Kleanchute Debris Chutes are made from High Molecular High Density Polyethylene (HMHDPE) and are offered in much higher thickness than other leading chutes. The hoppers are made with galvanized steel for extended life and use in cities where corrosion levels are normally higher. In tropical climates where humidity and therefore corrosion levels are high, HDPE provides a distinct advantage of being a high durable plastic. Further the abrasion levels of HDPE is several times superior to metal and cheap drums and therefore offers multiple use of the same chute at different projects.

Features of the Kleanchute Debris Chutes:
Large 24" Inside Diameter
Thicker, More Resilient HDPE
High Abrasion Resistance
Higher thickness for longer life.
Safe, Easy, And Quick To Install
Pays For Itself In 2 To 3 Uses
Extremely Flexible System
Hardware Is Galvanized
Sections Are Telescopic For Ease Of Storage And Transport
Intermediate Intakes Can Be Easily Placed Anywhere Along Chute

Application areas:

Roofing
Renovation
New Construction

Complete System For Your Every Need:
Window / parapet mountable
Scaffold Mountable
Flat Roof Mountable

Standard Accessories include:
Telescopic HMHDPE 24" chute body
Floor Intake Hopper
Holding Frame Bracket
Galvanized Rods for floor connections

We also offer chutes constructed from HDPE pipes suitable for building up to 100 floors

Features & advantages of Novathene PE Sheets:
High Strength & Stiffness
Low Specific Weight
UV stabilized
Outstanding Flexibility
Good Low temp Resistance
Good Abrasion resistance
Weathering Resistance
High Chemical Resistance
Low Thermal Conductivity
Protection from Stress Cracking
Non Toxic & low water absorption
Long Life and Durability
Excellent Weldability
Easy Installation / Skill Availability
Machined parts
Geomembrane sheets
Storage tanks and vesselsTransport Containers

Cover Strips, Baffles, Stack Seperators
Electrical Engineering
Corrosion Protection Seals;
Gearwheels
Textile cans
Housing
Grips
Liner for Gas Lines, other Lining jobs
Manholes
Orthotics and Prostheses
Chemical Flooring
Geo Thermal Applications; Insulation

Chemical Storage
Filtration Systems, pickling tanks
Etching Tanks, Fabrication Works
Fume Extractors / FRP Lining
Office Stationery
Thermoforming plastic parts
Industrial Flooring
Orthotics and prosthetics
Shipbuilding machinery
Corrosive fume exhaust systems
Engineering Components
Point of Display
Semiconductor equipment
FRP Lining Fabrication
Chemical industry.
Electroplating plants

NovaLene-H Sheets are made from Advanced Grades of PP primarily to suit applications of high temperature or high chemical corrosive conditions. PP-H is exceptionally resistant to strong acids even at high temperatures and also highly resistant to alkalis & oxidizers. It can be welded & thermoformed, has a high strength-to-weight ratio, easy to fabricate, economical, & a long track record of success for the manufacture of tanks, tank hoods, ducts, scrubbers, accessories etc. It is a preferred materials of choice for quality engineering plastic component fabrication. We offer a full range of piping systems from the same raw material.

Features & advantages of NovaLene-H PP-H Sheets:

Excellent Chemical Resistance
High Thermal Resistance
Excellent Fusion Capabilities
Homogenous structure
Excellent Fatigue Resistance
High Impact Strength
High Stress Crack Resistance
Low density, Low weight
Excellent Dielectric properties
Good Elasticity
Non Toxic, Food Grade
Good Thermal insulation

NovaStrong is made from UHMW-PE, a subset of the thermoplastic -polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million, strengthening intermolecular interactions resulting in highest impact strength of any thermoplastic, very low coefficient of friction, self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of Polyamide and Acetal, and is comparable to that of PTFE, but UHMWPE has better abrasion resistance than PTFE.

Features & advantages of NovaStrong UHMW-PE Sheets:

High Abrasion Resistance
Low Specific Weight
Low water absorption
Odorless
Good Low temp Resistance
Low Coefficient of Friction
High chemical resistance
High Impact Strength
Food Safe
Protection from Stress Cracking
Weathering Resistance

NovaFab Sheets are Engineering Plastics sheets which are backed with a polyester or glass fabric layer on one side during the production process. The bondng of the fabric to the sheet is of excellent quality as the fabric incorporates itself into the sheet while it is still hot. The peel strength thus provided is very strong. The dual layer construction sheets are used in a variety of applications primarily where Fibre Reinforcement is required, the sheet acts as a liner. Decorative cloths are also available for fancy thermoformed items or orthopaedic articles for children.

Features & advantages of NovaFab Fabric backed Sheets:
Good peel strength due to heat bonding
Ease for direct Fibre Reinforcement
Original properties of base plastic available for chemical resistance
Decorative options available
Final FRP reinforcement gives component good mechanical strength
Glass & polyester backed options available

NovaTherm ABS sheets are made from Acrylonitrile Butadiene Styrene (ABS) which is the polymerization of Acrylonitrile, Butadiene, and Styrene monomers. Chemically, this thermoplastic family of plastics is called "terpolymers", in that they involve the combination of three different monomers to form a single material that draws from the properties of all three. ABS possesses outstanding impact strength and high mechanical strength, which makes it so suitable for tough consumer products. Additionally, ABS has good dimensional stability and electrical insulating properties.

Features & advantages of NovaTherm ABS Sheets:
Can be easily thermo or pressure formed, sheared, sawed, drilled, cold stamped
Weldability ultrasonic / thermo / chemically
Excellent impact resistant
High strength & durability
Good machinability
Good electrical properties
High mechanical Strength

NovaRene PS Sheets are made from polystrene which is an aromatic polymer made from aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic. Solid polystyrene in forms of sheets etc is used, for e.g, in disposable cutlery, plastic models, CD and DVD cases, and smoke detector housings. The two different grades of PS , GPPS and HIPS offer a variety of solutions and are chosen depending on impact resistance required in the sheets. High impact polystyrene can be assembled with mechanical fasteners, solvents, or adhesives. HIPS is FDA compliant for use in food processing.

Features & advantages of NovaRene HIPS Sheets:
Low cost
Easily Printable
Easy to assemble with adhesives or solvents
Outstanding thermoforming characteristics
Good machinability
High impact strength with HIPS
Non Corrosive
Textures available
Semi Transculent with good lumniscence values available

Features & advantages of NovaRex PVC Rigid Sheets:
Strong and durable
Good Thermal insulation
Good Dimensional Strength
Good Electrical insulation
Fire Retardant Properties
Good Chemical Resistance
Low Moisture Absorption
Easy to join using Solvent Cement
Easy to weld like other thermoplastics
Wide skill / experience availaibility for fabrication acitivties
FDA compliant

Features & advantages of NovaKyn PVDF Sheets:
Mechanical strength & toughness
High thermal stability
High dielectric strength
Exceptional outdoor weather resistance
Total inertness to UV radiation
Low permeability to most gases & liquids
Low flame & smoke characteristics
High abrasion resistance
Very low creep; High purity
Resistance to most chemicals & solvents (PH1 to PH14)
Resistance to nuclear radiation
Fungi resistant

Kleanchute Debris Chutes are made from High Molecular High Density Polyethylene (HMHDPE) and are offered in much higher thickness than other leading chutes. The hoppers are made with galvanized steel for extended life and use in cities where corrosion levels are normally higher. In tropical climates where humidity and therefore corrosion levels are high, HDPE provides a distinct advantage of being a high durable plastic. Further the abrasion levels of HDPE is several times superior to metal and cheap drums and therefore offers multiple use of the same chute at different projects.

Features of the Kleanchute Debris Chutes:
Large 24" Inside Diameter
Thicker, More Resilient HDPE
High Abrasion Resistance
Higher thickness for longer life.
Safe, Easy, And Quick To Install
Pays For Itself In 2 To 3 Uses
Extremely Flexible System
Hardware Is Galvanized
Sections Are Telescopic For Ease Of Storage And Transport
Intermediate Intakes Can Be Easily Placed Anywhere Along Chute

Application areas:

Roofing
Renovation
New Construction

Complete System For Your Every Need:
Window / parapet mountable
Scaffold Mountable
Flat Roof Mountable

Standard Accessories include:
Telescopic HMHDPE 24" chute body
Floor Intake Hopper
Holding Frame Bracket
Galvanized Rods for floor connections

We also offer chutes constructed from HDPE pipes suitable for building up to 100 floors

Features & advantages of Novathene PE Sheets:
High Strength & Stiffness
Low Specific Weight
UV stabilized
Outstanding Flexibility
Good Low temp Resistance
Good Abrasion resistance
Weathering Resistance
High Chemical Resistance
Low Thermal Conductivity
Protection from Stress Cracking
Non Toxic & low water absorption
Long Life and Durability
Excellent Weldability
Easy Installation / Skill Availability
Machined parts
Geomembrane sheets
Storage tanks and vesselsTransport Containers

Cover Strips, Baffles, Stack Seperators
Electrical Engineering
Corrosion Protection Seals;
Gearwheels
Textile cans
Housing
Grips
Liner for Gas Lines, other Lining jobs
Manholes
Orthotics and Prostheses
Chemical Flooring
Geo Thermal Applications; Insulation

Chemical Storage
Filtration Systems, pickling tanks
Etching Tanks, Fabrication Works
Fume Extractors / FRP Lining
Office Stationery
Thermoforming plastic parts
Industrial Flooring
Orthotics and prosthetics
Shipbuilding machinery
Corrosive fume exhaust systems
Engineering Components
Point of Display
Semiconductor equipment
FRP Lining Fabrication
Chemical industry.
Electroplating plants

NovaLene-H Sheets are made from Advanced Grades of PP primarily to suit applications of high temperature or high chemical corrosive conditions. PP-H is exceptionally resistant to strong acids even at high temperatures and also highly resistant to alkalis & oxidizers. It can be welded & thermoformed, has a high strength-to-weight ratio, easy to fabricate, economical, & a long track record of success for the manufacture of tanks, tank hoods, ducts, scrubbers, accessories etc. It is a preferred materials of choice for quality engineering plastic component fabrication. We offer a full range of piping systems from the same raw material.

Features & advantages of NovaLene-H PP-H Sheets:

Excellent Chemical Resistance
High Thermal Resistance
Excellent Fusion Capabilities
Homogenous structure
Excellent Fatigue Resistance
High Impact Strength
High Stress Crack Resistance
Low density, Low weight
Excellent Dielectric properties
Good Elasticity
Non Toxic, Food Grade
Good Thermal insulation

NovaStrong is made from UHMW-PE, a subset of the thermoplastic -polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million, strengthening intermolecular interactions resulting in highest impact strength of any thermoplastic, very low coefficient of friction, self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of Polyamide and Acetal, and is comparable to that of PTFE, but UHMWPE has better abrasion resistance than PTFE.

Features & advantages of NovaStrong UHMW-PE Sheets:

High Abrasion Resistance
Low Specific Weight
Low water absorption
Odorless
Good Low temp Resistance
Low Coefficient of Friction
High chemical resistance
High Impact Strength
Food Safe
Protection from Stress Cracking
Weathering Resistance

NovaFab Sheets are Engineering Plastics sheets which are backed with a polyester or glass fabric layer on one side during the production process. The bondng of the fabric to the sheet is of excellent quality as the fabric incorporates itself into the sheet while it is still hot. The peel strength thus provided is very strong. The dual layer construction sheets are used in a variety of applications primarily where Fibre Reinforcement is required, the sheet acts as a liner. Decorative cloths are also available for fancy thermoformed items or orthopaedic articles for children.

Features & advantages of NovaFab Fabric backed Sheets:
Good peel strength due to heat bonding
Ease for direct Fibre Reinforcement
Original properties of base plastic available for chemical resistance
Decorative options available
Final FRP reinforcement gives component good mechanical strength
Glass & polyester backed options available

NovaTherm ABS sheets are made from Acrylonitrile Butadiene Styrene (ABS) which is the polymerization of Acrylonitrile, Butadiene, and Styrene monomers. Chemically, this thermoplastic family of plastics is called "terpolymers", in that they involve the combination of three different monomers to form a single material that draws from the properties of all three. ABS possesses outstanding impact strength and high mechanical strength, which makes it so suitable for tough consumer products. Additionally, ABS has good dimensional stability and electrical insulating properties.

Features & advantages of NovaTherm ABS Sheets:
Can be easily thermo or pressure formed, sheared, sawed, drilled, cold stamped
Weldability ultrasonic / thermo / chemically
Excellent impact resistant
High strength & durability
Good machinability
Good electrical properties
High mechanical Strength

NovaRene PS Sheets are made from polystrene which is an aromatic polymer made from aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic. Solid polystyrene in forms of sheets etc is used, for e.g, in disposable cutlery, plastic models, CD and DVD cases, and smoke detector housings. The two different grades of PS , GPPS and HIPS offer a variety of solutions and are chosen depending on impact resistance required in the sheets. High impact polystyrene can be assembled with mechanical fasteners, solvents, or adhesives. HIPS is FDA compliant for use in food processing.

Features & advantages of NovaRene HIPS Sheets:
Low cost
Easily Printable
Easy to assemble with adhesives or solvents
Outstanding thermoforming characteristics
Good machinability
High impact strength with HIPS
Non Corrosive
Textures available
Semi Transculent with good lumniscence values available

Features & advantages of NovaRex PVC Rigid Sheets:
Strong and durable
Good Thermal insulation
Good Dimensional Strength
Good Electrical insulation
Fire Retardant Properties
Good Chemical Resistance
Low Moisture Absorption
Easy to join using Solvent Cement
Easy to weld like other thermoplastics
Wide skill / experience availaibility for fabrication acitivties
FDA compliant

Features & advantages of NovaKyn PVDF Sheets:
Mechanical strength & toughness
High thermal stability
High dielectric strength
Exceptional outdoor weather resistance
Total inertness to UV radiation
Low permeability to most gases & liquids
Low flame & smoke characteristics
High abrasion resistance
Very low creep; High purity
Resistance to most chemicals & solvents (PH1 to PH14)
Resistance to nuclear radiation
Fungi resistant