Our Products
Emotron TSA soft starters take motor control to a new level. Soft torque starting, intelligent load monitoring and smart stops are all included and accompanied by a robust and compact design. By developing the Emotron TSA range of electronic soft starters CG has taken a major step towards the ideal motor controller for applications where variable speed is not required. You simply get everything except variable speed!
Vertical In-Line pumpsdesigned for minimum space requirement with easy Installation.
Coupled with TEFC motor with F class insulation with temperature rise limited to class B.
Features :
Volute & adapter fitted with Bronze wear-ring
Suitable up to 110o C water with special mechanical seal
Capacity up to 1400 LPM
Head up to 30 meters
Applications :
Closed Loop Water Circuits
Industrial Water Supply
Cooling Towers
Air Conditioning Plant
Cold Storage Plant
Sprinkler System
These Pumps have a Horizontal back pull out design as per ISO 2858 / ISO 5199, suitable for 16 bar pressure, with a Capacity up to 400 m3/hr at 1450 RPM. Sizes from DN 32 to 150 mm Flanges as per ASME (formerly ANSI) B16.1 High efficiency due to superior design Replaceable wear rings - Eliminates casing wear, permit easy maintenance of proper running clearances for maximum efficiency.
Features :
Efficient operation
Low NPSHR.
Vibration free performance.
Optimum pump solution.
Lower power consumption.
Minimum maintenance cost.
Minimum downtime.
Various configurations.
Interchangeable parts.
Petra lift machineunits of substantial construction, combining rigidity and compactness in a single traction unit with monobloc gearbox casing that houses motor, brake, sheave pulley etc.
Transmission of power through hydro kinetic energy in the stream of oil / water between the Impeller & Runner ot the coupling. Fixed quantity of oil is used in the working circuit and delivers fixed speed on the output side.
These are self-priming non-clog pumps with a semi open impeller for handling solid & mixture, where priming is required during installation only.
Features :
Easy maintenance with interchangeable parts.
Capacity - up to 4310 LPM
Head up to 36 meters
Temperature up to 65 C
Available as :
Compact mono-set construction
Coupled set
Bare pumpss
Pressure Boosting Pumpsystems help to maintain a constant set pressure in the delivery pipeline. As soon as the set pressure in the pipeline drops, the pump will start, and will stop once the pressure is achieved.
Applications :
Water supplied by a municipality
Distance is too far away from the main supply
More pressure needed because of the particularity of an installation.
Why PBS ?
No overhead (Roof top) tank required.
Guaranteed constant pressure in every tap.
No complex piping required.
Auto On/Off, Dry run and other controls avoid manual Interaction to operate the pump.
Massive power saving as the pumps are operated only as per water requirement.
VFD controls to start and stop the pumps results better performance
Easy to maintain.
Efficient use of energy enables commercial and industrial facilities to minimize production costs, increase profits, and stay competitive. The majority of electrical energy consumed in most industrial facilities is used to run electric motors. Energy-efficient motors now available are typically from 2 to 6 percent more efficient than their standard counterparts. This efficiency Improvement translates into substantial energy and money savings.We offer an entire range of Crompton Greaves energy efficient motors as per the latest IEC, IS & NEMA standards and also complies with the efficiency norms of each geographies.
Industrial pumpsare designed and manufactured for optimum efficiency to suit a wide range of commercial and industrial applications.
Features :
Compact size
Stainless steel sleeve for less shaft wear
Shaft sealing Gland packing & Mechanical seal
Pump with CI, Bronze & Stainless steel internals
Range :
Head 6 Meters to 69 Meters
Discharge 110 LPM to 2140 LPM
Max Motor HP 30 HP
Range :From 0.12 kW to 90 kW
Sizes :From 0.12 kW to 90 kW
Type :Co-axial MI and MS Series
Type :Packaging, Mixing, Conveyor, Cranes, etc.
Industries :Food Processing, Material Handling, Paper, Sugar, Cement, Pharmaceuticals, etc.
Industries :Sugar, Cement, Paper, Solvent Extraction, Rubber, Steel, Power Plants, Mines and Minerals, Chemical
We offer wide range ofCrompton Greaves Low Voltage motorsin Cast iron and Aluminum constructions conforming to International Electro technical Commission (IEC) and NEMA MG1 Standards , We also offer custom builtCrompton Greaves motorswith complete solutions , engineered for special and critical applications.
Crompton Greaves has the largest manufacturing range of low voltage motors suitable for hazardous area. These motors are designed to suit the ignitable atmospheres present in hazardous Locations such as Zone1, Zone 2 or Class1 Div 1 and 2.