Our Products
Conforming to IS 636 Type A | |
ISI marked | |
Rubberised fabric reinforced rubber lined (RRL)Fire Hose. | |
Jacket is made up of 100% Synthetic Yarn for extra strength | |
RRL alone can with stand 100 PSI pressure | |
An external Coat of Synthetic elastomer give protection against moisture and Fungus | |
Heat and abrasion resistance. | |
Available in RED, GREEN, BLUE, YELLOW, ORANGE, BLACK. |
Product Code No. |
Sizes | Working Pressure PSI |
Burst Pressure PSI |
FH-PL-38 | 1 ½” | 205 | 570 |
FH-PL-50 | 2” | 205 | 570 |
FH-PL-63 | 2 ½” | 205 | 570 |
FH-PL-70 | 2¾” | 205 | 570 |
Conforming to BS 6391 Type 1, IS 636 Type A | |
ISI marked | |
Jacket is made up of 100% polyester for extra strength | |
Special quality EPDM rubber as internal lining to with stand heat and polluted water | |
Heat and abrasion resistance. |
Product Code No. |
Sizes | Working Pressure PSI |
Burst Pressure PSI |
FH-SP-38 | 1 ½” | 205 | 570 |
FH-SP-50 | 2” | 205 | 570 |
FH-SP-63 | 2½” | 205 | 570 |
FH-SP-70 | 2¾” | 205 | 570 |
|
DIFR Tested & TAC Approved | |
Synthetic polyvalent foam forming liquid, psuedo-plastic consisting of surface active substances andpolymer additives. | |
Having good resistance to contamination of hydrocarbons and to dehydration of polar solvents. | |
It is to be used in 3% concentration on hydrocarbons and at 6% concentration on polar solvents. |
Inlet and outlet connections | |
Foam induction rates can be adjusted from 0% to 6% | |
Body material : Aluminium | |
Inbuilt non return valve to foam inlet | |
Foam concentrate drawn through a Pick up tube | |
Light weight, portable |
Complete With DCP Containers, Nitrogen Cylinder, & Valve Assembly | |
Can Be used as a compact stationary fire extinguisher , used with Hose reel or used with fixed installation DCP System | |
Agent Capacity of 150 to 3000 Pounds or 68 to 1360 Kg. | |
Optional Hose reel , Selector Valves , Skid Mounting, trailer Mounting . |
Newage Hose Cradle is free swinging type with180 movement. | |
suitable for storing 2 X 30 mtr fire hose. | |
Suitable for to install next to Dry Riser or Wet riser Outlet. |
2 nos 2 X 30 mtr fire hose with Aluminum coupling | |
150 ltr FRP foam tank | |
2 BSP threaded Inlet | |
One Low expansion branch pipe of 60 GPM Capacity | |
60 GPM@ 100PSI Foam Inductor adjustable 3% to 6% | |
S.S pick up tube | |
Cabinet made fro 1.6 mm CRCA sheet | |
Finished by P.O Red colour |
It is a water turbine driven centrifugal Pumps | ||
Turbine inlet and outlet-2 male and female Instantaneous | ||
Pump Outlet -2 female Instantaneous as per BS33 | ||
Strainer Brass | ||
Feed Water Flow- 225 GPM @100 PSI | ||
Floodwater Flow- 330 GPM @ 30 PSI |
For fixed installation systems | |
With 3 to 6% foam induction | |
Available in wide range of flow | |
Carbon steel construction treated with anti corrosive coatings | |
Flanged inlet & outlet connection as per ANSI |
Inlet Connection | 2 Instantaneous | |
Material | Aluminum Alloy Or Stainless Steel | |
Working Pressure | 145 PSI Max. | |
Foam Expansion | 8 to 10 times | |
Foam Induction | Available with foam inductor or without foam Inductor |
Construction in Gunmetal as BS1400 | |
Jet spray & shut off Type | |
Crome Plated Finish |
stainless Steel tank | |
Slim line , Compact design | |
Low center of gravity, make steering easier | |
Unit equipped with foam inductor, low expansion branch pipe , Fire Hoses | |
Suitable for all type of foam concentrates | |
Low Maintenance |
Available in SS, CS and Gunmetal | |
Available in Electric or hydroelectric Remote operation. | |
Negligible Maintenance cost. | |
Dense fog angle up to 1600 | |
Electric version available in AC / DC Power supply. | |
Available in different flow range. |