Pune, Maharashtra, India
Our Products
The Turbo family takes square shoulder milling to the max. Suitable for most roughing, semi-finishing and finishing operations, these highly versatile cutters offerlong tool life and high precision via optimized properties that reduce heat generation and cutting forces.
The tools featurea coated, pre-hardened cutter body with two different pitch configurations for meeting tight tolerances and providing high reliability in a broad range of workpiece materials. Not only does this coated/hardened surface protect the tool from wear, it also prevents chips from welding on the cutter body.
Turbo cutters have precision milled pocket seats that improve run-out, stability and tool life by providing optimal contact between the tool body and insert. Integrated through-coolant channels support high productivity and promote excellent chip evacuation.The comprehensive range of inserts, carbide grades and corner radii available for use with Turbo cutters further increase their adaptability, accuracy and reliability. Inserts can be set to a true 90-degree cutting angle to create clean 90-degree walls and eliminate secondary operations. Inserts lock into place via a strong center screw placed in the same direction as cutting forces, and wiper flats optimize surface finishes. Such versatility also makes it possible for Turbo cutters to excel in slotting, ramping, facing, pocketing, plunging and turn milling operations.
Mounting types for the Turbo family include Cylindrical, Weldon, Arbor and Combimaster.
Made for roughing and semi-finishing operations, the Square T4 features four cutting edges and an innovative tangential cutter design that increases the surface area of contact between the insert and the cutter body resulting in good surface finish during slotting, contouring and plunging applications.
The Square T4s strong, reliable pocket seats combined with multi-edge inserts optimize cutting stability and allow for clean 90-degree walls. The inserts mount tangentially in the cutter so that the cutting forces impact the thickest parts of the inserts, allowing manufacturers to achieve the required levels of strength for increased depths of cut with small diameters. The Square T4 also provides a smooth cutting action via positive rake angles with a variable lead angle on the cutting edge.
This T4 Square Shoulder milling cutter is available in T4-08 and T4-12 sizes to bring high metal removal rates and versatility to manufacturers in a wide variety of general milling applications in steels, cast irons and more difficult materials including stainless steels, titanium and heat-resistant super alloys, under appropriate cutting conditions.
The Square T4-08 comes in M08 and MD08 insert geometries and eight different insert grades. Various mounting types include Cylindrical, Weldon, Arbor and Combimaster. Cutting diameters range from 0.625" to 2.5", with a maximum cutting depth of 0.314". Corner radii ranges from 0.016" to 0.063".
The larger Square T4-12 enables a .5" maximum depth of cut for high metal removal rates. It is available in a wide selection of insert grades and geometries, in normal and close pitch versions. Corner radii ranges from 0.031" to 0.125"
Boring requires use of the right tool to achieve the desired hole characteristics of position accuracy, hole geometry and surface finish. Our extensive line of boring heads and bridge bars gives you right solution for your particular holemaking applications.
We offer one-stop shopping for all your boring needs:
And when our standard boring product range meets its limits, we also offer custom boring solutions to meet your difficult machining challenges.
Our broad selection of high quality, easy-to-use reamers are perfect for advanced machining and large batch production.
These holemaking products range from 3 154.5 mm in diameter and feature optimized cutting grades and geometries for achieving high productivity in all workpiece materials.
Seco disc mill holders are for holding disc mills (e.g. Seco disc mills type A) by an adjustable sliding shaft arbor equipped with a driving key.
For machines not equipped with through-the-spindle coolant, rotary coolant inducers for drills provide a means of delivering coolant through the drill. These inducers are available with Graflex back-ends in size 5 or 6 and in five types of front-ends.
Front-end options include: Type BSM/6181-6183 for Type 7 drill shanks, ISO 9766 (Weldon compatible); Type BSM/6100-6101 for Perfomax drills with Type 7 shanks, adjustable +0.8 to -0.3 mm on diameter; and Type BSM/401: for Graflex modular system modules. Inducers are available for manual and automatic tool changers.
These Seco holders and adapters are for mounting bridge bars on machine spindles.
Secos prepared blanks allow customers to produce their own custom tooling solutions.
Depending on machine requirements, HSK Form A, B, D, or E holders must be equipped with a coolant tube or sealing plug.
Seco offers air cooling cones and contact bushes for cooling bells to assist with cooling Shrinkfit holders.
Our range of Shinkfit devices can meet the needs of any manufacturer, offering fast performance and incredibly reliable precision. These systems incorporate automatic heating cycles and efficient cooling cycles that use forced air or water cooling bells. Additionally, the use of stop rods for height setting further ensures stability, reliability and accuracy.
Combimaster is a modular milling cutter system with a wide range of shank types, lengths and interchangeable cutter heads.
Graflexassemblies include arbors, intermediates, toolholders and boring heads that can be rapidly built together when they are needed.
The Seco-Capto modular tooling range uses Polygonal Shank Coupling (PSC) in accordance with ISO 26623 and features a self-locking taper joint.
Seco test bars are primarily used for checking accuracy and to set the axes of the machine tool and tool presetter.
Finned supports are required to provide toolholder positioning onto the support module (corner plate or box) during heating and cooling.
Designed for the Easyshrink 15 device, the universal sliding supports can be equipped with interchangeable support rings to carry any kind of Shrinkfit holder.
Seco finned cooling tubes are designed with fins in contact with the holders front end, offering a large surface area for fast heat dispersal.
Seco offers air cooling cones and contact bushes for cooling bells to assist with cooling Shrinkfit holders.
Secos Z847031 is a user-friendly depth comparator that sets stop rod position for reliable Shrinkfit depth on EasyShrink equipment.
Seco stop screw setting adapters type 05R5600 are used in conjunction with the comparator of the Pack Easyshrink 20 N3. They allow accurate positioning of the stop end screw of Shrinkfit holders.
The stop rod adjusting system allows the shrinking depth of the tool to be set to avoid the use of stop end screws that could generate constraints on the tool shank after the cooling of the Shrinkfit holder.
Available for Easyshrink 20 #3, tool supporting sleeves for stop rods locate the cutter onto the stop rod, freeing both hands when using direct tool-height measuring.
Seco Easyshrink devices are available in automatic and programmable modes. With two families - Easyshrink 15 and Easyshrink 20 - plus a full set of accessories, they fulfill the most demanding customer needs.
Secos range of side lock holders uses side locking screws to secure the tool shank against the bore of the toolholder and offer anti-pull-out protection. This makes the holders very well suited for heavy machining operations.
Easy to mount on a tool cart, Tool Boy allows tool assemblies to be rotated 360 degrees to easily access all features. Assemblies can be rotated on the horizontal plane and secured in the horizontal position, allowing tools to be tightened with substantially less force. This ergonomic and user-friendly design allows for quick assembling and disassembling of cutting tools on toolholders.
Seco shrinkfit holders are the slimmest possible way to hold round tool shanks with high precision and strong clamping forces, all without additional clamping screws or nuts.
