Post Buy Requirement
ST
Kurnool, Andhra Pradesh, India
Add Review

Our Products

  1. Automobile Repair Tools & Equipment 11 Products available
  2. Industrial Jacks, Lifts & Winches 3 Products available
  3. Weighing Scales & Measuring Tapes 9 Products available
  4. Automobile Garage Equipment 5 Products available
  5. Air Compressor 3 Products available
  6. Elevators 9 Products available
  7. Battery Chargers 3 Products available
  8. Others 25 Products available

Other Products / Services #4568467

Hydraulic Press

Hyderaulic Press With shock Proof gaugeCapacity: 20 Ton 30 TonStroke(mm):145Max. Working Range (mm):1035 With shock Proof gaugeCapacity: 20 Ton 30 TonStroke(mm):145Max. Working Range (mm):1035
View Complete Details

TyreSafe NITRO-10 Nitrogen Generator

Nitrogen Generator for Cars, LCV's & Motorcycles Fully non corrosive aluminium extruder tower & valve manifold provide uncontaminated nitrogen gas.Automatic nitrogen generation on demand.Inbuilt nitrogen storage tank.Highly efficient CMS for consistent purity & long life.Micro processor board for highest reliability.Pressure based automatic vacuuming ensures noair in the tyre during first time nitrogen fill.Inbuilt "Tyre counter", "Hour Meter" helps better monitoring.Independent LED display for "Tyre pressure" & "Set pressure".Mimic display for "N2 Generation", "lnflation", "Deflation", "Vacuuming", "Complete PSI & bar".Separate key for "Flat tyre" inflation.
View Complete Details

ST-IP400 Infrared Paint Heater

Infrared Paint Heater for Cars & LCV's Very short drying time only 5 - 15 mins.Ground ash heating time : 8 mins, Priming heating time : 10mins, Surface heating time : 15mins.Used to dry spray paint on partial of car bodyConvenient time and cost saving.Good ability of heat elimination prolongs device working time.Environment protect and energy saving
View Complete Details

Finger Tools

  • Brand Name Sarv
  • Size 45mm long
  • Weight 36gms
  • Use Set of 4 metal claws suitable for steel & alloy rims.
  • Code 550218
  • Dia 10 mm
View Complete Details

STHVWash3P HCV Buses Washer

Technical Data No of Plungers 3 Output Per Gun 12 LPM Working Pressure 110 Kgsq-cm Hose Length 10 m Motor 5HP
View Complete Details

Mechanical Tool Trolley

Sleek desing with 34nos. drawers & 1 no.cabinetfor extra Storage on rollers Provided with lock Sleek desing with 34nos. drawers & 1 no.cabinetfor extra Storage on rollers Provided with lock
View Complete Details

STGas-06 Exhaust Gas Analyser

For testing emissions from a Petrol Vehicle. Measures CO, HC and CO2 in automotive emission by the principle of non-dividing infrared absorption.Equipped with gas bench with an embedded microprocessor. Liquid crystal display and English interface.Inductive RPM (engine-speed) measuring pliers, oil temperature.Printers and Sensors Optional.
View Complete Details

STWash-1P/3P Car Washer

Technical Data STWash-1P STWash-3PType Reciprocating ReciprocatingNo of Plungers 1 3Plunger Dia xStroke Length 40mmx60mm 35mmx22mmWorking Pressure 25Kgcm2 Max 18Kgcm2MaxCrankcase oilCapacity Min. 300 mlMax. 400 ml 1.5 LtrsMotor 3Hp 3Hp
View Complete Details

STSmoke-100 Diesel Smoke Meter

Diesel Smoke Meter for Cars &LCV High quality microprocessor based instrument with combines optical precisionFree moving trolley for easy mobility.Option of adding Non Thermal Paper Printer for printing a record of the test results.One of the most outstanding features of this equipment is its ability to operate on 220V AC or a 12DC vehicle battery.
View Complete Details

ST-PC400 Plasma Cutting Machine

Plasma Cutting Machine for Cars & LCV's Constructed using latest inverter Technology.Offers high energysavings and higher efficiency.Electronic regulation of cutting current.Control and gauge for the presence of compressed airflow and thermostatic protection.
View Complete Details

ST-MW400 Mig-Mag Welding

Mig-Mag Welding for Cars & LCV's Constant voltage rectifier type power source suitable for dip spray transferwelding.Separatewirefeedunitforgreaterareaof operation.Excellent portability & mobility.Customized according to the requirements.Standard ammeterand voltmeter.Outstanding forwelding with mixed Gases.
View Complete Details

STL-SPC10 Spark Plug Tester

Spark Plug Tester & Cleaner for Cars & LCV's Separate plug Cleaning chamber consisting of an abrasive system connected to double acting valve for blasting and subsequent cleaning to remove the abrasive and dust.Different rubber adopters provided for cleaning plugs of 10mm, 12mm, 14mm and 18 mm sizes.Twin testing chamber connected to the compressed air system for charging the chamber with the necessary control device.Pressure Regulator is provided for reducing any excess air and releasing pressure in the chamber.
View Complete Details

ER-70SE Professional Balancer With Touch Screen Video- Cemb,Ital

Wheel Balancer for professionals studied to ease the operator job.Lock of the wheel in the correction position by means of an electromagnetic brake.Led light to illuminate the working space inside the rim.AUTOMATIC WEIGHT POSITIONING BY LASER Laser spotter indicating the correct axial position for application of stick-on weights inside the rim.New extended gauge for diameter and distance measurements of rims up to 28 with automatic locking on correction planes.Innovative Touch ScreenStandard equipped with LA Sonar for automatic measurement of wheel width. Available in two versions: manual locking and pneumatic locking.
View Complete Details

Satellite Equipment

SPACE s.r.l. is located in Trana (TO) and belongs toan Italian industrial group of companies producing automotive tools. In the group, SPACEs.r.l. specializes in the development and manufacture of electronic products applied to garage equipment and employs more than 30% of the workforce of the research sector. SPACEs.r.l. produces high quality products, innovative, reliable and easy to use and thanks to this fact, SPACE srl could reach in a few years, a significant presence in over 40 countries around the world. The quality certification system according to UNI EN ISO 9001-2008 is a confirmation of the ability to design, manufacture and after sales service of SPACE srl. The quality of the training is a key strategy in SPACE srl. The training courses for technicians and sales staff are held in the Training Center specifically created at the plant SPACE, which includes a demonstration room. The Test Lanes of SPACE are approved by the ministry of transport in many countries, such as Italy, France, UK, Netherlands, Russian and Hungary. Collaboration with other companies of the group allows SPACE srl to offer its customers a complete range of garage equipment auto repair and tire service, such as
View Complete Details

Sarvstraight-10 Die Rim Straightener

Rim Straightener for Cars & LCV's 10 Die Rim Straightener is designed for heavy load workshops.It can quickly repair the bent edges and wobbling of MS Rims with lathhydraulic action.It adopts heavy duty reduction gear box with thrust bearings to take heavy starting force and eliminate the vibrations during the straightening operation.
View Complete Details

Sarvstraight-14 Die Rim Straightener

Rim Straightener for Cars & LCV's 10 Die Rim Straightener is designed for heavy load workshops.It can quickly repair the bent edges and wobbling of MS Rims with lathhydraulic action.It adopts heavy duty reduction gear box with thrust bearings to take heavy starting force and eliminate the vibrations during the straightening operation.
View Complete Details

STL-FICT10 Computerized Injector Cleaning Machines

Fuel Injector Tester & Cleaner for Cars & LCV's Machine can perform cleaning & testing of all type of top feed and side feed multipointmonosingle point fuel injectors for all type of MPFI vehicles.Machine can operate either on 230V 10% or 12 v DC@ 15 Amp. battery supply.Machine will give ALARM at the end of each cleaning & resting Operation.Any Operation can be HOLD at any time during cleaning & Testing.Machine will depressurized the rail after cleaning & testing byDRAIN key to avoid any wastage of chemical.Utility Drawer at base for keeping spares.
View Complete Details

ST-SW400 Spot Welding Machine

Spot Welding Machine for Cars & LCV's The most common application of spot welding is inthe automobile car manufacturing industry, where it isused to weld the sheet metal to form a car body andother parts. Spot welding is the most commonly usedform of resistance welding. Useful for higherstrength and productivity in manufacturing andrepair.
View Complete Details

ST-EDM10 Engine Decarbonizer

Engine Decarbonizer for Cars &LCV's This is Micro controller based fully Automatic machine.Machine can Decarbonize and petrol Diesel Engine of all type of automobile vehicle.Different detachable adapters for connecting machine with vehicle make it much easier for operationDigital Timer is provided for easy operation control of machine.Machine can be operated either on 230 VAC 10% or 12 VDC @ Amp.Battery Supply.Heavy Duty Operating Switches given for maintenance free operationQuick Release Couplers (QRC) are provided at the end of connecting pipes to avoid chemical spillageMachine will sounds up Buzzer at the end of Decarbonizing processlTransparent oil Level Indicators Available on each TankMachine will stop pump in case of Low Chemical Level for pump safety
View Complete Details

STBeam-100 Head Light Beam Tester

Head Light Beam Tester for Cars & LCV's Equipment used for checking the headlights , Luminous Intensity , Elevation and Optic Axis Deviation on automobiles.Equipped with additional battery.LCD ScreenAutomatically Indicates the adjustment direction.Easy to operate.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • S. Mohan Krishna (Sarveshwari Technologies Limited)
  • No. 3-3, Plot No. 76, Santosh Nagar, Kurnool, Andhra Pradesh - 518003, India
  • Share us via