Single-row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other along the bearing axis. The bearings are available in open and sealed designs. Their angular adjustment facility is very limited.

Double-row angular contact ball bearings can support axial loads in both directions and high radial loads. They are particularly suitable for bearing arrangements in which rigid axial guidance is required.

FAG deep groove ball bearings are available in radial and axial designs for many different variants.

Single-row deep groove ball bearings are available in open and sealed designs. They are designed for high to very high speeds and can accommodate radial as well as axial forces.

Double-row deep groove ball bearings correspond with single-row deep groove ball bearings in design and are used when the radial load capacity of single-row deep groove ball bearings is insufficient.

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads.

Four-point contact bearings are single-row angular contact ball bearings and therefore require significantly less space in an axial direction than double-row designs.

The bearings comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. The two-piece inner rings enable a large complement of balls to be accommodated. The inner ring halves are matched to the particular bearing and must not be interchanged with those of other bearings of the same size. The outer ring with the ball and cage assembly can be mounted separately from the two inner ring halves.

Various sizes are supplied in the X-life grade. These bearings are indicated in the dimension tables.

Self-aligning ball bearings are double row, self-retaining units comprising outer rings with a concave raceway, inner rings with a cylindrical or tapered bore and ball and cage assemblies. The bearings are available in open and sealed designs.

Spindle bearings are single-row angular contact ball bearings comprising solid inner and outer rings and ball and cage assemblies with solid window cages. They cannot be dismantled. The bearings are available in open and sealed designs.

Spindle bearings have restricted tolerances. They are particularly suitable for bearing arrangements with very high requirements for guidance accuracy and suitability for high speeds. They have proven ideal for spindle bearing arrangements in machine tools.

Barrel roller bearings are single-row, self-aligning roller bearings. They comprise solid outer rings with a concave raceway, solid inner rings with two ribs and a cylindrical or tapered bore as well as barrel rollers with cages. The bearings cannot be dismantled.

Barrel roller bearings are particularly suitable where high radial shock type loads occur and misalignments must be compensated; see section on compensation of angular misalignments. They have only a low axial load-carrying capacity.

Single-row cylindrical roller bearings with cage are units comprising solid inner and outer rings and cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, and the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling. Cylindrical roller bearings can be supplied with or without a cage

Delivering an outstanding performance: Spherical roller bearings are designed for systems in which high loads must be supported and shaft flexing and misalignments compensated. They deliver extremely high performance and are designed to carry extreme loads

The decades of experience our engineers have gathered combined with innovative ideas improve our spherical roller bearings even further. As a matter of fact, our quest for perfection in development and production ensures optimum kinematics and low wear, which increases the service life even more. And that comes at a low maintenance outlay and minimum maintenance costs.

FAG tapered roller bearings can support high radial and axial loads. They have a broad range of speeds. They are efficient at supporting forces and ensure a precise and rigid shaft guidance system due to the large effective distance between the bearings. Tapered roller bearings can be adjusted and dismantled, which makes mounting easy.

Numerous FAG tapered roller bearing series are available in X-life quality. In order to fulfill the requirements of X-life, the geometry, surfaces, dimensional and running accuracy, and the material and heat treatment process were all optimized. FAG tapered roller bearings in X-life quality increase the overall efficiency of your machines and equipment.

Ultra-Fast, High Volume Refrigerant Recovery At only 24 lbs, the industry-leading G5Twin is the smallest and lightest recovery machine capable of handling the tough demands of industrial/commercial refrigerant recovery - no job is too big for this little beast. Designed for use with all common refrigerants, including R410A, the G5Twin pumps liquid and vapor without throttling. Featuring twin cylinders, twin condensers, a refrigerant-isolated crankcase and a turbine fan blasting over 700cfm of airflow for cool, durable, powerful operation. Features and Benefits Compact and lightweight- Weighs only 24 lbs Twin Cylinders and Twin Condensers for ultra fast recovery Refrigerant-Isolated Crankcase- eliminating bearing contamination Up to 4X Faster Certified Recovery Rates compared to units in its class Automatic Liquid and VaporRecovery- no throttling 7-inch 10-blade turbine fan @ 3000 rpm blasts over 700 cfm of cooling air over the twin heads and condensers Operates up to 50F cooler for maximum reliability and speed even in high ambient conditions Ultra Fast Recovery Rates of 0.62 lbs/minute vapor and 10.36 lbs./minute of liquid(ARI 740-98 Ratings R22)

brass flare nut available in commercial qulaity and forged quality

uniweld digital vacuum gauge uvg2

specification

-range 0-19000 microns

-temp compensated self-calibration

-operating temp -17.8 c to 60 c

-oil filter disk prevents sensor contamination

-sensor withstands overpressure upto 400psi

-large, high-visibility backlit lcd display

- ip65 rated water resistant rubberized housing

UMM-VAC
Uniwelds exclusiveHUMM-VACPumps remove moisture and dehydrate a system quickly and efficiently. The all-metal, heavy duty chassis; powerful, quiet running dual voltage motor; lighter weight and ergonomically designed features make these pumps the #1 choice to go to work with you.

Embraco has a robust portfolio with fixed and variable speed compressors that are approved for natural and transitory refrigerants utilization and may be applied in residential or commercial refrigeration.