1	2	2
Diameter of Cylinder Bore	70 mm	80 mm	85 mm	90 mm
Piston Stroke	125 mm	125 mm	125 mm	125 mm
Speed	210 RPM	210 RPM	210 RPM	210 RPM
Inlet Air Pressure	60 kgs/cm2	60kgs/cm2	60kgs/cm2	60kgs/cm2
Outlet Air Pressure	5 kgs/cm2	5 kgs/cm2	5 kgs/cm2	5 kgs/cm2
Throughput Volume at 60 kgs/cm2 and 80 C (about)	300 Ncu.m./Hr	400 Ncu.m./Hr	560 Ncu.m./Hr	828 NM3./Hr
Throughput Volume at 50 kgs/cm2 and -750 C (about)	120-390 Ncu.m./Hr	200-400 Ncu.m./Hr	400-560 Ncu.m./Hr	550-830 NM3/hr.
Inlet Valve opening time cam setting position	8	8	8	8
Power required or supplied	7.5 KW	7.5 KW	15 KW	30 KW
Piston Head Clear	1.2 - or + 0.2 mm	1.2 -or + 0.2 mm	1.2 -or + 0.2 mm	1.2 + 0.2 mm
Inlet Valve Pestel Clearance	0.4 to 0.5 mm	0.4 to 0.5 mm	0.4 to 0.5 mm	0.4 to 0.5 mm
Outlet Valve Pestel Clearence	0.3 to 0.4 mm	0.3 to 0.4 mm	0.3 to 0.4 mm	0.3 to 0.4 mm

Company Details

SANGHI ORGANIZATION, the Engineering Division of M. K. Sanghi Group of Companies commenced manufacture of Industrial Gas Plants for producing Oxygen, Nitrogen and Acetylene Gases in the mid 80's. The Company has a sprawling manufacturing complex in Taloja near Bombay. The present range of manufacture of the Company include Oxygen Plant ranging from capacities 40 Cu.m. per hour to 1000 Cu.m. per hour, Nitrogen Plant ranging from capacities 60 Cu.m. per hour to 1000 Cu.m. per hour and Acetylene Plant of capacities 45 Cu.m. per hour and 200 Cu.m. per hour and Nitrous Oxide Plant 8 cu.m./Hr to 24 cu.m./Hr.
Mr.Mahendra Kumar Sanghi is the Chairman and Managing Director of the Group. He is supported by his sons Vaibhav Sanghi and Ashwin Sanghi.
Liquid Oxygen Pump
Vaibhav Sanghi
The Oxygen/Nitrogen Plants being medium pressure plants, consume very low electricity. Beside this advantage, our plant can also simultaneously produce a good commercial grade of Nitrogen Gas without any additional manufacturing cost. The other salient features are : a versatile Liquid Oxygen Pump, sturdy design absorbed from a leading German manufacturer, long operative life, etc. The regularly consumed spares/components are available ex-stock from our Taloja Works and ensure trouble free operation of the Plant.
The Acetylene Plants manufactured by SANGHI ORGANIZATION conform to IS-8471 (PART-IV) 1977. We are approved by the Bureau of Indian Standards and Dept. of Explosives, Nagpur. The Pressure Control and MERCOID Switches fitted to our Acetylene Generator are imported from USA as original equipment. All the above features make our plant, the safest and most economically viable in these capacities.
Liquid Oxygen Pump
Ashwin Sanghi
The SANGHI ORGANIZATION range of Industrial Gas Plants are operating in various countries such as Malaysia, Indonesia, Iran, Sharjah, Abu Dhabi, Qatar, Mauritius, Gambia, Nigeria, Dubai, Syria, Uganda, Tanzania, Argentina, Peru, Ecuador, Sultanate of Oman, Saudi Arabia, Nepal, Honduras, Kenya, Chile, Cyprus, Egypt, Ghana, Guatemala, Portugal, Romania, Sri Lanka, Zimbabwe etc.
Mr.Vaibhav Sanghi, Director is very optimistic about the dominant role that can be played by the company in supplying medium pressure plants in the developing economies of the world. Our plants are ideal for entrepreneurs and for industries that have regular requirement of oxygen and acetylene gases.
The company has an in-house R & D Wing which constantly review the designs and regular upgradation of the manufacturing process is carried out. The Company is in the threshold of doubling the export turnover in the current financial year.