Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SE

Sensor Embedded
location T. Nagar, Chennai, Tamil Nadu

Write a Review
Call Now Call Now

Our Products

  1. Business And Corporate Gifts 14 Products available
  2. Wires 9 Products available
  3. Microcontroller 3 Products available
  4. Electric Circuit Components & Parts 3 Products available
  5. Electronic Development Boards 3 Products available

  6. Telecommunication Equipment & System

    2 Products available

  7. Access Control Reader

    2 Products available

  8. Sensors

    2 Products available

  9. Computer Cables, Adapters & Modules

    1 Products available

  10. Podium

    1 Products available
  11. Others Products 71 Products available

We are leaders in the market for providing best range of RFID TTL WITHOUT EM18 MODULE, ARDUINO NANO CH340 Board, ARDUINO UNO R3 MEGA328P, ARDUINO PROMINI 328 5V16MHZ and PN532 NFC RFID MODULE V3

RFID TTL WITHOUT EM18 MODULE

RFID TTL WITHOUT EM18 MODULE
Leveraging on our extensive industrial experience, we are counted among the most eminent suppliers and traders of a technically advanced array of RFID Reader & Card. Under this category we offer RFID Reader , RFID Reader - Serial Out, RFID Reader - Serial Out, RFID Reader - USB, RFID Reader & Writer 13.56MHz - Uart Interface, RFID Clamshell CardTAG 125kHz, RFID Tag Keyfob (125kHz), MIfare Classic 1k Card 13.56MHz for meeting varied application needs of the customers. All these products work on the modular technology and are highly capable of processing secret tags & codes in readable data. This RFID Reader Module 125Khz is eary to use. It is Low Cost. It gives Serial and Wiegand26 Output. Using the board with microcontrollers to read a card's data is very simple and requires just a serial connection. The board should be powered at 5V, and it requires a direct connection to the microcontroller's Serial(Rx) pin. The card data is transmitted over the serial line when the card is brought near the module. The board has an onboard power indication LED, a LED and Buzzer to indicate the presence of a RFID Card. All the IO pins are brought out to standard clearly labeled header pins, which reduce prototyping time and effort. An output pin (DET) also indicates the presence of a RFID card. The board can also be used to output data in Wiegand format. It can detect cards in the range of 3-8cms. RFID Reader used to read our RFID cards. Using the module with microcontrollers to read a cards data is very simple and required just a serial connection. The module should be powered at 3.3 5.5 VDC, and it requires a direct connection to the microcontrollers Serial Rx pin. The card data is transmitted over the serial line when the card is brought near the module.
View Complete Details
Ask Latest Price & Details
ARDUINO NANO CH340 Board

ARDUINO NANO CH340 Board
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech. FEATURE: Microcontroller Atmel ATmega168 or ATmega328 Operating Voltage (logic level) 5 V Input Voltage (recommended) 7-12 V Input Voltage (limits) 6-20 V Digital IO Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per IO Pin 40 mA Flash Memory 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 1 KB (ATmega168) or 2 KB (ATmega328)
Ask Latest Price & Details
ARDUINO UNO R3 MEGA328P

ARDUINO UNO R3 MEGA328P
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Arduino is an open-source physical computing platform based on a simple io board and a development environment that implements the ProcessingWiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). FEATURES: Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital IO Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per IO Pin 40 mA
View Complete Details
Ask Latest Price & Details
ARDUINO PROMINI 328 5V16MHZ

ARDUINO PROMINI 328 5V16MHZ
It's the Enhancement V2 Pro Mini! It's thin (0.8mm)!This Mini board with a adjustable voltage regulator(you can setting the output voltage by yourself) running the 16MHz bootloader ((select 'Arduino Duemilanove w 328' within the Arduino software). This Pro Mini V2 does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Enhancement V2 Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Enhancement V2 Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. FEATURES: ATmega328 running at 16MHz with adjustable voltage regulator(3.3V5V)USB connection off boardSupports auto-resetMax 150mA outputOver current protectedReverse polarity protectedDC input 5V up to 12V.
View Complete Details
Ask Latest Price & Details
PN532 NFC RFID MODULE V3

PN532 NFC RFID MODULE V3
NFC is a popular technology in recent years. We often heard this work while smartphone company such as Samsung or HTC introduces their latest high-end phones. Almost all the high-end phone in the market support NFC. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. For electronics geeks, we also want to use NFC technology to make our own things. So we build this NFC RFID module. This module is built around NXP PN532. NXP PN532 is very popular in NFC area. And the company offers much technology document to help developers. We developed this module based on the official document. And to make things easier, we also build library for this module. We almost break out all the IO pins of NXP532 on this module. Users could easily connect and play. On this module, I2C is the data Interface by default. With our Ardui-no Sensor Shield V6, it is very easy to plug and play. However, if users want to use other interface such as UART or SPI, this module also makes it easy to break out those pins. FEATURE Gilt PCBWork in NFC Mode or RFID readerwriter ModeRFID readerwriter supports
View Complete Details
Ask Latest Price & Details
Arduino Mega 2560 R3

Arduino Mega 2560 R3
Description: Arduino is an open-source physical computing platform based on a simple io board and a development environment that implements theProcessingWiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can bedownloaded for free (currently for Mac OS X, Windows, and Linux). The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital inputoutput pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila. The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide! Features: ATmega2560 microcontrollerInput voltage - 7-12V54 Digital IO Pins (14 PWM outputs)16 Analog Inputs256k Flash Memory16Mhz Clock Speed
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.